14 slots media converters Ain features The power of the rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the rack. Supplying the converters or powers to be plugged and played. It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance 2u high: 19-inch standard design Technical specifications Capacity : 14 slots available Power: input: ac 100 ½ 260v, 50½60hz Output: dc +5v 12a Power protection: protection from over voltage, over current and short circuit Working temperature¦0½50µ Storage temperature¦-20µ½70µ Relative humidity¦5%½95% Dimensions: 485 (wide) ß 245 (length) ß 90 (high) mm
Lnk-277 series is an industrial grade rs-232 / rs-422/ rs-485 to fiber optic converter which converts a standard rs-232 / rs-422 / rs-485 transceiver to a fiber optic link as to extend the serial signal up to 2km on multimode fiber and 80km on single mode fiber. This unit is enclosed in an industrial wall mount compact size rugged steel case. StandardEia /tia rs232, rs-422, rs-485 Fiber connectorSc standard, st/fc optional Fiber distance50/125um mmf: 2km, 62.5/125um mmf: 5km, 9/125 smf:20/40/60/80km Serial connectorRs-232: db9, rs-422, rs-485: phoenix terminal Serial distanceRs232: 15 meters, rs-422, rs-485: 1500 meters Rate0-120kbps Baud rate300 baud to 115, 200 baud Rs-232In, out, gnd Rs-485D+, d-, gnd Rs-422R+, r-, t+, t-, gnd Power supplyDc2.5 5v(9v-48v) Power rate2w Static protection15kv electric static discharge (esd) protection Surge protection1500w/sec surge protection Operation temperature-25°c to +70°c Storage temperature-40°c to +85°c Storage humidity5%~90% non-condescending Dimensions110(l)*104(w)*28(h) mm Weight0.3kg/pcs Standard packaging: carton packaging(support customer logo)
LNK-GY1100 series of Industrial Media Converter are hardened devices designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments. Eliminate EMI and RFI issues or overcome distance limitations with copper based cabling by using the Industrial Media Converter to convert your copper based equipment over to fiber optics. The media converter can connect to either 10Base-T or 100Base-TX ports and provides a 100Base-FX fiber optic connection for links up to 120 km. E-link LNK-GY1100 is a high-speed 10/100Base-TX Industrial Ethernet Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long distance, high speed, wide broadcast. LNK-GY1100 supports 1 TP ports and 1 fiber ports. TP (RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection;100Base-FX supports single-/multi-mode, SC/ST connector, SFP Slot optional. LNK-GY1100 adopts industry standard design, IP40 protection, power supply input 24VDC (18~36VDC), -40 to 80°C working temperature. Ethernet Standards: IEEE802.1 10Base-T, IEEE802.3u 100Base-TX IEEE802.3 100Base-FX IEEE802.3X Flow Control Processing Type: Forward Half-duplex, Full-duplex Forward Filter Rate:: 148,800pps (100Mbps) Cabling: 100Base-TX: Cat5 or above Maximum Distance: Cat5 UTP up to 100m Connector: 1x RJ45 Optical Port: 100Base-FX ports (SC/ST/FC/LC connector, SFP Slot, optional) Environmental Operating Temperature: -40°C to 80°C (-40°F to 176°F) Storage Temperature: -40°C to 85°C (-40°F to 185°F) Relative Humidity: 5% to 95% non-condensing MTBF: > 300,000 hrs Electrical and Mechanical Input Power: 24VDC (18~36VDC, 6-Pin Terminal Block) Power Consumption: 12W Max. 0.5A@24VDC LED Indicators PWR: Power Status RUN: Link/Activity, Speed FX: Link/Activity Dimensions (WxDxH): 112 x 138 x 42mm Weight: 480g Casing: Aluminum Case Mounting Options: Din-Rail mounting, Wall mounting Regulatory Approvals Safety: UL 60950-1 EMS: EN61000-4-2 (ESD)Level 3, EN61000-4-3 (RS),Level 3, EN61000-4-4 (EFT),Level 3, EN61000-4-5 (Surge);Level 3, EN61000-4-6 (CS),Level 3 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A Industry: IEC61000-6-2 Rail: EN50155, EN50121-4 Traffic: NEMA TS-2 Standard Packaging: Carton packaging(Support customer Logo)
Media converter desktop 1 u 10/100/1000mbps sc/fc single mode/multi-mode 1/2 core 2~120km ac/dc internal/external power Standard export carton packing
14 Slots Media Converters Rack It is acceptable for the most 14 sets of 10M, 10/100M 10/1001000MMedia Converters within a rack-mountable chassis which is supplied with unified power. Installing at the center of network, the Rack not only reduce the links, simplify the structure, but also ease for management and maintenance. Main features: The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK. Supplying the Converters or Powers to be plugged and played. It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance 2U high: 19-inch standard design Technical Specifications: Capacity : 14 slots available Power: Input: AC 100 ¡« 260V, 50¡«60HZ Output: DC +5V 12A Power protection: protection from over voltage, over current and short circuit Working temperature: 0¡«50 Storage temperature: -20¡«70 Relative Humidity: 5%¡«95% Dimensions: 485 (wide), 245 (length), 90 (high) mm.
