Paint Brushes
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Silicone Emulsion 60% is used in industrial applications such as in Rubber and plastics as release agents and lubricants, in Food trays and plastic serving dishes as release agents, in Car polishes and household cleaners to improve protection, resistance, gloss and spread ability and in Textile finishing to enhance feel, water repellency and reduce the need for ironing. Silicone Emulsion 60% is also used in Perlite, vermiculite and clay and other building materials to improve water repellency and protect against dampness. Itâ??s used in Printing and papermaking for lubrication and as an antistatic agent. Silicone Emulsion 60% used as a Release agent for industrial rubber tire plastics and casting materials; Rotary offset printing lubricant; Industrial waterproofing agent and release agent; Additives for maintenance products; Polishing agent for floors and furniture; And Leather maintenance products, etc. Silicone Emulsion 60% WC Code: 24-005-04 Sales Specification Appearance: White Liquid Odour: Characterictic Solid content (%): 60.00 �± 2.0 pH Value: 8.0 �± 1.0 Density (g/cm3): 0.953 �± 0.02 Soluble in water: Miscible Packing 440.92 LB Drum 2204.60 LB IBC Tote
Water Based Acrylic Resin Emulsions for Printing Inks & Varnishes We supply ecoprint range of water based acrylic resin for high gloss water based printing Inks and Varnishes. Our ecoprint range of acrylic resins are REACH / ROHS compliant, Formaldehyde free, APEO free, PVC free, Phthalate free and Azo dyes free.
Textile Emulsions We have a broad range of coating products for the TEXTILE INDUSTRY such as Textile finishing agents Strech khadi for hosiery textile printing Ready khadi for textile printing Excellent quality binders for textile printing High quality plastisols
Paints. Its all paced in 1/4/20/200 ltrs drum packing.
Thinner
Primer
Lubricants, greases, base oil sn80, sn150, sn500.
Neo Speciality Paints are specially designed products made for meeting very critical requirements. The products that include in this category are Heat Resisting Paints, Anti Graffiti Paints , Reflective Paints etc. Heat resisting Paints are speciality aluminium Paints that are capable of withstanding high temperature ranging from 200 deg C to 600 deg C . Anti Graffiti Paints are Top Coats over Epoxy Paint/PU Paints for achieving Excellent gloss, Scratch Resistance. They offer easy dust & stain removable properties from substrates with simple water washing. Reflective Paints are transparent coating that increase the visibility of the substrate upon light incidence thereby adding aesthetic look to the substrate.
NEO STOVE are premium stoving Enamel Paints are based on thermosetting resins and that cure on application of heat @ at 120 deg c for 30 minutes stoving schedule. Available in different shades as per shade card , NEO STOVE have good flexibility and adhesion ,fair gloss and chemical resistance.
NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing fetaures are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance
Water Based Coatings - Primers, Gloss & High Scuff - High Gloss/High Slip - Duct Gloss & Matt - Specialty Coatings - Soft Feel / Satin / Neutral / Super Matt
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) waste food solutions aluminum used beverage cans (ubc) / aluminum ingots.Logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Quick Details CAS No.: N/A Other Names: Paint Aerosol MF: N/A EINECS No.: N/A Place of Origin: Guangdong, China Main Raw Material: Epoxy Usage: Appliance Paint, Boat Paint, Building Coating, Car Paint, Furniture Paint, Paper Coating, Plastic Coating, Road Marking Paint, Rubber Coating Application Method: Spray State: Liquid Coating Brand Name: TOPONE Model Number: S7SP400ML-68 Product Name: Spray Paint Colors: Primer Gray Capacity: 400ml Feature: Eco-friendly Function: Decorative/Mark/Graffiti Use: Multi-usage Shelf Life: 3 Years Certificate: MSDS OEM: Available
Almonds nuts, cashew nuts, pistachios nuts, nuts & dried fruits, rice & grains, pulses, chickpeas, green lentils, red lentils, red kidney beans, sugar, energy drinks, baby food, fmcg products, a4 copy paper, toiletries, oils and fats, refined sunflower oil, frozen chicken, frozen pork, food chemicals, beverages, aluminum foil, baking papers and nylons, trash can bags and liners, organic chemicals, water chemicals, agricultural chemicals, confectioneries, cosmetics, cleaners and disinfectants, lubricants, fresheners and purifiers, pet foods, pure chemicals, solvents, acids, inorganic chemicals, dry fish, milk products, avocado, frozen fish, frozen vegetable, dairy products, condiments and dippings, cereals and oatmeals, medical kits, seafood, motor oil, baby milk powder, laundry & detergents, bathroom & toilet cleaners.Trade.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Ritver Aluminium Paint
Neo has extensive range of primers based on Epoxy / PU / Synthetic Resins. NEO PRIME GUARD grades are quality Epoxy based primers while NEO SHIELD PRIME grades are PU primers. These are used as a primer. They exhibit excellent adhesion properties and will stick to bare metal, Paints, primers, and fillers. They are used as a anti corrosive / protective primers. Neo offers multiple grades loaded with special additives, pigments for meeting specific requirements.
