The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter0.1-1.0mm and bare fiber length 16mm more or less. Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Support English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.
JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. According to clients needs.
Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.
Covered welding electrode Brand : weldon e-6013 All position/general purpose Classifications Is 814 er 4211 Aws : e-6013 Characteristics Weldon e 6013 is a medium coated rutile type all position general purpose mid steel electrode. It gives a quite and stable arc, steady fusion rate, least spatter and smooth weld bead with radiographic quality. Easy removal of slag and excellent weld quality facilitate multi pass welding Applications * suitable for all types of welding structural steel works like column, trusses, grills, bus & truck body building and plant equipments.Suitable for welding ship hult, tanks and vessels, steel frames, steel furniture, steel structurals, etc. * it is recommended in applicants such as , bogies under frames of railway carriages, wagons, boilers, pressure vessels, general engineering constructions, pipe welding, ship building, truck, bus frames and bodies etc. * suitable for all types of mild steel structurals, plant machinery pipes, dredgers & trailerÆs etc. Chemical composition of all weld metal Element c mn si s p % (max) 0.04-0.12 0.40-0.620 0.15-0.40 0.03(max) 0.03(max) Mechanical properties of all weld metal Uts (n/mm2) ys (n/mm2) elongation l=5d % cvn impact at 0¦c 420-540 350 min 22(min) 50(min) Note: single values shown above are maximum Welding current and packing data : dc¦ / ac 50 v Dia (mm) 2.5 x 350 3.15 x 350 4 x 450 Current (a) 60-90 100-140 140-190 Dia (mm) 135 90 60 Dia (mm) 8 8 8
BJ Fangda is supplying the products with 4 series, 38 types and 126 specifications. Main produces are as followed: I. UHP, HP and RP Graphite electrodes. II. Micro-pore and partial graphite carbon blocks III. Isostatic Graphite products IV. Special graphite, carbon felt, carbon/carbon composite materials. The products are widely used in fields of Metallurgy, Chemistry Industry, Non-ferrous, Aviation, Medical treatment etc. And our products are sold well in domestic and overseas markets with good reputation. Annual capacity for main products -Graphite electrodes is 150, 000mt, 60% for exports and 40% for main steel plants in China, like Bao-steel, Anshan and Benxi Steel, and Wuhan Steel. BJ Fangda adhere "Sincerity and Mutual benefit" based in the strong manufacturing facilities, develop the National Industry and forge the first brand "Fangda Carbon" in China Carbon Industry packed in wooden pallet
Techwin Fusion Splicer for maintenance of optic fiber www dot techwin-china dot com We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: � The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. � Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. � Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: � Not only a Fusion Splicer, but also your partner who make your job easy and happy � 5.0 inch TFT color LCD monitor with anti-reflective coating � The advanced core to core fiber profile alignment system(PAS) � ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary � X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times � 8 seconds splicing time, 30 seconds Heat-Shrinking � Battery capacity was display in real time, precisely
Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved end face fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interface Paper carton, weight is 12kg
Core to core alignment by pas technology (pas:profile alignment system) Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of cleaved end face 5.7 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interface Paper carton, weight is 12kg
Features Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interface Specifications Model Kl-300t Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µm) 16mm(coating diameter: 250 ~ 1000µm) Fiber diameterCladding diameter:80 ~150µm coating diameter:100~ 1000¦ìm Fiber countSingle Fiber aligning methodCore or clad aligning Image processing methodDigital Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing timeTypical 9 sec, with standard sm fiber Splicing mode53(templet), 40(user) Splice loss estimateMore accurate Return loss>60db Storage of splice result4000 results, 20 parameter per result Fiber display and magnification300x(x or y view), 150x(x and y view) Tube heating timeTypical 30 sec Tube heating mode9(templet), 24(user) Tube heating temperatureCan be adjusted Applicable protection sleeve length60mm, 40mm and a series of micro sleeves Tension test2n Electrode life2500 No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery Display screen5.6 tft inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsUsb 1.1 and vga Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10¡«50¡æ, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x150mm (h) Weight2.7 kg excluding battery, 3.2 kg including battery.
Features High-resolution true color 5.7 inch LCD display The advanced core to core fiber profile alignment system(PAS) Real time calibrating system, parameter needn't be adjusted X/Y axes were displayed meanwhile, Magnification up to 304 times 8 seconds splicing time, 30 seconds Heat-Shrinking Battery capacity was display in real time, precisely Built-in high capacity battery, support 220 times splicing and heating, to meet one days'work Long Electrode Lifetime, up to 4000 times The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s Three Splicing modes: auto, half-auto, manual Built-in super high-brightness LED supply convenience for night work Auto calculate splicing loss Small bulk and light weight, only 2.8kg include battery 4000 results Storage USB data interface &VGA One button operation to finish results download or software update Close shield splice automatically, Close heater lid heat automatically One year Warranty Specifications Model M-50 Fiber Types SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655) Average Splicing Loss 0.02dB with G.652, 0.01dB with G.651, 0.04dB with G.653 and G.655 Splicing & Heating Time Typical splicing time:8s Typical heating time:30s Return Loss 60dB or greater Fiber Coating 100 m to 1000 m Fiber Cladding 80 m to 150m Fiber Cleave Length 8-16mm(coating diameterGeneral Specifications Power Supply Alternating Current:100-240 50Hz/60Hz 30W, Direct current:13.5V/4.5A Built in 11.1V Li-ion battery charger and AC adaptor Battery Life Support 220 times splicing and heating on one charge(3.5hours) at least Battery Lifetime Cycle life up to 300-500 times, replaceable Tension Test 2N Electrode Lifetime >4000 times, replaceable Operating Temperature -25 -50 Storage Temperature -40 -80 sing) Work Altitude 0~5000 meters Instrument Weight 2.3kg(no battery ), 2.8kg(including battery) Dimensions(L x W x H) 160mm¡Á150mm 140mm Package G.W/N.W 8.0/7.0kg Package (L x W x H) 500mm 350mm 400mm.
Features Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of , cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Specifications ModelKl-280 Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µ,m) 16mm(coating diameter: 250 ~ 1000µ,m) Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm Fiber countSingle Fiber aligning method Core , aligning Return loss>60db Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing modeAuto Splicing mode12(templet), 188(user) Typical splicing timeTypical 9 sec, with standard sm fiber Protection sleeve length60mm, 40mm and a series of micro sleeves Storage of splice result5000 results, 3 parameter per result Tension test2n Fiber display and magnification400x(x or y view), 200x(x and y view) Tube heating timeTypical 30 sec Electrode life2500 No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery Display screen5 inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsRs 232 Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x160mm (h) Weight3.52 kg including battery.
Features Color LCD monitor & 256 magnification Compact & light weight Reversible monitor with control panel on each side Max. Wind velocity of 15m/s. 8 sec. Splice time, 40 sec. Tube-heat time Simultaneous x and y views Large capacity internal battery System test ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8000 groups of splice results Multiple language options Specifications ModelDvp-730 Applicable fibersSm, mm, ds, nz-ds, edf Cladding diameter100 to 150um Coating diameter100 to 1000um Fiber cleaved length8-22mm (standard) Splicing modeAuto & manual Average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Return loss 60db Environment conditions-25-+50(operation temperature), 0-95%rh(humidity), 0-5000m (altitude) Storage environment-40-+80(temperature), 0-95rh (humidity) Protection sleeve length20mm, 40mm, 60mm Tension test2.0n (standard) LanguageEnglish, chinese, korea, russian, spanish etc. InterfaceRs232 interface & video output Power supplyAc adaptor: 85-260v input voltage Internal battery: 12v voltage, 10ah, up to 200 times of continuous splices and heatsdc adaptor: 12v voltage, optional multipurpose external battery Dimensions170(w)140(h)170(d)mm Weight3.3kg.
Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm (Coating diameter: 250¦Ìm) Fiber diameter Cladding diameter: 80-150¦Ìm Coating diameter: 100-1000¦Ìm Fiber Count Single Splicing mode Auto Calibrate Normal Special Fiber aligning method Core aligning¡¢clad aligning¡¢manual aligning Image processing method Digital Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Typical splicing time 9 sec (standard SM fiber) Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss £¾60dB Storage of splice result 4000 results, 20 parameter per result Fiber magnification 300X (X or Y view) 150X (X and Y view) Tube typical heating time 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Adjustable Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2N Electrode life 2500 No. of splice/heating with battery Typical 160 cycles (splice/tube heat with inner Li-battery) Display screen 5.6 inch TFT color LCD monitor Image change over The fiber image can be turned upside down Terminal USB 1.1 and VGA Operating condition 0-5000m above sea level,0-95%RH and -10-50¡ãrespectively, Max wind velocity of 15m/s Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Dimension 150mm(L)¡Á150mm(W)¡Á150mm(H) Weight 2.7Kg excluding battery, 3.2Kg including battery. Plastic bag outside,strong foams inside.
Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm Fiber diameter Cladding diameter: 80-150¦Ìm;Coating diameter:100-1000¦Ìm Fiber Count Single Fiber aligning method Core aligning Return loss £¾60dB Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Splicing mode Auto Typical splicing time 9 sec, with standard SM fiber Splicing mode 12 (templet), 188(user) Tube typical heating time 30 sec Protection sleeve length 60mm, 40mm Storage of splice result 5000 results, 3 parameter per result Tension test 2N Fiber magnification 400X (X or Y view), 200X (X and Y view) Electrode life 2500 No. of splice/heating with battery Typical 130 cycles Image change over The fiber image can be turned over Display screen 5 inch color LCD monitor Terminal RS232 Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating condition 0-5000m above sea level, -10-50¡ã Max wind velocity of 15m/s Dimension 150mm(L)¡,150mm(W)¡,160mm(H) Weight 3.52Kg including battery. Plastic box outside,strong foam inside.
Applicable fibers SM MM DS NZDS Fiber cleaved length 8-16mm Fiber diameter Cladding diameter: 80-150¦Ìm;Coating diameter:100-1000¦Ìm Fiber Count Single Fiber aligning method Core aligning Return loss £¾60dB Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Splicing mode Auto Typical splicing time 9 sec, with standard SM fiber Splicing mode 12 (templet), 188(user) Tube typical heating time 30 sec Protection sleeve length 60mm, 40mm Storage of splice result 5000 results, 3 parameter per result Tension test 2N Fiber magnification 400X (X or Y view), 200X (X and Y view) Electrode life 2500 No. of splice/heating with battery Typical 130 cycles Image change over The fiber image can be turned over Display screen 5 inch color LCD monitor Terminal RS232 Power supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating condition 0-5000m above sea level, -10-50¡ã Max wind velocity of 15m/s Dimension 150mm(L)¡Á150mm(W)¡Á160mm(H) Weight 3.52Kg including battery. Plastic bag outside,strong foams inside.
RoHS Compliant Fiber Requirement Silica Glass Coating Diameter Coating Diameter 100 to 1000 ¦Ìm Cladding Diameter Cladding Diameter 80 to 150 ¦Ìm Cleave Length 8 to 16 mm (under 250 ¦Ìm coated fiber) 16mm (except for 250¦Ìm coated fiber) Typical Splice Loss,Identical Fibers SMF: 0.02dB MMF: 0.01dB DSF: 0.04dB NZ-DSF: 0.04dB Number of Fiber Profiles 48 Customizable Typical Splice Time Approx. 9 Seconds (Quick mode) Heaters Dual Independent type.Each Heater: Approx. 35 seconds Number of Pre-Installed Heater Profile 20 Customizable Internal Splice Data Storage and pictures 10,000 Arc Test Automatically Compensates for Environmental Conditions Proof Test Internal 200g (Std.) Loss Estimation Process High-resolution Direct Core Monitoring (HDCM) Interface USB Port for PC Interface RCA Jack for External Monitor DC input for Car Battery Operation Menu Selection User Friendly Menus Image Display Dual or Single Fiber Imaging X/Y 5.6 Inch TFT Anti-Glare High Resolution Color Monitor Size 150W x 150D x 150H mm Weight 2.8 kg (with PS-66) Power Requirement Input: 100 to 240V AC;50/60Hz, 12V DC Battery Operation BU-66S: 100 Splices & Heater Cycles BU-66L: 200 Splices & Heater Cycles. Plastic bag outside, strong foams inside.