Features: -Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward. -Cache size: 256KB, address table size: 4KB -Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters -Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d -Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function -Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate. -TX/RX dual-header Standard SC interface -Electronical interface supports 10Mbps, 100Mbps, 1000Mbps -Automatically adapt , optical interface work rate 1000Mbps port -Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission -Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status. -Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs -Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V) -Over 50,000 hours consistent working period. Transmission fiber: Multi-mode: 50/125, 62.5/125 or 100/140166;204;m Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m Operating temperature :0-50 161;227; C Storage temperature: -40-70 161;227; C Humidity: 5% -90% non condensing.
1x Multimode Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. Equiped with high-quality chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte. Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Only 93mm x 72mm x 27mm(3.7"x 2.8"x 1.1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space. Product List: 1x Gigabit Ethernet Media Converter, 1x 1000Base-SX SFP module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee, lifetime tech support.
DaShi ANYK-R17 Rack System is a configurable media converter rack that can host 16 slots of media converters and 1 slot net manage card.A wide range of media converters is available depending on your variety of network cabling environment. These optional media converters include UTP to multimode or single mode fiber cable. The Chassis provides a central power supply to the converters and serves as a converter center and wiring concentrator. 1. Hot Swappable The design of the power system is based on an idea of providing maximum flexibility and redundancy. In this way, you may remove any of the two power supplies without turning off the system. 2. Redundancy During operation, both power supplies are switched on and share the current load. In case that one of them should fail, the other will instantaneously take 100% of the load without any loss. Similarly, if one power supply is removed from servicing, it can be switched off and removed while the chassis continues 3.functioning. 3. Protection System The power of each converter bay comes from the two shared power supplies. Each bay is isolated from each other under a certain protection mechanism, so that it is free from any problem that might occur to the power supplies or faulty converter bay. This is the best solution to protect your investment in media converters. 4. Media Converters The functions of all 16 slots in ANYK-OaxxH-x-1-1M are identical. 2U Media Converter Moule series can work independently and be installed into any available slot of ANYK-OAxxH-x-1-1M; Parameter: shape size: 426mm*278mm*88mm* (internal power supply ) weight: 5KG power source: 100v-275VAC, 50-60Hz ,100A Operation Temperature:0ípC-60ípC Humidity:5%-95% Storage Temperature:-10ípC-70ípC Application: WAN and LAN system( FTTB,FTTH ) ISP suppliers
1000M Dual Fiber FC External Power Fiber Optic Media Converter We supply various fiber optic media converters with competitive price. Features 1. Origin: China, factory price, three years warranty 2. Full duplex flow control, half duplex back pressure 3. Auto-negotiation of 10/100/1000 Mbps rate and Auto-MDI/MDIX for TX port 4. Auto-detection of half/full duplex transfer mode for TX port 5. Provide switch configuration of half/full duplex transfer mode for FX port 6. Transmission distance up to 2km for multimode fiber and 20-120km for single mode fiber 7. Easy-to-view LED indicators provides status to easily monitor network activity 8. Compliant with FCC, 15 CLASS A, RoHS, CE MARK and IEEE 802.3 9. Packaging: 44 boxes/carton, size 62x43x34.5cm, gross 22kg Applications 1. FTTH application 2. Gigabit Ethernet, GPON, EPON 3. Telecommunication and fiber optic data transmission networks 4. Wide Area Networks (WAN), Local Area Network (LAN), CATV Network Technical Parameters Standard Protocol 100M 1000M IEEE802.3 10 Base-T IEEE802.3 1000 Base-T IEEE802.3u 10/100Base-TX/FX IEEE802.3u 10/100/1000Base-SX/TX IEEE 802.3d IEEE802.1q, IEEE802.1p QoS, IEEE802.1d IEEE 802.3Q IEEE 802.3z, IEEE 802.3ab LED Indicators POWER, FPL, 10/100, FRX, TRX, FDX POW, FDX, TX Link / ACT, SPD, FX Link / ACT Power Supply external: DC-48V, DC24V, DC12V, DC5V external: 5V DC 2A internal: AC110-250V/50Hz, DC -32~-72V internal: AC 100-250V/50~60Hz, DC -36~-72V power consumption ¡¡¡ì15W power consumption ¡¡¡ì15W Band Width optical port: 155Mbps optical port: 1.25Gbps RJ 45 port: 10/100Mbps Operation Mode Full / half duplex mode Ports UTP RJ-45, SC/ ST/ FC/ LC fiber connector Wavelength multimode 850nm, single mode 1310/1550nm Operation Temperature 0¡ãC~50¡ãC Storage Temperature -40¡ãC~70¡ãC Humidity 5%~90% non-condensing Twisted Pair Cable Cat5 UTP cable (the max distance up to 100m) Fiber Cable 9 / 125|¡¡ì¬m single-mode cable provides long distance for 20/ 40/ 60/ 80/ 120 km 50/125, 62. 