Silicone Rubber Extrusions

NE-5130 NE-5140 NE-5150 NE-5160 NE-5170 NE-5180 Appearance milky-white,light-yellow,light-gray Density g/cm3 1.09í+0.05 1.13í+0.05 1.15í+0.05 1.18í+0.05 1.21í+0.05 1.25í+0.05 Hardness Shore A Points 30í+3 40í+3 50í+3 60í+3 70í+3 80í+3 Tensile Strength MPaí¦ 5.0 6.0 7.0 7.0 6.5 6.0 Elongation at Breakage % í¦ 440 380 320 280 200 150 Tension Set % í_ 8 9 10 10 9 8 Tear Strength kN/m í¦ 15 16 18 18 16 15 First vulcanization condition for test piece: 175íµí-5min Vulcanizator: 80% DMDBH,quantity added 0.65% 20kg/box

Supplier: Silicone rubber sealing, silicone rubber gaskets, silicone o ring, silicone straw, silicone rubber grip, silicone sleeve, silicone cover, silicone rubber bumpers, silicone rubber feet, silicone rubber anti slip mat, silicone rubber grommet, silicone rubber washer, silicone pets products, silicone baby products, silicone rubber to metal bonded parts, silicone rubber cap, silicone rubber plug, silicone rubber dust cover, silicone rubber bellow, silicone rubber connector, silicone tubing, extrusion sealing, silicone rubber hose, silicone bar, silicone strip

Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A. Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black. The dimensions for silicon rubber sheet of our stock stardard is in the following: 500mmx500mmx0.5mm 800mmx800mmx1.0mm 1000mmx1000mmx1.5mm 1000mmx10mx from 1mm to 20mm 1200mmx10mx from 1mm to 20mm 1500mmx10mx from 1mm to 5mm 1800mmx10mx from 1mm to 5mm 2000mmx10mx from 1mm to 5mm The specification of most standard silicone sheet we produce are as below: Density:1.25 g/cm3 Handness:55 Shore A Tensile strength:7.0 mpa Elongation at Breakage:320% Tension Set:8% Tear Strength:20 KN/M Heat Resistant: 200 C Sizes Thinkness tolerance(+/-mm) 10mx1m or 1.2mx1mm 0.1 10mx1m or 1.2mx2 to 6mm 0.2 10mx1m or 1.2mx7 to 10mm 0.3 The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request. Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet. Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial. Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade. Sponge Silicone Rubber Sheet 100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished. Our sponge silicone sheeting is available in four standard colours white, red oxide,black. The dimensions for sponge silicon rubber sheet of our stock stardard is in the following: 1000mmx1000mx from 3mm to 20mm 2000mmx1000mx from 3mm to 20mm 5000mmx1000mx from 3mm to 20mm The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request. Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard. Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.

Insertion rubber sheet General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet. It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads. Thickness range from 1mm to 50mm. Width available are 1m to 2m or cutting to other width according to your requirement. Smoothly glossy finish or both side fabrics impress on finish. Continuous length.

Neoprene Rubber sheet Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips. We currently supply below sizes as stardard for your selecting: 1000mmx1000mmx1mm to 50mm 1200mmx1200mmx1mm to 50mm 1000mmx10mx from 1mm to 25mm 1200mmx10mx from 1mm to 25mm 1500mmx10mx from 1mm to 20mm 1800mmx10mx from 2mm to 20mm 2000mmx10mx from 2mm to 20mm Color available is black,red,white,blue,green etc. TYPICAL PHYSICAL PROPERTIES AND VALUES: Hardness, Shore A +/-5 65 Specific Gravity (DENSITY) 1.5g/cm3 Tensile Strength 4mpa Enlongation Break 250% Compression set maximum 20% Heat Aging(70 Cx72hours) Tensile Strength Change 20% Elongation Break Change 25% Handness Change 15%. Other specifications we can produce per your request. Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished

SBR Rubber sheet SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength. Applications: SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications. Size: 1000mmx1000mmx1mm to 50mm 1200mmx1200mmx1mm to 50mm 1000mmx10mx from 1mm to 25mm 1200mmx10mx from 1mm to 25mm 1500mmx10mx from 1mm to 20mm 1800mmx10mx from 2mm to 20mm 2000mmx10mx from 2mm to 20mm Finish:Smoothly finished or both side fabrics impress on finished. Insertion:common cloth insertion or nylon fabric insertion Color available is black,red,white,blue,green etc. TYPICAL PHYSICAL PROPERTIES AND VALUES: Hardness, Shore A +/-5 60 Specific Gravity (DENSITY) 1.6g/cm3 Tensile Strength 3mpa Enlongation Break 250% Heat Aging(70 Cx72hours) Tensile Strength Change 20% Elongation Break 25%. Other specifications we can produce per your request.

High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products. Description GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding. Features Excellent process ability Excellent mechanical and electrical properties High tensile strength FDA & FLGB grade Applications Kitchenware, bakeware Skin cover for mobile devices Tubes, sealing Product Data Item Standard (GB/T) 2031P 2041P 2051P 2061P 2071P 2075P 2081P Appearance Transparent Linear shrinkage (%) 130mm 130mm 3.6 3.6 3.5 3.5 3.4 3.3 3.3 Hardness (Shore A) 531.1-2008 31 42 51 62 71 75 81 Tensile strength (MPa) 528-2009 8.2 10.2 10.4 10.1 10.0 9.7 9.0 Elongation (%) 528-2009 759 652 570 462 369 310 205 Tensile set (%) 528-2009 6.0 3.6 4.0 5.6 5.2 3.6 2.8 Tear strength (KN/m) 529-2008 24 28 32 32 31 28 26 Curing agent: C-15, 2%; Curing condition: 170 ºC 10mins, Post cure: 200 ºC 4 hours Storage: Store in a cool and dry place, out of direct sunlight Package: 20Kg/carton or 600Kg/box