Power Source: Battery With reasonable design, our locomotives have advantages as convenient in operation, longer usage life, bigger traction tonnage and smaller energy consumption, and easier in maintenance.
CJY14 ton trolley wire locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52 2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
Xiangtan 3-Ton Trolley Locomotive for Gold Mine How to store the motor of the mining Xiangtan electric locomotive? In the realm of mining, the storage of mining Xiangtan electric locomotive motors is a crucial aspect that directly influences their performance and longevity. Here are comprehensive guidelines for the proper storage of these motors: 1. Storage Environment: Ensure the storage location is dry and well-ventilated. Maintain a temperature range between 5�°C and 35�°C. Keep the relative humidity below 65%. 2. Cleanliness is Key: Thoroughly clean the motors to prevent the accumulation of dust and debris. Guard against pests by avoiding conditions that attract snakes, rodents, and insects that may damage insulation coatings. Consider wrapping the motors in plastic and storing them in protective containers. 3. Regular Insulation Checks: Conduct periodic insulation resistance tests. If a significant decrease in insulation resistance is observed, consider undertaking a drying process. 4. Periodic Operational Tests: Perform regular operational tests to ensure the motors remain in optimal working condition. Verify that all components are functioning as intended. 5. Documentation: Maintain detailed records of storage conditions, cleaning schedules, test results, and any maintenance or repairs conducted. These practices collectively contribute to the preservation of Xiangtan electric locomotive motors during storage. It is advisable to conduct inspections semi-annually, adjusting the frequency based on environmental factors. In humid conditions, more frequent inspections, possibly monthly, may be warranted to uphold the motors' integrity and reliability. This meticulous approach ensures that when the motors are called back into action, they are primed for efficient and reliable performance. Adhesive weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 or 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical
14-ton xiangtan trolley locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52 2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
3 Ton Mining Trolley Locomotive for Underground Tunnel Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 or 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical
Product description 3t explosion-proof flameproof mining battery locomotive Features L great tractive effort L heavy duty loading capacity L smoothly climbing and moving L safe braking control system L reliable and easy operation L simple maintenance L 25-30% energy saving compared to dc driving type L less emission, eco-friendly Parameters Model no.Cty3/6, 7, 9g(b) Adhesive / total weight (t) 3 Track gauge (mm) 600, 762 or 900 Traction (kn) 2.55 Max. Traction (kn) 6.13 Speed(km/h) 4.54 Battery voltage (v) 48 Battery capacity (ah) 330 Power (kw) 3.5*1 Dimensions Length(mm) 2360 Width(mm) 914, 1076 or 1214 Height(mm) 1550 Wheelbase (mm) 650 Wheel diameter (mm) 460 Min curve radius (m) 5 Controller Resistance or igbt Braking method Mechanical brake
Coal Mine Cable has two type :Flame retardant flexible high and low voltage cable for coal mine, the range is rated class 8.7/15kv and below Rubber insulated portable retardant cable for a coal industry ground Underground coal mining and integrated platform, substations, Shearer, transportation Machines and other mining equipment for power transmission, with excellent products Retardant, impact resistance, drag grinding. Long life, explosion and two Harder soft features. It is suitable for the transmission of electric energy by various mining equipment such as ground and underground integrated mining platform, substation, coal shearer, transport plane, etc.
