A182 F51 Duplex Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
Supply Superfine Silica Nano Quartz Powder Price High Purity Sio2 Low Iron Quartz Silica Sand Processing Plant Key attributes Industry-specific attributes SiO2 Content (%) 98.75 Fe2O3 Content (%) 0.311 Al2O3 Content (%) 0.46 MgO Content (%) 0.01 CaO Content (%) 0.01 P2O5 Content (%) 0.01 Other attributes Place of Origin Egypt Brand Name Silica Gravel water filtration, 7-7-2020 Model Number M-7-7-2020 Type Silica Quartz Application Glass Grade Silica Oxide Micro Fine -400 Size All Size Available Organic Materials Free Gradation Well Processing High color off white Radiation free heavy metals free nature natural not crushed Reserve Enough Reserve specific Gravity 2.50-2.80 Packaging and delivery Packaging Details -bulk in vessel 2-pp big bags of 1250 kg -1500 kg 3-in 20 feet container,load 25-27 tons 4-number of bags in 20 feet 19-20 bags Port Egyptian Port Supply Ability Supply Ability 9000 Metric Ton/Metric Tons per Month
Natural Process Yellow Silica Sand According To EN12904 and AWWA Standard Silica Sand For Water Filtration Key attributes Industry-specific attributes SiO2 Content (%) 98.75 Fe2O3 Content (%) 0.311 Al2O3 Content (%) 0.46 MgO Content (%) 0.01 CaO Content (%) 0.01 P2O5 Content (%) 0.01 Other attributes Place of Origin Egypt Brand Name Silica Sand water filtration, 5-7-2020 Model Number E-5-7-2020 Type Silica Quartz Application Glass Grade Silica Oxide Micro Fine -400 Size All Size Available Organic Materials Free Gradation Well Processing High color off white Radiation free heavy metals free nature natural not crushed Reserve Enough Reserve specific Gravity 2.50-2.80 Packaging and delivery Packaging Details -bulk in vessel 2-pp big bags of 1250 kg -1500 kg 3-in 20 feet container, load 25-27 tons 4-number of bags in 20 feet 19-20 bags Port Egyptian Port Supply Ability Supply Ability 9000 Metric Ton/Metric Tons per Month
Silica Sand Egyptian Origin Natural Yellow Silica Sand for Water Filtration Sand EN and AWWA Size 0.50mm-1mm Key attributes Industry-specific attributes SiO2 Content (%) 98.75 Fe2O3 Content (%) 0.311 Al2O3 Content (%) 0.46 MgO Content (%) 0.01 CaO Content (%) 0.01 P2O5 Content (%) 0.01 Other attributes Place of Origin Egypt Brand Name Silica Sand water filtration, 5-7-20201912 Model Number E-5-7-20201912 Type Silica Quartz Application Glass Grade Silica Oxide Micro Fine -400 Size All Size Available Organic Materials Free Gradation Well Processing High color off white Radiation free heavy metals free nature natural not crushed Reserve Enough Reserve specific Gravity 2.50-2.80 Packaging and delivery Packaging Details -bulk in vessel 2-pp big bags of 1250 kg -1500 kg 3-in 20 feet container,load 25-27 tons 4-number of bags in 20 feet 19-20 bags Port Egyptian Port Supply Ability Supply Ability 9000 Metric Ton/Metric Tons per Month
The series 610 low differential pressure transmitters are capable of measuring the pressures and flow of air or non-conducting gases at high resolutions. Designed specifically for clean rooms, isolation rooms, and other critical environments, the series 610 uses an improved all stainless steel micro-tig welded sensor to detect differential pressure and convertthis pressure into a linear dc electrical signal by a unique electrical circuit. This unit is ideal for situations when accurate and reliable pressure monitoring is essential. Easy access pressure ports and electrical connections, removable process heads, and detachable terminal blocks make for fast and easy installation. The series 610 transmitters are available for air pressure ranges as low as 0.1 in w.C.Full-scale. -
1. Excellent photodiod 2. 1310nm and 1550nm two mode receiver 3. 862MHZ bandwidth,Bi-directional transmission 4. High reliability 5. GaAs amplifier module,4 high level output ports, low distortion 6. Excellent switching power supply 7. Return path optical transmitter: FP , DFB , CWDM available Specifications: Forward path Item Unit Specification Remark Optical Optical Wavelength nm 1310 or1550 Optical Input Power dBm +1.5 -5 Optical Connector FC/APC or SC/APC Optical Link Frequency Response dB í+1.5 Output level dBµV >104 Optical input power -1 dBm Return Loss at Output dB í¦16dBí_550MHz í¦14dB550-860MHz C/N dB í¦51 1) Connected with TOT13 optical transmitter,10KM opticalfiber plus the loss of optical passive,4%OMI. 2) RF output levelí¦104dBuV,optical input power -1dBm. CSO dB í¦60 CTB dB í¦65 Reverse Path Parameter Unit Specification Remark DFB FP RF Input dBmV 18 18 Optical Output Power mw 1~4 1 Input Return Loss dB
