Honeywon's silicone sponge Silicone rubber foam pad silicone rubber sponge sheet silicone rubber sponge mat silicone rubber sponge blanket silicone rubber foam mat silicone rubber foam blanket is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50C
~+200C protect and heat insulation for long term continuous use and -70C ~ +260C for intermittent
Use on all kinds of machine.
Special size(mm):+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color:+ red/grey/natural, white/black or any other required color
Application: + heat transfer print equipment, electronics and electrics, machine and sealcharacter: +high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
Silicone rubber sheet for acf bonding or cushion sheet. High thermal conductivity and high performance
From low price to high price according to requirements.
Normal thickness is 0.2mmt ~ 0.5mmt with 1450mm width
Cushion sheet and release sheet and acf bonding of olb, cof, fog for lcd/tsp
Depends on quantity, use hard paper carton or wooden packing
We are a professional supplier & exporter of rubber and plastic products in china.
We can help you supply the high quality silicone membrane special for vacuum laminating machine, vacuum machines copper clad laminate, laminated solar machine, special press machine for glass and door industrial
Material: chinese silicone or germany silicone
Color: translucent, grey
Tensile strength: 7.5 - 12mpa,
Hardness: 45-50shore a,
Elongation: 400% - 740%,
Density: 1.3g/cm3,
Tear strength: 26-42n/mm
Maximum temperature resistant: 260^c
Thickness: 1, 2, 3, 4mm,
Width: 0.5-3.8m,
Length: 5-20m,
Remark: germany silicone for +/- press, chinese silicone for ¡§c press only
Maximum 3.8m without joint
128655 Silicone Rubber Sheets Suppliers
Short on time? Let Silicone Rubber Sheets sellers contact you.
High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products.
Description
GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding.
Features
Excellent process ability
Excellent mechanical and electrical properties
High tensile strength
FDA & FLGB grade
Applications
Kitchenware, bakeware
Skin cover for mobile devices
Tubes, sealing
Feature of Silicone rubber thermal conductive insulation pad
High compressibility, soft and flexible
Natural stickiness, no extra surface frontal adhesives
Good thermal conductivity,
Meet With RoHs standard
High thermal conductivity
High conformability to uneven surfaces at low stress application
Electrical isolating Very cost effective
Application of High quality silicone rubber thermal conductive insulation pad
1. Heat sink your CPU/GPU
2. Switching power supply
3. Video equipment
4. Mobile equipment
5. Communication equipment
6.Between semiconductor/magnetic components and heat sinks.
Packing Details : Packing, solid bicycle saddle, 50pcs/carton
Delivery Details : 3-30 days after order of Solid bicycle tire tubes
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Peroxide and platinum cured polymers, both of which can meet food quality requirements.
Hardness range: 35-85 Shore A
Colours available:
Translucent
White
Black
Grey
Red oxide
Bright red
Green
Yellow
Blue
Colour matching available on request.
Drawings:
Please click following links for the drawings of our stocked silicone extrusion profiles.
drawing 1 to 4.
drawing 5 to 8.
drawing 9 to 12.
drawing 13 to 15
Temperature resistance:
-50 to +260 Degrees Centigrade (up to 300C for short periods)
Sizes available:
Flat strips are available in continuous lengths up to 80mm wide. Minimum thickness 0.5mm.
Cords and tubes are available up to 60mm Diameter. Minimum tube ID is 1mm
Joining:
Most profiles can be joined to form endless seals.
Hollow and solid O rings are available in a wide range of sizes.
Most profiles can be joined to any required angle to form (for example) rectangular gaskets.
Insertion rubber sheet
General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet.
It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads.
Thickness range from 1mm to 50mm.
Width available are 1m to 2m or cutting to other width according to your requirement.
Smoothly glossy finish or both side fabrics impress on finish. Continuous length.
Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips.
We currently supply below sizes as stardard for your selecting:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Color available is black,red,white,blue,green etc.
TYPICAL PHYSICAL PROPERTIES AND VALUES:
Hardness, Shore A +/-5 65
Specific Gravity (DENSITY) 1.5g/cm3
Tensile Strength 4mpa
Enlongation Break 250%
Compression set maximum 20%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break Change 25%
Handness Change 15%.
Other specifications we can produce per your request.
Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished
SBR Rubber sheet
SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.
Applications:
SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.
Size:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Finish:Smoothly finished or both side fabrics impress on finished.
Insertion:common cloth insertion or nylon fabric insertion
Color available is black,red,white,blue,green etc.
Product features:
1.Extremely high heat transfer, heat resistance and buffer.
2. Not to FPC, Glass and other damage.
3. The heat has super stable characteristics and the pressure on the product consistency.
4. High resilience and non-stick.
5. Antistatic, no powder on the surface.
Product specifications:
1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m).
2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg.
3, the products are divided into common type SG (gray) and anti-static SGB (black).
4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand.
Product application:
COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc..
Product application:
application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role.
We are very well producer of rubber roll sheet in Korea for satisfying the requirements below conditions
Thickness:10~80mm
Width: Min 910~ Max1,500mm
Length: 10~30m
Color: as your request excepting white
Material: Natural rubber, SBR, EPDM as your request