Dongfang Yoyik perennial supply spare parts of steam turbine, turbine generator, EH oil system filter, fluorine rubber O-ring, EHC system various types of pumps, valves, power plant automatic control components, water turbine generator, all kinds of bearings, electrical insulation materials, and other power plant spare parts accessories. The quality is quite worthy of buying. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-Boiler electrode rod DJY2212-115-DF Indicator light XB4BVM1thermocouple digital WRN-332NM Platinum Wire WRNK2-331\�?6\K Thermocouple Assemblies TC03A2-KY-2B/SPG Thermocouple Temperature Measurement TE-106 centrifugal pump working DFBII100-80-230 O-ring mechanical seal pdf BGM37G/50R-G9 mechanical seals 021-M43K/125-00 centrifugal pumps SDH200-150-315 EH oil supply device screw pump stainless HSNH440-46 k type thermocouple 1200 degree TE-305 thermocouple probe TC03A2-KY-2B/S20 hydraulic pressure pump 125LY-35-6 thermocouple types WREX-001 Tachometer Sensor DF6101 axial piston pumps PV2R3-76-RBAF1 rtd thermocouple W08R0024A thermowell flange TC03A2-KY-2B/S19 GASKET, SPIRAL WOUND ID : 920 MM, OD : 955 MM, PRESS : 6 MPA,T : 4.5 MM, TEMP : 600 ? CBo m?ch truy?n th?ng PLC-745B VOLTAGE TRANSFORMER JDZX-20reciprocating piston pump PVH74QIC-RSM-1S-1X-C25-31 thermocouple cable WRNR2-12 rotary vacuum pump P-1825 unloading valve shaft seal mechanical 8b1d vane type pump F3-V10-1S6S-1G-20 Lubricating oil filter element QF1600KM25108S thermocouple k W08Q0021A thermocouple type k TE-305 Signal Processing Board 3L4488 axial piston pumps MCY14-1B fuel pump 50SDZLJ-40AX1.2 pumps centrifugal DFB80-50-240 Pilot Valves 01-312E-06-HP F011067 type k thermocouple WRNK-321 Relay MM2XPelectric hydraulic pump 40AY35X11 gear oil transfer pump 3Gr70�?2 centrifugal pump vertical DFB125-80-250-05 rtd thermocouple TE-305 Bladder 10 Liter, 200 Bar type k thermocouple TC03A2-KY-2B/S19 manual vacuum pump P-1764-1 temperature thermocouple TE-404 thermocoupl 1000â?? TE-305 pumps centrifugal KSB65-250B oil transfer pump 3G70*2-46W heater thermocouple TKWRE2-230T �?6 BLADDER NXQ-A-10/20 LEH k-type thermocouple WRNN2-4325 centrifugal pump KSB65-250A three screw pump ACF080K5IVBPvickers vane pump F3V10IS6SIC20 thermocouple pt100 WRN-332NM vane pumps F3-20V5A-1C22R temperature thermocouple TC03A2-KY-2B/S20 thermocouple digital WRN2-239 0-600â?? Connector 4-Pin P28J2AType K Thermocouple Cartridge WRNK2-231 vaccum pump 125LY-40-B Screw pump 3GR30X4W2 radial piston pump PVH74ROIA-RSM-IS-10-C25-3 mechanical seal CM104-45 Boiler electrode rod DJY2212-115 DFYL-2022-3-15-ZYR
ORIENTEK T40 PAS Optical Fiber FUSION SPLICER Advanced core to core Fiber Profile Alignment System - Equal to Sumitomo Type-71c fusion splicer * High Precision and Low Splicing Loss * * Real Core Alignment * * Low Splicing Loss
YCC is one of the leading manufacturer in China, annual productivity of graphite electrode is 65000 tons. YCC produces UHP, HP and RP graphite electrodes with the diameter 300 mm to 700mm. Are approved by users from more than 40 countries like Australia, Serbia, Italy, France, UK, Czech Republic, Slovenia, Poland, Romania, Turkey, Belarus, Russia, Brazil, Argentina, Ecuador etc.
YCC is one of the leading manufacturer in China, annual productivity of graphite electrode is 65000 tons. YCC produces UHP, HP and RP graphite electrodes with the diameter 300 mm to 700mm. Are approved by users from more than 40 countries like Australia, Serbia, Italy, France, UK, Czech Republic, Slovenia, Poland, Romania, Turkey, Belarus, Russia, Brazil, Argentina, Ecuador etc.
