Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR
Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70â?? - RoHS compliant Applications - 25G Ethernet
Features - Compliant with SFP+ MSA - Compliant with SFP MSA (INF-8074i) - Support for multi-gigabit data rates up to 10.5Gbps - Support for 1x, 2x, 4x and 8x Fiber Channel data rates - Hot Pluggable SFP 20PIN footprint - Serial ID module on MOD(0-2) - AC coupling of PECL signals - EMI/EMC performance - Low Power consumption
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-LW/LR - 1310nm DFB transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-SW/SR - 850nm VCSEL transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes - Inter Rack Connection
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - Hot pluggable QSFP28 MSA form factor - Compliant to IEEE 802.3ba 100GBASE-LR4 - Supports 103.1Gb/s aggregate bit rate - Up to 10km reach for G.652 SMF - Single +3.3V power supply - Operating case temperature: 0~70â?? - Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) - Receiver: 4x25Gb/s PIN ROSA - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 4.0W - Duplex LC receptacle - RoHS-6 compliant Applications - 100GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Datacenter and Enterprise networking
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Sfp/xfp modules, cwdm dwdm mux demux, patch cord and copper cables, optical circulator, plc splitters and fwdm, media converter.
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system. Standard package
Main processorGrain gm8183 Video input8 ch < bnc input > PerformanceD1 or 8cif Video output1ch tv output , 1ch vga output ResolutionD1/cif System resourceSixfold operation: live recording, playback, backup, remote access, ptz control, mobile monitoring Control modeFront panel, usb mouse, ir remote control, network Audio4ch rca input, 1ch rca output Play back8ch at the same time Ptz1*rs485, support pelco-d, pelco-p procotol Usb2 * usb2.0 Mobile phoneSupport window mobile, symbian, android, iphone and blackberry etc Hdd capacityUp to 2tb, sata interface hdd*1 Network interface1 rj-45 10/100mbps ethernet connector¡¡ BackupUsb disk, network LanguagesMultilingual support User extendDesign boot screen logo by youself Power supplyDc12v, 3a (adapter included) Weight:2.8kg
Product Description â?¢Model Noï¼? OS-QS40-3110D â?¢Data rateï¼? 40G â?¢Distanceï¼?10km â?¢Wavelength (nm)ï¼? 1310 â?¢Sourceï¼?DFB+PIN â?¢DDMï¼? YES â?¢Media Typeï¼? SMF Application â?¢High-speed interconnects within and between switches, routers and transport equipment â?¢Server-Server Clusters, Super-computing interconnections â?¢Proprietary backplanes â?¢Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane â?¢40GBASE-LR4 Ethernet links â?¢InfiniBand SDR, DDR and QDR application Feature â?¢QSFP+ MSA, SFF-8436 compatible â?¢Four independently addressable transmit and receive channels â?¢Highly compact: savings of 60% on edge and board usage compared to four comparable SFP+ modules â?¢Electrically hot-pluggable â?¢XFP-like latch mechanism for ease-of-insertion â?¢Optical connectivity via industry standard MPO/MTP terminated fiber ribbon â?¢Digital Diagnostics Monitoring Interface. allows customer management and monitoring of key modules parameters, analogous to SFP+