5/125|¡¡ì¬m multimode cable up to: 2km/ 5km(100M), 220m/ 550m(1000M) MTBF >50000 hours Dimension external power: 94*70*25 mm (3.7*2.8*0.98 inch) internal power: 140*110*30 mm (5.5*4.3*1.2 inch) plug-in card: 157*128*31 mm (6.2*5.1*1.2 inch) Gross Weight external power: 0.4 kg internal power: 0.8 kg plug-in card: 1.0 kg Emission/Safety FCC Part 15 , Class A, RoHS and CE Mark Export Carton Packing
Technical Specifications Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m) singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km) Flow control Full Duplex: IEEE802.3x Half Duplex: back pressure. Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A Ambient temperature: 0 ¡« +50 Storage temperature: -20 ¡« +70 Humidity: 5% ¡« 90% Dimensions: Internal Power: 40 (high) x 110 (width) x 140 (length) mm External Power: 26 (high) x 70 (width) x 93 (length) mm.
Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX MAC addresses table: 1K Data buffer: Built-in 128Kbyte RAM . Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps Cable: UTP: Cat. 5 (the max distance up to 100m) Fiber ( Multimode): 50/125, 62.5/125m, the max distance up to 2km or 5km Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m, the max distance up to 20 -120km Flow Control Full Duplex: Supporting standard IEEE802.3x Half Duplex: back pressure LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act. Power Requirement: AC 170 ¡« 240V, DC 5V. Ambient Temperature: 0 ¡« 70 Humidity: 5 ¡« 90% Dimensions: Internal power: 30, 110, 140mm External power: 26, 70, 93mm.
ANYK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. Main features Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex; UTP port supports MDI/MDI-X auto crossover; Support link fault pass through function(LFP),with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link; Support far end fault function; Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode; Supporting 1600 bytes packet for management; Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode; Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction; Internal or External switching power: for users to choose. Technical Specifications Operating standard: IEEE802.3u, 10/100Base-TX and 100Base-FX Built in 128Kb RAM for data buffer; Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps Cable: UTP: Cat. 5 UTP (the max distance up to100m) Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125ª¦m(the max distance up to 90km) Flow control Full Duplex:IEEE802.3x Half Duplex:back pressure LED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX. Power : AC 220V(170-250V),50Hz; DC: 5V,1A Ambient temperature:0 - +50íµ Storage temperature:-20 - +70íµ Humidity:5% - 90% Dimensions: Power external: 26 (high) x 70 (width) x 94 (length) mm Power internal type: 30 (high) x 110 (width) x 140 (length) mm
10/100/1000m fiber media converters Main features Auto negotiation function allows utp ports to auto select 10/100/1000m and full duplex or half duplex. The utp port supports the connection of mdi/mdi-x auto crossover. Multimode fiber: the max distance up to 224m/ 550m Singlemode fiber: the max distance up to 100km Supporting the max 1536 byte ethernet packet Supporting flow control Adopting internal power supply Technical specifications Operating standards: ieee802.3z/ab, 1000base-t and 1000base-sx/lx Mac address table: 4k Data buffer: 256k Connector: utp: rj-45, 10/100/1000mbps; fiber: sc, 1000mbps Cable : Utp cable: cat 5e or cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125ª8m (the max distance up to 550/224m) Singlemode : 8.3/125, 8.7/125, 9/125ª8m (the max distance up to 100km) Flow control Full duplex: ieee802.3x Half duplex: back pressure. Power: ac 220v(170-260v) 50hz; dc 5v¼2a Ambient temperature¦0 ½ +50µ Storage temperature¦-20 ½ +70µ Humidity¦5% ½ 90% Dimensions ¦40 (high) x 110 (width) x 140 (length) mm
