Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
With the product name "SOFTOMNI 2000" is a proprietary formulated alkaline sizing agent. ALKYL KETENE DIMER (AKD) emulsion, designed to size the paper in the neutral to alkaline ph range of 6.5 to 8.5 SOFTOMNI is a free flowing white emulsion stable to size any type of furnishes preferably containing calcium carbonate. Different type of furnishes require different application method and dosages. SOFTOMNI 2000 is added as such (can be diluted with water to the maximum extent of 1:3 ratio) in the thick stock by diaphragm type of dosing pump. Addition of SOFTOMNI 2000 before filler is preferable to get best sizing effect. The efficiency of ALKYL KETENE DIMER depends on the retention and drainage aid program. The higher the drainage, first pass retention and first pass ash retention, optimum is the efficiency of AKD. A cationic scavenger in necessary where there is high levels of anionic trash in the furnish like deinked pulp.
BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper. It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system. It Should be applied prior to either alum or cationic auxiliaries. Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on: - Type of furnish - Base pulp pH and brightness - Desired brightness and whiteness gain
We are professional producers on series of phenalkamine epoxy curing agents and diluents. All products are based on Cardanol.
A curing agent is a standard reactive polyamide intended for use in curing of epoxy resin .It is cut to 60 % solids by weight in xylene. When cured with high molecule weight of epoxy resin .it is provides cured films with such high orders desired at actual application field as good flexibility, simultaneously with good water resistance and good alkali resistance. Thus desired for heavy duty primer coatings application of anti corrosion resistance.
Flooring- a low viscosity, modified -aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
Product Introduction: Polyamide, commonly known as nylon, is a general term for polymers containing amide groups in the repeating units of the main chain of macromolecules. Polyamide can be obtained by ring opening polymerization of internal acid amines, or by condensation polymerization of diamines and dicarboxylic acids. Polyamide (PA) refers to a polymer with a polar amide group (- CO-NH-1) in its main chain segment. Product features: 1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness. 2. Good self lubrication and friction resistance. Nylon has good self lubrication and low friction coefficient, making it a long service life as a transmission component. 3. Excellent heat resistance. High crystalline nylon such as nylon 46 has a high thermal deformation temperature and can be used for a long time at 150. After being reinforced with glass fiber, the thermal deformation temperature of PA66 reaches above 250 4. Excellent electrical insulation performance. Nylon has a high volume resistance and high breakdown voltage resistance, making it an excellent electrical and electrical insulation material. 5. Excellent weather resistance. 6. Water absorption. Nylon has a high water absorption capacity, with saturated water reaching over 3%. To a certain extent, it affects the dimensional stability of the workpiece. Product Usage: Used as a room temperature curing agent for epoxy resin. Used as a curing agent and toughening agent for epoxy resin, and as a cable sealing material. Mainly used in the production of adhesives, coatings, sealing gaskets, etc
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
CAS 85-44-9 HS code 29173980 We have type c 600kg bag,25kg bag ,500kg bag, we can also packing as your requirement. Phthalic anhydride is the organic compound with the formula C6H4 (CO)2O. It is the anhydride of phthalic acid. This colourless solid is an important industrial chemical, especially for the large-scale production of plasticizers for plastics. Phthalic anhydride is an important chemical intermediate in the plastics industry from which are derived numerous phthalate esters that function as plasticizers in synthetic resins. Phthalic anhydride itself is used as a monomer for synthetic resins such as glyptal, the alkyd resins, and the polyester resins. Phthalic anhydride is also used as a precursor of anthraquinone, phthalein, rhodamine, phthalocyanine, fluorescein, and xanthene dyes. Phthalic anhydride is used in the synthesis of primary amines, the agricultural fungicide phaltan, and thalidomide. Other reactions with phthalic anhydride yield phenolphthalein, benzoic acid, phthalylsulfathiazole (an intestinal antimicrobial agent), and orthophthalic acid. Phthalic anhydride is used in the manufacture of unsaturated polyesters and as a curing agent for epoxy resins. When used as a pigment, it can be responsible for sensitization in ceramic workers.n
1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives. 2. Typical recipes Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde. 3. Application scope A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc. B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent. Free samples 4. Storage and packaging A. All emulsions/additives are water-based and there is no risk of explosion when transported. B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels. C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use. D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
Application 2-Ethylhexanol is which is used for production of ethers used as plasticizing agents in production of cable insulation and car finishing materials. Colourless, transparent liquid with characteristic odour. Ethylhexanol Mainly used as a raw material for PVC plasticizers. Used as a solvent and preservative. Octanol is mainly used in the manufacture of phthalate esters and aliphatic dibasic ester plasticizers such as dioctyl phthalate, dioctyl sebacate and dioctyl sebacate, etc. Plastic primary plasticizers and cold-resistant plasticizers, defoamers, dispersants, mineralizers, and petroleum fillers are also used in printing, dyeing, and filming.