Model no.Cay2.5/5, 6, 7, 9g Specifications Adhesive / total weight (t)2.5 Track gauge (mm)500, 600, 762 or 900 Traction (kn)2.55 Max. Traction (kn)6.13 Speed(km/h)4.54 Max. Speed(km/h)10 Battery voltage (v)48 Battery capacity (ah)330 Power (kw)3.5*1 Dimensionslength(mm)2330 Width(mm)914, 1076 or 1214 Height(mm)1550 Coupler height(mm)320 Wheelbase (mm)650 Wheel diameter (mm)460 Min curve radius (m)5 Controllerresistance Braking methodmechanical brake
Product Description Model No. CTY5/6,7,9G (B) Adhesive / total weight (t) 5 Track gauge (mm) 600,762 or 900 Traction (KN) 7.06 Max. Traction (KN) 12.26 Speed(km/h) 7 Battery Voltage (V) 90 Battery Capacity (Ah) 385 Power (KW) 7.5kW*2 Dimensions Length(mm) 2860 Width(mm) 920,1082 or 1220 Height(mm) 1550 Wheelbase (mm) 850 Wheel diameter (mm) Φ520 Min Curve radius (m) 6 Controller Resistance or IGBT Braking method Mechanical Brake Our Service Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants.Based on our customers'request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers'plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FedEx or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality About Us: Our factory has been specialized in manufacturing locomotives and spare parts since 1980. We have advanced technology and equipment. Our technician has more than 25 year's professional working experience. Locomotives are exported throughout the world. Main market: Norway, Turkey, USA,Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.
Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion-proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) 2.5ton Track gauge (mm) 600,762 or 900 Traction (KN) 2.55 Max. Traction (KN) 6.13 Speed(km/h) 4.54 Battery Voltage (V) 48 Battery Capacity (Ah) 330 Power (KW) 3.5 1 Dimensions Length(mm) 2360 Width(mm) 914,1076 or 1214 Height(mm) 1550 Wheelbase (mm) 650 Wheel diameter (mm) 460 Min Curve radius (m) 5 Controller : Resistance or IGBT Braking method : Mechanical Brake
The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t): 14 ton Track gauge (mm): 600.762.900 Traction (KN): 26.68 Max. Traction (KN): 34.3 Speed(km/h): 12.87 Power (KW): 52*2 Dimensions Length(mm): 4800 Width(mm): 1060,1222or 1360 Height(mm): 1700 Wheelbase (mm): 1700 Wheel diameter (mm): 760 Min Curve radius (m): 12 Controller: Resistencia or IGBT Braking method: Mechanical
china coal 0001 Introduction of 10t CJY10/6.7.GP Trolley Mine Locomotive 10t CJY10/6.7.9GP Trolley Mine Locomotive, with the features of great tractive effort, heavy duty loading capacity, smoothly climbing and moving, safe braking control system, reliable and easy operation, simple maintenance, 25-30% energy saving compared to DC driving type, less emission, eco-friendly, etc, be widely used in large coal mines. Parameter of 10t CJY10/6.7.GP Trolley Mine Locomotive Specifications CJY10/6GP    CJY10/7GP Adhesive Total Weight (t) 10 10 Track Gauge (mm) 600 762 Wheelbase (mm) 1100 1100 Wheel Diameter Over Tread 680 680 Coupler Height over Steel Rail(mm) 320/430 320/430 Min Curve radius (m) 7 7 Pantograph Operation Height (mm) 1800-2200 1800-2200 Braking Method Mechanical&Electrical Mechanical&Electrical Max Tractive Effort (KN) 27.5 27.5 Max Speed (km/h) 20 20 Rated Speed (km/h) 10 10 Power of Traction (kw) 2*22(30) 2*22(30) DC Input Power Voltage DC250/550 DC250/550 Transmission Single Level Spur Gearing Single Level Spur Gearing Controller AC Frquency Conversion AC Frquency Conversion Over all Dimensions (mm) 4460*1060*1590 4460*1340*1590 Service  & Application Mucking in Mining&Tunneling Mucking in Mining&Tunneling
CJY3/6B IGBT trolley locomotive adopts module design with step-less speed regulation. Its large starting torque makes the operation of the locomotive smooth. And its structure is compact. Features: 1. 3T trolley lcoomotive adots IGBT step-less speed regulation, achieving large starting torque and smooth operation. 2. 3T trolley locomotive adopts imported power component which can save 35% of energy. It has a betterenergy saving effect than that of Thyristor speed control locomotive. 3. 3T trolley locomotive adopts electric braking and mechanical braking to ensure the safety of the locomotive. Model No.CJY3/6(B) Adhesive / Total Weight (t)3T Track Gauge (mm)600762 or 900mm Traction (KN)5.74kN Max. Traction (KN)7.36kN Speed(Km/h)7.5km/h DC Voltage (V)250V Power (KW)*Unit6.5kw2 DimensionsLength(mm)3035mm Width(mm)920/1082/1220mm Height(mm)1550mm Wheelbase (mm)850 mm Wheel Diameter (mm)Φ520 mm Pantograph Height1800~2000mm Min Curve Radius (m)6m Transmission MethodDual Level Gearing ControllerIGBT Braking MethodElectric+Mechanical Brake
