Stainless steel nois isolated closed (open) top washing cabin 4 or 6 units of balanced brush rollers in the washing unit revolving at high speed Adjustable glass transport speed High sensetive brushes that can wash coated glass Homogeneous brush contact fof different glass thicknesses Draying fan equipped with a heater placed in a noise-isolated housing Stainless steel water tank equipped with a heater Float-valve system for controlling the water level in the water tank Standard working direction from left to right Electrical system compliant with general safety rules.
Glass-lined and stainless steel reactor with the capacity 50-30000l. Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180. Resistance to impact: 220-10-3j. Thermal shock resistance: resistance to sudden cooling 110, resistance to sudden heating 120. Insulation performance: the enamel surface should be strictly tested at 20kv.
Features: Frequency:50HZ-60HZ Rated Current:60A Installation Wattage:40KW. Weight:2800KG Dimension:4200mm(L)*2200mm(W)*2250mm(H).
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high. Technical data: Distance between drilling head and supporting column:1345mm Hole diameter:í=4mm-200mm Glass process thickness:3mm-19mm Power:4kw Dimention:2500*2200*1600mm
Functions and characteristics: This line is specially designed for producing the slot-alum insulating glass .It includes vertical washing drying machine roll-pressing machine and can accomplish the double glazingí»s washing drying auto-assembling, auto-roll-pressing and smooth shifting out. It features high efficiency, low power, and energy-saving, less space using and easy operation. Technique parameter: Max .Glass size 1600íß1800mm Min .Glass size 300íß500mm Thickness of washing glass up to 50mm Working speed 2-10m/min Power voltage 380vac Size of line 11500íß1250íß2600mm Power rate 11kw Size of line 11500íß1250íß2600mm
We provide two series of laminated machine. Lm-af-t is a tilting design and lm-af-c a chamber design. Lm-af series Characteristic 1. Laminated glass is made in this machine. No autoclave or roller press is required. The laminated glass made from this machine is finished product. 2. Vacuum rubber ring and vacuum rubber bag are not required. For details, please refer to the technical description of each model. Type of glass to be made This machine is used to make different type of laminated glass such as, 1. Laminated glass for decorative and architectural purposes. 2. Polymer dispersed liquid crystal (pdlc) panel which is transparent allowing light passing through when voltage applied and opaque when voltage shut off. Eva interlayer film The laminated glass made out of this machine requires no pvb. Instead, a special interlayer film eva is used to bind the glass. Not like pvb, eva film is easy to be handled such that it requires no control in temperature and humidity. Hence, no assembly room is needed and thus, air-conditioner and de-humidifier are not required. The laminated glass can be made from one piece of eva film such that excellent anti-penetration strength is obtained without any glass fragmentation in case the laminated glass is broken accidentally. Pallet or plywood case
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing Wooden case or Plywood case
Lass max.Loading area :3660x2440mm Glass min. Dimention :300x200mm Glass thickness:í²4í¬19mm Container 40fc
Round glass edge bevelling Frb xl royal bevelling and grinding machines are designed for your supreme comfort and safety for round and irregular shaped glass cuts. The bevelling and grinding of the round glass and mirrors automatically achieved with a tolerance of +-0.1 as to the requested measures. Copying thru the glass shape itself semi-automatically does the bevelling and grinding of the oval glass and mirrors. The oval glass and mirrors smaller than 550 mm diameter are bevelled and grinded by the use of the additional plate attached. The rotational speed of the plates electronically adjusted either from diamond attachment hear or control panel. The meters at the diamond head makes the operation comfortable. Features: Glass thickness : 3 to 30 mm Grinding : 150 - 2200 mm Bevelling : 150 - 2400 mm Operating types : manual but automatic at oval and circular glass Diamond wheel diameter (grinding) : 100 - 150 mm Diamond wheel diameter (bevelling) : 150 mm Head inclination : 0 - 15 Diamond wheel stroke : 50 mm Bevelling width : 5 - 60 mm Bevelling types : vertical and various edges Technical specifications: Type : frb xl royal Operating area : 3500 x 3500 mm Engine power : 4.15 kw Engine rpm : approx. Bevelling 2500 rpm, grinding 5000 rpm Weight : 670 kgs. In wooden case
the bosmak CNC glass machine model kcs 2012 is popular used for the mirror glass product the max size for glass is 2000x1200mm , the thickness is 3-19mm , it could be drilling ,grinding and polishing , which the edge could be 2.5 d edge ,straight with arrissed , round edge with radius ,ogee edge etc , any interested in ,please contact us .
Glass-lined reactors are used worldwide, in very severe environments in chemical industries as well as for the glass layer sanitary properties in pharmaceutical industries. The requirements for glass-lined reactors are reliability, safety, flexibility, efficiency, cost effective operation and availability for industrial processes.
