Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Chikmat Coating Agent Chikmat is a white to cream color fine fluffy powder. It is partially soluble in cold water. It helps to serve the dish tastier. Features: It adds extra taste while mixing with masala. It gives Mouth feel while eating. Acts as a less oil observant. Application: Coating agent in Non Vegetarian Dishes Coating agent in Vegetarian Dishes Hotels, fast foods and in Homes
Corn starch is a common food ingredient, used as Corn Flour for thickening sauces or soups, and in making corn syrup and other sugars It is versatile, easily modified, and finds many uses in industry as adhesives, in paper manufacturing, as an anti-sticking agent, and textile sizing application. Native Maize Starch Used as Thickener, Anticaking agent, The binding agent, Coating agent Applications: Thickener in sauce, soups, masala powder Used as a coating agent for fried foods to enhance crispiness
Silica is mainly used as a carrier of agricultural chemicals. Finely crushed silica powder is coated with agricultural chemicals and sold on the market for agricultural use. Silica itself has no effects; it merely serves as a carrier, and so can be dispersed without affecting the farmland, which makes it advantageous as a core material. It's used as Fire-resistant product powder, Agricultural chemical carrier, Agricultural chemical carrier, Construction board
CWS-MS is Maize based pregelatinized starch. It is Plant based, physically modified and Non GMO fine powder made from maize, which is moderately soluble in cold water and has a very good binding strength. CWS-MS is a Perfect additive for coating the nuts and snacks. CWS-MS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
CWS-TS is a Tapioca based pregelatinized starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
CWS-PS is a clean label starch cold water soluble potato starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
CWS-MS is Maize based pregelatinized starch. It is Plant based, physically modified and Non GMO fine powder made from maize, which is moderately soluble in cold water and has a very good binding strength. CWS-MS is a Perfect additive for coating the nuts and snacks. CWS-MS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
CWS-TS is a Tapioca based pregelatinized starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.
n product. Texture Feature: Light creamy to white color fine free flowing powder, free from rancidity and foreign matter. Specification : S.No Parameters Specifications 01 Appearance Slightly red color, fine powder 02 Solublity In Cold Water Min. 20% 03 pH Value OF 20% Solution 5.0 To 7.0 04 Viscosity Of 20% Solution In Brookfield Lvdvii+pro Viscometer ( Spindle No : 2 , Rpm 100 , Temp 800c) 50 to 150 cPs 05 Moisture Content, (w/w) Max. 13% 06 Bulk Density, Gm/ml 0.55 To 0.7 07 Ash Content Max. 10 % Application : Coat a piece of washed chicken in this dry mix powder. Then dip the coated chicken piece in the batter* until evenly wet. *Batter preparation: Dissolve 50 g instant crispy fry mix in 85 ml of water. Again roll the dipped chicken piece in a dry mix powder. Fry these coated pieces in a hot oil until it turns golden brown color. Note:100 g of instant crispy fry mix is enough for making 250 g of crispy runchy chicken. Storage : Exhibits excellent stability when stored in closed container under cool and dry ventilated place . Avoid direct sun light. Packing : Available in 25Kgs net weight paper bags with moisture proof line inside.
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). Gum confections made with oxidized starch have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying FEATURES AND BENEFITS Oxidized starch has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. Oxidized starch is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS Oxidized starch is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., Oxidized starch can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness Oxidized starch is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, Oxidized starch expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS Oxidized starch is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. Oxidized starches are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS Oxidized starch has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. Oxidized starch is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Fruit Concentrate and Puree ..
High Quality Cocoa Butter
High quality Turkish Dried Apricot