Glycerol (also called glycerine or glycerin) is a simple polyol compound. It is a colorless, odorless, viscous liquid that is sweet-tasting and non-toxic. The glycerol backbone is found in all lipids known as triglycerides. It is widely used in the food industry as a sweetener and humectant. Glycerol has three hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature. 1. Used to make nitroglycerin, alkyd resin and epoxy resin. 2. In medicine, it is used to prepare various preparations, solvents, hygroscopic agents, antifreeze and sweeteners, and to prepare external ointments or suppositories. 3. In the coating industry, it is used to prepare various alkyd resins, polyester resins, glycidyl ethers and epoxy resins. 4. Used in the textile and printing and dyeing industries to prepare lubricants, moisture absorbents, fabric anti-shrinkage treatment agents, diffusing agents and penetrants. 5. In the food industry, it can be used as a sweetener, hygroscopic agent and solvent for tobacco agents. 6. It is widely used in papermaking, cosmetics, tanning, photography, printing, metal processing, electrical materials and rubber industries. 7. It is also used as fuel for automobiles and airplanes as well as antifreeze in oil fields. 8. Glycerin can be used as a plasticizer in the new ceramic industry.
Acetona is an important raw material for organic synthesis, which is used in the production of epoxy resin, polycarbonate, plexiglass, medicine, pesticide, etc. It is also a good solvent for coatings, adhesives, cylinder acetylene, etc. Also used as diluent, cleaning agent, extractant. It is also an important raw material for manufacturing acetic anhydrides, diaceton alcohol, chlorofor, iodoforms, epoxy resin, polyisoprene rubber, methyl methacrylates, etc. It is used as solvent in smokeless powder, celluloid, acetate fiber, spray paint and other industries. It is used as extractant in oil industry. It is used to produce organic chemical raw materials such as organic glass monomer, bisphenol A, diaceton alcohol, hexanediol, methyl isobutyl ketones, methyl isobutyl methanos, folone, isophorone, chloroforms, iodoforms, etc. It is used as an excellent solvent in coating, spinning process of acetate fiber, acetylene storage in steel cylinder and dewaxing in oil refining industry.
Glycerine, or glycerol is a simple polyol compound. It is a sweet, colorless, odorless, nontoxic and viscous liquid. It can absorb moisture from air and also can absorb hydrogen sulfide, sulfur dioxide and hydrogen cyanide. It is insoluble in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oil. Application 1 In coating industry, as raw material for manufacturing nitroglycerin, alkyd resin, epoxy resin; 2 In textile and dyeing industry, glycerol is use to produce lubricant, moisture absorbent, anti-shrinkage fabric treatment agent, dispersing agent and penetrating agent; 3 In medicine, glycerol is used to make various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, compounding topical ointment and suppository; 4 In food, it is used as sweetener and in tobacco, glycerol is used as moisture absorbent and solvents; 5 Glycerol is also widely used in paper-making, cosmetics, leather industry, photograph, printing, rubber, etc.
Glycol Ether EB is a colorless liquid that works as an excellent solvent used in wax strippers, cleaners, degreasers, inks, water based paints, coatings, varnishes, enamels, and lacquers. It is used as a solvent for coatings resins like alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. It acts as an ingredient in antimicrobial agents, adhesives, stabilizers, defoamers, drilling stabilizers, oil slick dispersants, and water- and oil-based fracturing fluids. Glycol Ether EB is an important component in household and industrial cleaners, enhancing wetting and cleaning ability. It's used in a variety of , sunscreens, cosmetics, inks, dyes and household & industrial cleaners. Sales Specification Appearance: Clear liquid Purity: 99.50 % Color (APHA): 10 Moisture: 0.10 % Acidity as acetic acid: 0.01 % Packing 407.85 lb drum each, 4 drums per pallet. 1984.14 lb tote DOT Transportation UN Number: NA1993 Proper Shipping Name: Combustible liquid, n.o.s., (2-PROPANOL, 1-BUTOXY-) Hazard class: CBL Packaging Group:III
N,N-Dimethylaniline DMA CAS 121-69-7 is an organic chemical compound, a substituted derivative of aniline. It consists of tertiary amine, featuring dimethylamino group attached to a phenyl group. It is an important precursor to dyes such ascrystal violet. N,N-Dimethylaniline is yellow to brown colored oily liquid with a fishlike odor. Less dense than water and insoluble in water. Flash point 150�°F. Toxic by ingestion, inhalation, and skin absorption. Used to make dyes and as a solvent. Specification Appearance Colorless to pale yellow oil liquid Assay â?¥99% Aniline assay â?¤0.3% N-methyl aniline â?¤ 0.5% Water and others â?¤ 0.2% Application 1) As dyes intermediate used for the manufacture of vanillin, azo dyes, triphenylmethane dyes etc. As an important intermediate for dyestuff, mainly used in the production of triphenyl methane dyestuff, also as solvent, antiseptic for metal, solidity for epoxy resin and polyester, and catalytic promoter for polyreaction of ethylene chemical compound. 2) In medical industry, it is used in the production of cephalosporin V, sulfanilamide -6-methoxamine pyrimidine, fluorine pyrimidine. 3) In perfume industry, it is used in the production of vanilla, as well as the vulcanized agent for rubber or the raw material for dynamite and some organic intermediates.