1- Speed: 140m/min 2- Thickness: 4-12mm 3- Min size: 750 350 mm 4- Max size: 3700x2500mm 5- Chamfer width: 0.5 mm 6- Motors groups: 3 pairs (6 chamfer 7- Power: 15KW, 380V/50Hz 8- Air pressure: 0.6-0.8MPa 9- Size: 7600 4800 2100m Linear  guide: Taiwan silver Motor driver: Schneider Servo driver: Schneider PLC: Schneider Intermediate relay: Schneider
1. Processing speed: 0.7~3.5m/min 2. Glass processing thickness: 3~12mm 3. Total power: 24kw 4. Min. processing size of glass: 80 x 80mm 5. Occupation area: (L x W x H) 6800 x 1200 x 2500 6. Gross weight: 4000.00 kgs 7. Max. size of bevel edge: 40mm 8. Beve angle: 0-25 9. WIth PLC touch screen 10. HS CODE: HS CODE: 8464201000
1- Processing speed: 1~5m/min 2- Min. processing size of glass: 60 x 60mm 3- Glass processing thickness: 3~25mm 4- Max. size of hemline grinding: 4mm 5- Processing degree: 0-45 degree 6- Total power: 20kw 7- Weight: 2800.00 kgs 8- Occupation area: (L x W x H) 6800 x 1200 x 2450 mm
Vertical glass washing machine information: Max glass processing width:2500mm/2200mm. Min glass processing size:450*450mm. Glass thickness:3-19mm. Working speed:1-7m/min. Power:380V/50HZ. Features: 1.Vertical glass washing machine is key equipment of manufacturing and processing insulating glass in architecture,building material and decoration.The machine can wash 3-12mm thickness flat glass. 2.The machine mainly consists of Washing Section,Drying Section,Drive System,Machine Frame,Tank,Blower,Electric Control System and other parts.During the whole process,the machine works automatically,and no need manual operation. 3.Washing and drying part can open for easy maintenance,max,opening 200mm. 4.Conveyor rollers are vulcanized and rectified,bbeing made with NBR(nitrile-butadiene rubber).Roller diameter is 80mm. 5.170mm flocking bristles brushes.Last soft brush is for Low-E and coat glass.Brush axes are in stainless stell.Water tanks are built with wheels for easy removal and cleaning and equipped with "fast plugs"so they can be easily drained without any disassembly.
Horizon glass washng machine information: Unit weight:1000kg. Glass thickness:2-19mm. Min glass size:250*250mm. Max processing glass with:1600mm. Max height:400mm. Features: Glass washing machine adopts horizontal structure for cleaning and drying on flat glass,with standard series,coated film series and LOW-E.Procedures:Loading seaction-cleaning seation(three grades washing)-Drying section(18KW air dryer)-off-loading section.it's a necessary machine on glass deep processing.
Glass lined reactor by the high silicon content of glass lined glaze, through a special process make the glass lined glaze firm adherence to the metallic iron tire surface, smooth and clean the lining layer is formed, can give full play to the advantages of two kinds of materials (metal and enamel), has the advantages of the glass stability and the metal strength, is an excellent corrosion resistance equipment. Electric heating reactor without boiler, automatic heating, clean and sanitary, no environmental pollution, flexible operation, production efficiency high. Glass lined reactor is widely used in chemical, petrochemical, pharmaceutical, food, pesticides, dyes and other industries. Technical features: Item 50-50000L Allowable working pressure: (1) Reactor inside:
Skw-2500v is our standard size of vertical washing machine, it can be matched with glass insulating line. It combined function of three steps washing, used with stepless regulator driving system, which is easy to wash different size of glass. Washing area installed with stainless steel or other special treatment steel. Optional for hard and soft brusher device, which is special designed for hard low-e glass washing. Our machine can be design according to customer requirement. Sanken sincerely wishes to offer you the best quality vertical glass washing machine with the best economical price. And you are most welcome to china for visiting our factory 2)-specification of vertical glass washing machin 1. Processing glass thickness: 3-19mm 2. Min. Size of processing glass: 650x650mm 3. Max. Height of processing glass: 2500mm z 4. Power: 28kw 5. Weight: 2.5 tons 6. Occupation area: 8000x3000x3700mm
S&K Glass Engraving Machine is an engraving equipment using in the plane of glass. This type of engraving machine is composed of graphical input, data processing and automatic processing. 1- Graphical input section: In order to control the processing machinery works automatically, the graphics which is going to engrave, will be changing it into a digital graphics file which can be identified by an engraving software processing. 2- Data processing section: After getting the digital graphics file from the engraving software, then use computer to process it by an electrical signal which can control the mechanical movement. 3- Processing automation section: Imply the instructions from the computer to complete the graphic engraving process. During the whole process of this kind of machine, the operator is just responsible for processing data input, the upper and lower parts and monitoring process. Other work will be done by the equipment automatically.
Technique parameter Voltage:380v electric power:26.75kw Work speed:2~7m/min Max size of glass processing:2000*2450mm Min size of glass processing:420*500mm Rinsing thickness:3~12mm Insulating glass thickness:¡Ü40mm Contour dimension:6800*3200*2150 1.Sx2500 glass washing machine is a special multifunctional washing machine for flat glass cleaning .It has favorable washing and air-dry effect.This is an ideal choice for the glass processing corporation. 2.Three stage toll type washing brushes, water circulation, heat air and etc.Multifunctional combinations are available for customers. 3.Feeding system adopts gear transmission which is more stable and reliable;cleaning system adopts electrical adjustment which is displayed by digital and easy operated 4.This machine is featured in reliable function, good washing effect and easy maintenance.It is not only suitable for general glass washing but also for the high requirement toughened glass washing and dryness. Min.Order quantity:1set/sets Supply ability:20set/sets per month Port:qingdao tianjin ningbo shanghai Payment terms:l/c, d/a, d/p, t/t, western union, moneygram Packaging details:wooden case or as customer require Delivery details:25 days after the payment
