Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%. Material transfer applications: Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer Drilling mud transfer Waste pit cleaning Hazardous waste recovery Oil sludge, tank bottoms residual removal and transfer Barge holdings and vessel bottom clean out Bulk tank and silo transfer of material Sand; Course, fine, conventional and frac sand Diatomaceous earth Animal waste etc.
Mission 2500 Supreme Pump Parts Seal, O.B. Brg Housing also called Outboard Bearing Housing Seal, P/N H7496-253 648402295. The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Also available, Horizontal and Vertical Close Coupled Magnum.
Sandman 8x6x11 Replacement NOV Mission Magnum Centrifugal Pumps with 11 inch impeller that widely used for provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer. MISSION Magnum I pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2�½-in. alloy steel shaft protected from wear by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp and are available in hard iron, stainless steel, aluminum bronze, and high Chrome with capacities up to 3,400 gal/min and pressure head up to 550 ft. Some sizes can be offered in a counterclockwise rotation giving the user more flexibility. Mission MAGNUM I Sand Pump Tobee�® as a professional centrifugal pump manufacturer in China, with more than 34 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking. Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
Sandman 8x6x11 Mission Magnum Centrifugal Sand Pump with open type impeller 19121-70-30 and hard iron casing 19763-01-30A is widely used for handle the barite, ferric oxide and mineral oil base drilling muds. MISSION Magnum I pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 through 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2½-in. alloy steel shaft protected from wear by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp and are available in hard iron, stainless steel, aluminum bronze, and high Chrome with capacities up to 3,400 gal/min and pressure head up to 550 ft. Some sizes can be offered in a counterclockwise rotation giving the user more flexibility. Mission MAGNUM I Sand Pump Tobee�® as a professional centrifugal pump manufacturer in China, with more than 34 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking. Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6x5x11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
AISI 4140 Shaft 20612-02-33 can be used for Mission Magnum I Centrifugal Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14 Sand Pumps. offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz. The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6511 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Weir SPM, Serva, FMC. We can supply the Spare Parts for the Pump Models as follow: HQ 1400 4 fracturing pump SPM2000-5" fluid end HQ-1400/2000 Frac Pump Fluid End Asembly SPM-TWS 600 Triplex Plunger Pump SPM QWS2500 Quintuplex Plunger Pump Compatible TWS-2000/2250 Frac Pump Fluid End Assembly Halliburton HT400 plunger pump Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump GD-2500 Quintuplex Plunger Pump Compatible OPI 1800AWS Frac Pump Compatible
Tobee offers replacement MCM 250 series Centrifugal Pump 3x4x13 and Nov Mission 2500 Supreme Pump 4x3x13 Halco 2500 Supreme Pump 4x3x13 Mission 2500 Supreme Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 2500 Supreme is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration Design Features Versatile stuffing box Thick strong concentric casing with replaceable casing wear pad Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models Replaceable stuffing box cover with dual stuffing box bolts Longlife noadjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semiopen impeller creates lower axial thrust for improved bearing life All sizes feature the same power end
Tobee Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3 2 13 through 8 6 14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachromeâ?¢, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Also available, Horizontal and Vertical Close Coupled Magnum.
Inboard Bearing Cover Labyrinth Seal H2564-4 P/N 2564-4H Buna-n used for 2500 Supreme 3 x 2 x 13, 4 x 3 x 13, 5 x 4 x 14, 6 x 5 x 11, 6 x 5 x 14, 8 x 6 x 11, 8 x 6 x 14, 10 x 8 x 14 Pumps. The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
20616-1 Stock no. 648408201S Bearing O.B for Magnum Centrifugal Pump 8x6x14, 6x5x14, 6x5x11, 5x4x14, 5x4x11, 4x3x13, 3x2x11. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Also available, Horizontal and Vertical Close Coupled Magnum.