Sodium Acid Pyrophosphate Food Grade also known as SAPP or disodium pyrophosphate is mainly used in the food applications and food processing. Sodium acid pyrophosphate food grade is extensively used in food processing, as in canned seafood, cured meat and potato products, to adjust the pH, maintain color, improve the water-holding capacity and reduce purge during retorting, Additionally, SAPP is a popular leavening agent found in baking powders. It also has industrial applications such as It is used as a buffering agent in labs, as a chelating agent in antimicrobial studies, as a food acidulant, as a peptizing agent for foodstuffs, as a corrosion inhibitor, as an anti-scaling agent, and as a sequestering agent. It is used in electroplating, metal cleaning, and drilling mud. Specifications Assay, %: 93.00 % -100.50 % Identification A & B: Pass Test Arsenic, ppm: 3 ppm Max Fluoride, %: 0.005 % Max Insoluble Substances, %: 1.0 % Max Lead, ppm: 2 ppm Max PH Value (1% Solution): 3.7- 5.0 Packing 50 LB bags, 44 bags per pallet
Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications. Product Description Packaging & Delivery Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle. For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client. Delivery Detail: 20-30days Specifications Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO) IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile CAS RN: 14816-18-3 EC No.: 238-887-3 PHYSICAL CHEMISTRY Mol. Wt.: 298.3 C M. F.: C12H15N2O3PS Form: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 C) K OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C) Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation. MAMMALIAN TOXICOLOGY Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22 ECOTOXICOLOGY Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. APPLICATIONS It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
CAS 105-46-4 HS code 2915390090 Packaging: 180kg/drum, 14.4tons per 20'FCL The application of Sec-butyl acetate is as below: 1. Used as coating solvent: Sec-butyl acetate is similar to n-butyl acetate and isobutyl acetate in solubility, and can be used as a substitute for n-butyl acetate and isobutyl acetate in coating formulations. 2. Sec-butyl acetate is widely used as a solvent for nitro paint, acrylic paint, polyurethane paint, polyester paint, amino paint, epoxy paint and other paints. 3. Used as a solvent in the manufacturing process of synthetic resins 4. Used as a solvent in the hardener manufacturing process 5. As an ink solvent, it can completely replace n-butyl acetate as a volatile solvent in printing ink 6. Used as a solvent in the adhesive manufacturing process 7. Used as diluent: Sec-butyl acetate is an ideal component with low cost and low toxicity in diluents such as tenna water and banana water. 8. Used as cleaning agent: sec-butyl acetate can be used to configure washing net water, washing mold water, washing plate 9. Used in pharmaceutical industry: sec-butyl acetate can be used as an extraction agent in the production process of antibiotics, hormones and vitamins; Due to its moderate volatilization rate, it has good skin permeability, and can also be used as a drug absorption promoting component 10. Used as fine chemical: sec-butyl acetate can be used as fine chemical extraction agent, such as extraction separation of ethanol-propanol, acrylic acid and other substances; It can also be used as azeotrope in acetic acid recovery and other processes. 11. Used in the cosmetic industry, such as in the manufacture of nail polish. 12. Used in fragrance industry: sec-butyl acetate has a special fruit smell, can be used as a fragrance 13. Sec-butyl acetate can also be used in the manufacturing process of rubber, safety glass, coated paper, solar lamp tube and other products.
Zinc Stearate Typical Properties Item Standard Appearance White fine powder Loss on drying(%) 1.0 Zinc Assay(%) 10.3-11.3 Free acid(%) 1.0 Finess(325mesh) 99% Melting Point 115-125 Zinc Stearate Usage 1. Used as a softening lubricant for rubber products, a polishing agent for textiles, a stabilizer for polyvinyl chloride plastics 2. Used as a stabilizer for polyvinyl chloride plastic products, a softener for rubber products 3. Used in the formulation of the industry, curing oils and lubricants, as well as paint drying agents. It is used for the processing of PVC and rubber non-toxic products, which can effectively improve the photothermal stability of PVC and rubber products. The dosage in PVC processing is usually