Product info �Model No�OS-SP12-Bxx20D �Data rate�1.25G �Distance�20km �Wavelength (nm)�TX1490/RX1310,TX1310/RX1490 �Source�FP+PIN �DDM� YES �Media Type�SMF Applications �Gigabit Ethernet Switches and Routers �Fiber Channel Switch Infrastructure �Other Optical Links Features �Operating Data Rate up to 1.25Gbps �Single 3.3V Power Supply �Compliant with SFP MSA and SFF-8472 with simplex LC receptacle �Class 1 FDA and IEC60825-1 Laser Safety Compliant �Operating Temperature: Com.0°C ~+70°C/Ind.:-40°C ~+85°C /Ext.:-20°C ~+70°C �Compliant with MSA SFP Specification �IIC communication rate does not exceed 400Kb/s
Name: 40G QSFP+ to 4xSFP+ Brand: Ousent/OEM Model Noï¼?OS-AO4X-85XXMD Data rateï¼?40G Wavelength (nm)ï¼?850 Sourceï¼?VCSEL/PIN DDMï¼? YES Fiber Typeï¼?MMF Applications 10G/40Gigabit Ethernet InfiniBand4x SDR, DDR, QDR Data Aggregation, Backplane and Proprietary Density Applications Fiber Channel Features Electrical interface compliant to QSFP+ connector (SFF-8436) and SFP+ connectors (SFF-8431) 850nm VCSEL transmitter, PIN photo-detector receiver Maximum aggregate data rate: 40 Gb/s (4 x 10Gb/s) Active Optical Cables Length up to 100m Low Power dissipation
Applications: Reliable provides a price-competitive Athermal and Thermal AWGs, the low cost and high performance make them the ideal solution for metro and long haul networks. The Thermal AWG modules are part of products based on silica-on-silicon planar technology and a unique thermal packaging design requiring no electrical power, software or temperature control for a completely passive DWDM solution. Each module can perform Mux and Demux functions. Both C and L band devices are available with Flat-top spectral response. ABS Boxes or Bare Type,Need detailed specification, ask me
Fiber optical transceivers(sfp, sfp+, xfp, bidi, x2, xenpak, aoc, dac), passive modules(wdm mux/demux), optical quipment.
Global tech gt-pcm-c series pcm multiplexer chassis can take 64k bps timeslot as granularity, construct n* 64k bit nd approximate 50w maximum power consumption. * varied service types and port quantities are configurable flexibly in chassis. * ¡ö rx range: ¡ü 27db ¡ö transmission distance Multi mode fiber: 5km Single mode fiber: 20/60/120km ¡ö jitter feature: comply with g.742 and g.832 ¡ñ ethernet interface ¡ö 10m/ 100m auto negotiation ¡ö full/ half auto negotiation ¡ö related standard: iee802.3, iee802.1q (vlan) ¡ö connector: rj45 ¡ö mdi/ mdix auto negotiation ¡ö mac address table: up to 4096 ¡ñ e1 interface ¡ö bit rate: 2.048m bps ¡à50ppm ¡ö coding: hdb3 ¡ö timeslot control: pcm30£¬pcm31 ¡ö impedance: 120¦¸ (balanced), 75¦¸(unbalance) ¡ö port feature: comply with g.703 ¡ö connector: rj45 (120¦¸), bnc (75¦¸) ¡ö jitter feature: comply with g.745 and g.832 ¡ñ fxo/s interface ¡ö sampling frequency: 8k hz ¡à50ppm ¡ö encoding law: a-law ¡ö impedance: 600¦¸ ¡ö overload point: +3.14dbm ¡ö related standard: comply with itu-t g.712¡¢g.713 ¡ñ rs232 interface ¡ö interface rate: asynchronous rate: ¡ü19200bit/s ¡ö interface level: rs232 level ¡ö working type: dce ¡ö connector: rj45. ¡ñ v.35 interface ¡ö bit rate: n* 64kbps, n=1~32 ¡ö electrical feature: comply with itu-t v.35 ¡ö cpe port: comply with iso2593 ¡ñ nework management interface ¡ö port type: 10/100 base -t ¡ö interface level: rs232 level ¡ö protocol: tcp/ip ¡ö standard: comply with ieee 802.3 ¡ñ operation environment ¡ö working temperature: -10¡æ~ 60¡æ ¡ö storage temperature: -40¡æ~ 85¡æ ¡ö relative humidity: 0%~ 95%, non-condensing ¡ö no corrosive and solvent gas, no dust and heavy emi ¡ö power supply Ac 180v~ 260v Dc -72v~ -36v ¡ö power consumption: ¡ü 50w ¡ö physical dimension: 4u chassis: 482mm(w)* 177mm(h)* 280mm(d) Standard