Sandman Mission 2500 4x3x13 Pump Impeller H19206XX30 is same and match 250 series 3x4x13 Centrifugal Pump Impeller P25D343MRxxx The 250 series Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 250 series is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration Design Features Versatile stuffing box Thick strong concentric casing with replaceable casing wear pad Casing gasket receded for protection Replaceable stuffing box cover with dual stuffing box bolts Longlife noadjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semiopen impeller creates lower axial thrust for improved bearing life All sizes feature the same power end
Warman slurry pump replacement from China supplier: HS (R)Series Introduction: HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series. Features of centrifugal slurry pump: 1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time. 2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining. 3.Bearing assembly use grease lubrication. 4. Seal types: packing seal, expeller seal and mechanical seal. 5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications. 6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. 7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance. Specification of ash slurry pump : D:25 mm to 450 mm Q: to 5,000 m3/hr H: to 73 m z
Product Description SV (R) Series Introduction: SV(R) series is vertical centrifugal sump slurry pumps, which is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Application of warman verticals pump: SV(R) slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries , and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump Features of weir warman sump pump: 1. Metal or rubber lined wet parts 2. Double suction semi-open impeller 3. Agitator option keeps solids in suspension 4. Recessed impeller option passes over-sized material Specification of warman verical slurry pumps: D: 40-200 mm Q: 17-891m³/h H: 4-37 m z
H19117-01-30A Casing is an important Wear Parts for Mission 8x6x142500 Supreme Centrifugal Pumps. The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Fluid end parts available with Supreme Hard material that has a 400 Brinell hardness. The standard impeller, casing wear pad and stuffing box are Ductile Iron to ensure even wear characteristics. Casing provided with replaceable casing wear pad on 4x3x13 â?? 10x8x14 models. Design Features: Versatile stuffing box Thick, strong, concentric casing with replaceable casing wear pad Casing gasket receded for protection. Replaceable stuffing box cover with dual stuffing box bolts Long-life, no-adjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semi-open impeller creates lower axial thrust for improved bearing life All sizes feature the same power end
Polyurethane Pump Spares are made by the material of a polymer composed of organic units joined by carbamate (urethane) links, so the work life of Polyurethane pump parts is longer than Rubber materials for 3~5 times, Slurry Pump Polyurethane Spare Parts include PU Impeller, PU Throat bush, PU Frame plate liner, PU Cover plate liner, PU Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here. Polyurethane Slurry Pump Parts widely used in Mining, Mineral Processing, Paper pulp, Sands, Gravels, Dredging, Coal Prep, Cyclone Feeds, Chemical Slurry Service, Tailings, Aggregate Processing, Ash Handling, Fine Primary Mill Grinding, Secondary Grinding, Iron Ore, Cooper, Oil field, Diamond, Alumina, Coal, Gold, Silver, Cement, Lead & zinc, Asbestos, Kaolin, Phosphorite, Bauxite, Potash, Mineral sands, Steel, Palm, Sugar, Steeloxyde, Chemical fertilizer, Molybdenum, Tin, Titanium, Power, FGD, Sea water, Food Processing, Cracking Operations, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond, Heavy Refuse Removal, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Frac Sand Blending, Tobacco, Construction, City Sewage, Industrial Processing etc. Slurry Pump Polyurethane impellers have a longer life, which reduces the frequency of replacing them. And because the material is smooth, there is little chance that the slurry will stick to the impeller and clog the pump. Slurry Pump Polyurethane Liners have Cover plate liners, Frame plate liner, The liners are together with throat bush and Frame plate liner insert form a pump chamber, The impeller works in it. The polyurethane liners are generally made of polyurethane without steel skeleton. But the polyurethane impeller, throat bush and frame plate liner insert are embedded the steel skeleton.
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
We are manufacturing equivalent spares for Mission Magnum Centrifugal Pumps. Please inquire with us
20943-21 641102182 Sleeve, Shaft used for Mechanical Seal Mission Magnum Centrifugal Pump. The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications. The I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