Features: 1) High quality, high linearity DFB laser 2) Advanced pre-distortion function 3) 1U, 19 inch standard chassis, 220VAC, 50Hz switching power supply or others. 4) 750 or 862 MHz bandwidth, supporting most broadband transport applications. 5) Unique thermal design provides superior heat dissipation, increasing the reliability of your system. 6) Automatic gain control helps maintain constant RF drive level to laser for consistent performance. 7) An interface LCD display allows you to monitor the transmitters performance. In addition, RS232 helps you monitor your transmitter performance in a long-distance Specifications Item Unit Specification Bandwidth MHz 47-750 or 860 Optical Wavelength nm 1310 (í+ 20) Optical Output Power (í+ 0.25 dB) (4~20mW) all series Safety Power Shutdown Yes Input RF Power, Main (í+ 0.1 dB) dBµV 72.0(+3/-2) Isolation, Auxiliary to Main Input dBc -32 AGC Input Range dB í+ 3 Response Flatness (maximum) dB í+ 0.75 Response Slope dB 0 to 0.75 Input Impedance ª+ 75 Input Return Loss dB >14 RF Test Point (í+ 1.0 dB) dB -20 Carrier-to-Noise Ratio (CNR) dB >51.0 Composite Second Order (CSO) dBc í_60 Composite Triple Beat (CTB) dBc í_65 Powering V AC220í+10% Power Consumption (maximum) W 40 Mechanical Specifications Optical Connector FC/APC, or SC/APC RF Connector F-Type Dimensions (height í- width í- depth) cm 4.3í-48.5í-30.0 Environmental Specifications Ambient Temperature -25+65 Operating Temperature Range 0-50 Notes: Optical link budget that provides a C/N of 51 dB when loaded with 59 PAL-D channels over a 10km single fiber. Composite Triple Beat (CTB) is 65dBc typical (all models) Composite Second Order (CSO) is -60dBc typical (all models) Specifications are subject to change without notice. 6KG
Comodity: Refined Cane Sugar - ICUMSA 45 . Origin: Brazil. Shipment: Bulkship. Inspection: by SGS or equivalent at loading port at the expense of the Seller; all costs in the loading port are the Seller´s expense. Prices: USD$ p/mt : Any target also are welcome Minimum quantity: 12500 Payment: SBLC OR 100% LC . Destination & Delivery Destination: CIF ASWP. Delivery Terms: Specify the number of days required to ship 30-45 days after receipt and acceptace of Financial Procedures for the bank of the Seller.
HR Coils :- THICKNESS : 2.5 MM / 3 MM / 4 MM / 5 MM / 6 MM / 8 MM / 10 MM / 12 MM , WIDTH : 1250 MM / 1500 MM , LENGTH : CUSTOMIZED , GRADE : IS2062E250 BR , IS2062 E 350 BR HR Sheets :- THICKNESS : 12 MM / 16 MM / 20 MM / 22 MM / 25 MMM / 28 MM / 30 MM / 32 MM / 36 MM / 40 MM / 45 MM / 50 MM / 56 MM / 63 MM / 70 MM , WIDTH : 2000 MM / 2500 MM , LENGTH : 6300 MM / 12000 MM , GRADE : IS2602E250 BR / IS2062 E 350 BR
Sugar icumsa 45, sugar icumsa 1500- 2500.Import export and international business
Vinyl end phenyl silicone oil CAS No. 68951-96-2 Chemical structure: Vi(CH3)2SiO[Si(CH3)2O] M [Si(C6H5)2O]mSi(CH3)2Vi Product model: KKM-1527 Performance indicators: (appearance, clear and transparent, no odor) (viscosity (25), 3050mPas) (phenyl content, 35%(mol)) (refractive index 1.53) (vinyl content 0.78%) (volatile content 0.92, (150, 3h) %) (The above is a typical index, the company can also be customized according to customer requirements of various viscosity specifications end vinyl silicone oil) This product is mainly used for manufacturing high-power LED silicone packaging adhesive, filling, sealing, bonding and coating in photoelectric, electronic and micro-electronic industries, high light transmittance, high hardness lenses and other uses developed by users themselves. Matters needing attention The product should be prevented from moisture immersion during storage and use. This product should not be mixed with other oils in the process of use so as not to affect the use effect. Package is installed 5kg, 20kg, 200kg plastic drum
Commodity: Zinc Ore Concentrated, Zn >40% To >52%. Rej. Zn 40.00% To >52.00% - Rej. Zn
Manufacturing Standards of ASTM A182 Flanges ASME/ANSI B16.5 Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500 ASME/ANSI B16.47 Blind Flange [Series A & B],Welding Neck Flange PRESSURE CLASS 75, 150, 300, 400, 600, 900 ASME/ANSI B16.36 Orifice Flange PRESSURE CLASS 300, 400, 600, 900, 1500, 2500 BS 4504 SEC 3.1 Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, PRESSURE CLASS PN 2.5 TO PN 40 BS 4504[PART 1] Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, PRESSURE CLASS PN 2.5 TO PN 400 BS 1560 BOSS Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
Standards ASTM A182 / ASME SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2â?³ (15 NB) to 48â?³ (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM A182 / ASME SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM A182 / ASME SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM B564 / ASME SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM B564 / ASME SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM B564 / ASME SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Standards ASTM B381 / ASME SB381 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc Size 1/2 (15 NB) to 48 (1200NB) Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
