Insertion Rubber Sheet

Neoprene Rubber sheet

Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips.

We currently supply below sizes as stardard for your selecting:

1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm

Color available is black,red,white,blue,green etc.

TYPICAL PHYSICAL PROPERTIES AND VALUES:

Hardness, Shore A +/-5 65
Specific Gravity (DENSITY) 1.5g/cm3
Tensile Strength 4mpa
Enlongation Break 250%
Compression set maximum 20%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break Change 25%
Handness Change 15%.

Other specifications we can produce per your request.


Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished

SBR Rubber sheet
SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.

Applications:
SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.

Size:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm

Finish:Smoothly finished or both side fabrics impress on finished.
Insertion:common cloth insertion or nylon fabric insertion
Color available is black,red,white,blue,green etc.

TYPICAL PHYSICAL PROPERTIES AND VALUES:

Hardness, Shore A +/-5 60
Specific Gravity (DENSITY) 1.6g/cm3
Tensile Strength 3mpa
Enlongation Break 250%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break 25%.

Other specifications we can produce per your request.

Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.

Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.

The dimensions for silicon rubber sheet of our stock stardard is in the following:

500mmx500mmx0.5mm
800mmx800mmx1.0mm
1000mmx1000mmx1.5mm

1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm

The specification of most standard silicone sheet we produce are as below:

Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C

Sizes Thinkness tolerance(+/-mm)

10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3

The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.

Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.

Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.

Our sponge silicone sheeting is available in four standard colours white, red oxide,black.

The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:

1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm

The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.

Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.

Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.

Our capabilities:

Peroxide and platinum cured polymers, both of which can meet food quality requirements.
Hardness range: 35-85 Shore A

Colours available:

Translucent
White
Black
Grey
Red oxide
Bright red
Green
Yellow
Blue

Colour matching available on request.
Drawings:

Please click following links for the drawings of our stocked silicone extrusion profiles.

drawing 1 to 4.
drawing 5 to 8.
drawing 9 to 12.
drawing 13 to 15

Temperature resistance:

-50 to +260 Degrees Centigrade (up to 300C for short periods)

Sizes available:

Flat strips are available in continuous lengths up to 80mm wide. Minimum thickness 0.5mm.
Cords and tubes are available up to 60mm Diameter. Minimum tube ID is 1mm

Joining:

Most profiles can be joined to form endless seals.
Hollow and solid O rings are available in a wide range of sizes.
Most profiles can be joined to any required angle to form (for example) rectangular gaskets.

We are the manufacturer & exporter of all kinds of rubber sheets, rubber compounds, reclaimed rubber, crumb rubber, rubber chemicals & all other related products like precured tread rubber

50 kg

Rubber Sheet: Nature Rubber, Viton Rubber, EPDM

Use of Sheets: Automobile Industry, Construction industry, Space industry etc.

Sample Service: Free Samples

Good quality and sell well

We provide raw materials for some large-scale factories in Europe.

Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.

Feature:

Standard size(mm)+ 290*380*¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)

Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0

Product color+ red¼grey¼natural, white¼black or any other required color

Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.


+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm

Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949


Polybags and pallets