Short Description: Features In accordance with Ethernet standards IEEE802.3, 10/100/1000Base-TX to 1000Base-FX Supported Ports: LC for optical fiber; RJ45 for twisted pair Auto-adaptation rate and full/half-duplex mode supported at twisted pair port Auto MDI/MDIX supported without need of cable selection Up to 6 LEDs for status indication of optical power port and UTP port External and built-in DC power supplies provided Up to 1024 MAC addresses supported 512 kb data storage integrated, and 802.1X original MAC address authentication supported Conflicting frames detection in half-duplex and flow control in full duplex supported LFP function can selectable before order 1.Introduction 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 100 kms relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks. .Operating Environment 1) Operating Voltage AC 100-220V/ DC +5V 2) Operating Humidity Operating Temperature: 0â?? to +50â?? Storage Temperature: -20â?? to +70â?? Humidity: 5% to 90% 4.Quality Assurance MTBF > 100,000 hours; Replacement within one year and non-charge repair within three years guaranteed 5.Application Fields For intranet prepared for expansion from 100M to 1000M For integrated data network for multimedia such as image, voice and etc. For point-to-point computer data transmission For computer data transmission network in a wide range of business application For broadband campus network, cable TV and intelligent FTTB/FTTH data tape In combination with switchboard or other computer network facilitates for: chain-type, star-type and ring-type network and other computer networks 6.Remarks and Notes 1) Instructions on Media Converter Panel Instructions on Front Panel Identification for front panel of the media converter is shown below:
â?¢ 1 Port 10/100M Media Converter, Single Mode Dual Fiber â?¢ Half or full duplex auto-negotiation â?¢ 10/100 Mbps auto-negotiation for copper port â?¢ Auto MDI/MDI-X for copper port â?¢ Complies with IEEE 802.3u, IEEE 802.3X, IEEE 802.3 â?¢ Support Link Fault Pass Through function â?¢ Plug-and-play installation â?¢ Extend network distance up to 100 km â?¢ SC/FC/ST fiber port optional, WDM â?¢ Can be build in 2U 14 slot media converter chassis
ForTronix 10G Managed Fiber Optical Media Converter Open SFP+ Slot converts and extends a 10G connection over fiber optical cables. And it extends the network transmission distance from 100m via copper cables to 100 km via fiber optical cable. Moreover, this Fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation. At the meantime, it supports for full-duplex operation, and its Jumbo Frame support provides efficient network operation. In addition, this versatile 10G Managed Fiber Optical Media Converter Open SFP+ Slot is compatible with most 3COMâ?¢, Ciscoâ?¢, Lucentâ?¢ and Nortelâ?¢ networks and fully complies with applicable IEEE 802.3 standards. Furthermore, its design widely applied to home, office and private sectors applications.
The ForTronix (https://www.fortronix.com.cn) 1000 Mbps Mini Gigabit Fiber Media Converter Open SFP Slot converts a Gigabit connection over fiber optical cables. And it can interconvert electrical signals of 100Base-T and 1000Base-TX twisted pairs with optical signals of 1000Base-FX. Besides, it extends the network transmission distance from 100m via copper cables to 100 km via fiber optical cable. Moreover, this Fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation. At the meantime, it supports for full-duplex operation, and its Jumbo Frame support provides efficient network operation. In addition, this versatile 1000 Mbps Mini Gigabit Fiber Media Converter Open SFP Slot is compatible with most 3COMâ?¢, Ciscoâ?¢, and Nortelâ?¢ networks and fully complies with applicable IEEE 802.3 standards. Furthermore, its mini design widely applied to home, office and private sectors applications.
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply Features Supports auto MDI/MDIX crossover 1K MAC address can be storage, and automatic updated Supports 10/100M, full/half duplex auto- negotiation Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard More than 50,000 hours MTBF Supports over-sized packets up to 1600Bytes Full duplex-flow control, Half duplex-back pressure Link fault pass through function Full-positioned LEDs to indicate power and network status Same card on rack mounted and desktop FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark Throughput @ 100Base: 148,800 pps (64-byte packets) Multimode or Singlemode; single fiber or dual fiber optional Transmission distance is from 2KM up to 120KM Network broadcast storm protection function High quality optical modules and chips with working stability Specification Standard IEEE802.3 (10BASE-T) IEEE802.3u 100BASE-TX/FX (Fast-Ethernet) IEEE802.3x (Flow Control) IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree Fiber Connector SC standard, ST/FC/LCoptional 10/100BASE-T STP or UTP Category 5/5e/6 cable (Max. 100m) 100BASE-FX 50/125um, 62.5/125um multimode fiber cable (2Km) 9/125um singlemode fiber cable (20/40/60/80/100/120Km) Conversion Mode / Delay Time Store-and-Forward < 10us, straight-through