High quality heavy duty trolley specially made for jumbo cylinders for transporting and standing. Two strong 6 inches wheels provided in the back and special handle provided on the top to easy movements of cylinders. Made of strong and precise steel tubes/pipes with heavy base made of steel flats. Finish: pre-treated and epoxy powder coated
2.5T Explosion Proof Battery Locomotive adopts module design, step-less speed regulation.The control part sets multiple protection to improve the safety of the locomotive. It is characterized by a smooth starting, stable operation, small size, short wheelbase, quick expansion brake, reliable brake, less maintenance, and electric brake make the locomotives are more safe and reliable. The simple structure is easy for maintenance. The Battery locomotives are applied to galery transportation in the small mine and call car in the medium-sized and small mine. Model No.CTY2.5/4, 6,7,9B Specifications Adhesive / Total weight (t)2.5 Track gauge (mm)472, 600,762, 900 Traction (KN)2.55 Max. Traction (KN)6.13 Speed(Km/h)4.53 Max.Speed(Km/h)10 Battery Voltage (V)48 Battery Capacity (Ah)320 Power (KW)3.5*1 DimensionsLength(mm)2330 Width(mm)914,1076 or 1214 Height(mm)1550 Wheelbase (mm)650 Wheel diameter (mm)460 Min Curve radius (m)5 ControllerIGBT Transmission MethodDual Level Gearing Braking methodElectric+Mechanical Brake
Ammonium nitrate is a chemical compound with the chemical formula NH4NO3. It is a white crystalline salt consisting of ions of ammonium and nitrate. It is highly soluble in water and hygroscopic as a solid, although it does not form hydrates. It is predominantly used in agriculture as a high-nitrogen fertilizer. Its other major use is as a component of explosive mixtures used in mining, quarrying, and civil construction. Packing: 50kg bags, 1000kg / 1200kg jumbo bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Total Nitrogen Content, %: Min 34 Total Nitrogen Content, %: 17.0 Nitrate Nitrogen, wt. %: 17.0
Features of sisal fiber Sisal is a common species of agave, mainly grows in tropical regions. The sisal fiber, extracted from the leaf sheath, has the characteristics of white, Tough texture (strong tensile force), flexible, resistant to sea water immersion and rub, less glue, not easy to slip and others. Applications of sisal fiber Sisal fiber is widely used in navigation, oilfield, mine, lumbering, architectural industry, civil use and transportation. Such as gypsum board, wall paper, paper pulp, sisal ropes, cat toys, insole, brush, bouquet packing, aircraft and bouquet packing.
Prilled Urea is a nitrogen fertilizer and contains 46% N. Urea is the most popular nitrogen fertilizer source. According to the International Fertilizer Association the product represents 56% of the world market. The standard crop-nutrient rating (NPK rating) of urea is 46-0-0. A prill is a small aggregate or globule of a material, most often a dry sphere, formed from a melted liquid. Prilled is a term used in mining and manufacturing to refer to a product that has been pelletized. The pellets are a neater, simpler form for handling, with reduced dust. Packing: 50kg bags, 1000kg / 1200kg jumbo bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance: Prilled White Total Nitrogen %: Min 46 Biuret %: Max 1.0 Moisture %: Max 0.5 Particle size %: (1-2.4mm) 90%
10 Ton Xiangtan trolley locomotive for underground tunnel The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive / total weight (t) : 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW) : 21*2 30*2 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical
Frequency Control 10-Ton Trolley Locomotive The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive / total weight (t) 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW : 21*2 30*2 | 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical
