NO2-B43F Nitrogen Dioxide Sensor (NO2 Sensor) Description Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology. Sensors are available in the following sizes: 32mm diameter package, the best choice for fixed site applications The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers. The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. * Range: 20 ppm NO 2 limit of performance warranty * Sensitivity: -175 to -450 nA/ppm at 2ppm NO2 * Response time: < 60 t90 (s) from zero to 2ppm NO2 * Temperature range: -30 to 40'C * Pressure range: 80 to 120kPa * Humidity range: 15 to 85 % rh continuous * Weight: < 13 g
1.Using the most advanced numerical control horizontal 45 inclined bed production with digital operating system. 2.The roller axis and the axis of the boring cutter head from both ends are guaranteed to be on the same axis with precision 4um by high accurate test bar adjusting. 3.Both ends are processed at the same time; the efficiency is more than 3 times of the traditional processing method. 4.The roller clamping uses two sets of v-jig to fix. The boring cutter rotation speed is not controlled by the drum diameter. The drum maximum diameter could reach 100 mm, 200 mm, 300 mm, 400 mm or more (as clients requirements). 5.The chip falls on the conveying chain of the chip removal machine, collected and processed by the chip removal machine. The site is clean with a comfortable working environment.
Functional features: The chair for correcting the sitting posture of the child comprises a chair body and a table plate, wherein the table plate is detachably arranged on the chair body, a column body for correcting leg movements is arranged on the seat plate of the chair body, an elastic fixing strip for correcting foot movements is arranged on a foot plate of the seat body. The utility model has simple structure,Is simple and safe to use, is suitable for correcting the sitting posture of children, and is particularly suitable for children in rehabilitation centers and children with cerebral palsy aged from 2 to 6 years for seat maintenance, seat balance, posture correction, and deformity prevention and treatment. Product Specification: 72 Ã?? 60 Ã?? 80 cm, head cushion upgrade adjustment range: 0 ~ 12 cm, crotch cushion front and back adjustment range: 0 ~ 10 cm, maximum distance from cushion to footboard: 20 cm .
broken tap remover VG-206 Techinical Parameters Total weight:24kg Weight of Power Supply:18.8kg Power:261mm*281*180mm Weight of process device: 5.2kg Process divice:200*55*430mm Automatic process stroke: 100mm Secondary stroke: 370mm Input voltage:220v Power:800w/1000w/1200w Work fluid:water/EDM/kersene(never use cutting fluid) Basic Functions Processing gear adjustment:Press the key Adjustment:6 (3 current, 3 voltage) Depth setting: Adjustable depth Deep hole flushing device: Built in Host universal head: 360 degrees Limit control: Yes Processing mode: Electric pulse Spindle motor: Japan stepper motor Lifting shaft fixed seat: Flange Blind hole processing: Machinable
Fully automatic block machine is fixed, platform vibration type, mechanical deform, the machine design is advanced and reasonable, the application range is wide, adopt the reducer, the brake think magnet curved arm around the mold. The machine adopts 4 upright posts, accurate positioning, stable mould balance, high density of brickwork, small rough edges and good appearance. Fully automatic block machine automation is very high, do not artificially add material, labor intensity is also very low. Vertical vibration of table, pressure head vibration, good forming effect. Using the assembly type mold box, the wearing parts can be replaced, the mold maintenance cost is less. Unique broken arch device, suitable for wide range of materials.
Fully automatic block machine is fixed, platform vibration type, mechanical deform, the machine design is advanced and reasonable, the application range is wide, adopt the reducer, the brake think magnet curved arm around the mold. The machine adopts 4 upright posts, accurate positioning, stable mould balance, high density of brickwork, small rough edges and good appearance. Fully automatic block machine automation is very high, do not artificially add material, labor intensity is also very low. Vertical vibration of table, pressure head vibration, good forming effect. Using the assembly type mold box, the wearing parts can be replaced, the mold maintenance cost is less. Unique broken arch device, suitable for wide range of materials.
Thermostat Operation The differential expansion of the sensing element causes the opening of a snap-action switch in the thermostat head. In case of abnormal temperature rise, a bimetal disc ensures double pole safety. The limiter is manually re-settable. Technical characteristics Type Single pole stem control with single pole bimetal safety limiter Temperature Range0 to 160°C SAFETY LIMITER TEMPERATUREFixed 70 to 120°C Rating15a – 400V / 20A – 250V MATERIALBrass, invar, bimetal Stem Lengthup to 450 mm Connections Brass faston or screw terminals Approvals CE conformity, ENEC mark according to EN 60730-1, EN 60730-2-9, ROHS conformity Independent non self resetting safety function Over temperature cut out Available with single pole limiter or as control only Factory pre-set fixed temperature limiter End-user adjustable control temperature
12w led mini moving head spot light No.: m-h1201 Power supply: ac100-240v, 50-60hz Power consumption: 26w Light source: 1 * 12w lumens led white light Led life: rated at about 50, 000 hours Beam angle: 13 â° Gobo: 7 fixed patterns + white, pattern anti-shake effect, pattern rolling mode Color wheel: 7 colors + white Control mode: dmx512, master-slave and voice control or automatic operation Dmx channel: 9/11 dmx channel Rotation angle: 540 â° horizontal / 230 â° tilted (16-bit), pan / tilt reversed mode Prism wheel: 3 prism, two-way rotation speed Dimming: 0-100%, 5 kinds of optional dimmer curve net weight 3kg Gross weight: 3.5kg Dimensions (lxwxh): 159 * 147 * 265 mm
Specifications High-performance single head insertion machine plug eyelet or pin. Simple, practical, energy conservation. Xg-9000/ai/tht/pcba/smt Feature:vibrating feeder sequence bulk rivet(1.6mm-3.5mm), long rivet(20mm), or taped rivet and feed to machines insertion head, the head will put the rivet in pcb and fix the rivet at the speed of 15000pcs/h. Change pcb automaticly or manually, it is optional. Application software bases on windows2000 operating system, user friendly interface, bring you better quality and higher efficiency. 1 insertion rate 15000pcs / h 2 non-performing rate less than 500 ppm 3 pcb size (min)50 mm x50mm(max)450mm x 450mm 4 pcb thickness 0.79mm-2.36mm 5 components available rivet1.6-3.5mm, long rivet, tape packed rivet, 2-3 insertion head optional. 6 machine size (l w ) 1500mm450mm500mm 7 machine weight 1500kg 8 power supply 220v, ac (single phase) 50/60 hz, 1.0kva; 9 system protection ups, keep machine run 15 minutes without power 10 working power 960w (energy-saving) 11 air pressure 0.4-0.6 mpa 12 air consumption 0.1 m3/minute 13 circumstance temperature 5-25 14 machine noise 55 db 15 coordinate correction machine vision systems, multi-point mark vision correction. 16 driving system ac servo ac motors 17 data input usb interface input (excel format) 18 control system english version interface (windows system control platform)lcd monitor 19 working table direction form left to right, from right to left; clockwise or anticlockwise 20 pcb transfer mode manual / automatic optional
BA-50G Battery Led Moving Head Beam 50W battery LED moving head beam light with glass lens optic system. static gobo wheel variable frost, 8-faceted prism, full range dimming and variable strobe effects. The BA-50G is a innovational battery led moving head which can still hold events without any cables. It Is a battery-driven with an impressive 7-9 hours operation in typical use. Receiving signal with internal WIFI receiver. 50W battery LED moving head beam lightwith specific high precision glass lens optic system. The PAN/TILT movement is smooth and quiet. Effects features consist of a combination of static gobo wheel variable frost, 8-faceted prism, full range dimming and variable strobe effects. Light Source 1* 50W white led lamp Life span: 50000 hours Color: Cool white , 7500K Optics Beam angle:2° Power Supply Power supply:Battery or AC mains Input Voltage:AC90-260V 50/60Hz Power Consumption: Sate of charge 178W; non-charged state: 78W Battery Battery type:Lithium iron Battery charge time:0% to 100% charge 5.5 hours, Max-endurance:8 hours(Full power), 8 hours(built-in program) Temperature detection function :(-20 to 45 ) Battery protection:Battery short circuit protection, over current protection,overflow charging Charging mode:When connected to mains and power is insufficient, battery will be charged automatically. Support battery extension. Control Control Signal: DMX512, master-slave and sound activated ,auto operation,wireless Control Channel: 12/10 DMX channels USITT DMX-512. DMX recorder and edit function integrated Movement 8/16 bit smooth and precise resolution for PAN/TILT movement 360°/540°/630° PAN and 90°/180°/270° TILT movement PAN/TILT reversible advantage PAN/TILT calibration available Scan position memory, auto preposition after unexpected movement Color Wheel 1 Color wheel with 14 colors plus open Gobo Wheel 1 Static gobo wheel with 17 gobos plus open Working Environment Fan cooling system -35-45°C max ambient temperature Constant temperature readout and management function. Protection Rating : IP 20 Construction & Weight Dimensions:38.5*30.6*22.4(CM) Packing Dimensions: 40*29*44.5(CM) Net Weight:11.2kgs Gross Weight: 13.2kgs Features ABS die-cast plastic cover with Aluminium structure 8-Facet prism with variable speed and direction 0-100% Linear LED dimmer 28T/sec high speed LED shutter/strobe effect with variable speed Preset variable/random strobe and dimming pulse effect 2m-20m electric focus 2.4TFT LCD display (320*240pix) POWERCON connector IN 3-Pin XLR connectors IN/OUT 55dB at 3dB rating 2*1/4 turn fastening Omega clamp 1* Safety attachment point Hot Tags: battery LED moving head beam 50w, China, manufacturers, suppliers, factory, customized, wholesale, bulk, cheap, price, quotation
DESCRIPTIONï Four cylinder, horizontally opposed engine, with liquid cooled cylinderheads, electronic fuel injection and dual ignition system, automatic altitude compensation, wet sump pressure lubrication FEATURERSï 1.Liquid cooled cylinderheads, electronic fuel injection and dual ignition system. 2,The ratio of power weight is higher. 3.Extremely low failure rate. TECHNICAL DATA: Maximum Power 74 kW / 100 HP at 3000 rpm Displacement 2424 cm3 / 147.91 cub. in. Compression ratio 9.5 : 1 Ignition Electronic engine management Fuel min. octane 98 RON (Unleaded) / AVGAS 100 LL Dry weight 76 kg, plus accessories Fuel consumption 265 g/kWh at WOT,245 g/kWh at part throttle. APPLICATION: Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship. OTHER INFORMATION: We can provide propellers, generators(for UAV), start-generators and other accessories.
Description Four cylinder, horizontally opposed engine, with liquid cooled cylinderheads, electronic fuel injection and dual ignition system, turbo charger, automatic altitude compensation, wet sump pressure lubrication Featurers 1.Liquid cooled cylinderheads, electronic fuel injection and dual ignition system. 2, the ratio of power weight is higher. 3.Extremely low failure rate. 4.Turbo charger, full take off power up to 3500 meters. Technical data: Maximum power 96 kw / 130 hp at 3000 rpm Displacement 2424 cm3 / 147.91 cub. In. Compression ratio 8 : 1 Ignition electronic engine management Fuel min. Octane 98 ron (unleaded) / avgas 100 ll Dry weight 86 kg, plus accessories Fuel consumption 255 g/kwh at wot, 240 g/kwh at part throttle Application: Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship.
DESCRIPTION Four cylinder, horizontally opposed engine, with liquid cooled cylinderheads, electronic fuel injection and dual ignition system, automatic altitude compensation, wet sump pressure lubrication FEATURERS 1.Liquid cooled cylinderheads, electronic fuel injection and dual ignition system. 2,The ratio of power weight is higher. 3.Extremely low failure rate. 4.Turbo charger,full take off power up to 3500 meters. TECHNICAL DATA: Maximum Power 118 kW / 160 HP at 3000 rpm Displacement 2424 cm3 / 147.91 cub. in. Compression ratio 8 : 1 Ignition Electronic engine management Fuel min. octane 98 RON (Unleaded) / AVGAS 100 LL Dry weight 86 kg, plus accessories Fuel consumption 255 g/kWh at WOT,240 g/kWh at part throttle. APPLICATION: Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship. OTHER INFORMATION: We can provide propellers, generators(for UAV), start-generators and other accessories.
Braun Card D421.51U1 Steam turbine parts YOYIK knows that innovation is the core driving force of corporate development, so it continues to increase R&D investment and establish an advanced R&D center, focusing on improving product performance and efficiency, reducing energy consumption, and reducing environmental impact. The company has also carried out in-depth cooperation with many scientific research institutions and universities at home and abroad to jointly explore cutting-edge technologies in the power equipment industry and promote technological innovation in the industry. Yoyik can offer many spare parts for power plants as below: #DF-Braun Card D421.51U1 Steam turbine parts-DF Eddy Current Sensor PR6422/000-140 proximity probe sensor CON021/916-100 speed sensor CS-1 G-065-04-01 circuit board ME8.530.004 LVDT Sensor 6000AT LVDT Sensor Z96200WN pick up coil sensor ZS-04 non contact linear position sensor 5000TD-E Protective Relay CSC 237A LVDT Sensor TD-1G-400-15 Wrnk2-131 Pressure Switch 5NN-K45-N4-F1A Pressure reducing valve PQ-235C eddy current sensor are used to TM0180-A05-B05-C03-D10 Wrnk2-131 LVDT sensor ZD-5000TD Bolt heater DC control cabinet ZDK-IV 60KW Analog RTD LP Case exhaust WTYY-1031 Eddy Current Signal Converter CON011/912-015 Analog Output Module HAO805 Vibration sensor HD-ST-2 Differential pressure switch BDSN4KB25XFSHX sensor TM0180-05-05-03-10-02 pressure transducer sensor YWK-50-C Torque Control Module SY-JB (Ver 2.10) Bolt electric heating rod ZJ-17-T4(R) non contact linear sensor DET700A speed sensor CS-4-100-02-02 cable ZC-KVVP-0.45/0.75 8mm Eddy Current Sensor TM301-A02-B00-C00-D00-E00-F00-G01 LVDT Sensor 191.36.09.13 Magnetoresistive speed probe HRY1-A100-B02-C02-D05-E080 Flow Switch LKB-01B Eddy Current Sensor PR6423/001-110 Pt100 -RTD temperature probe 20cm Probe length, Fixing Thread: 1/8" G or NPT INSULATING PULLING ROD ZN63-VS1-12KV Braun Card D421.51U1 Steam turbine parts MY-DFYL-2024-7-18
PRODUCT OVERVIEW EPS Styrofoam CNC Router Machine for Foam Mould Milling carving 3 axis 4 axis for sale Gildemerster Styrofoam Moulding CNC Router machine is one type of CNC Router Machine which is designed for do engraving and carving job on styrofoam foam and other foam type to make mould or EPS sculptures .Machine has been designed with extra heavy duty structure ,gantry with higher power driver and motors to enable machine has bigger loading size as well as carving distance for Z axis .Normal CNC Router Machine normally has 200-300mm working size for Z axis .however ,when it comes to carving work on EPS or styrofoam for different mould or sculptures,it would be noticed that small distance between gantry and machine table could not handle the size .Styrofoam Moulding CNC Router machine had been developed under this circumstance and good to used for making statue ,sculptures and other molds and which requires high accurate carving and engraving job. Specifications : Product Name: Styrofoam Moulding CNC Router Model: MD-25F1 Carving size :1500X3000X500mm Machine body: Whole steel welded heavy duty Controller: DSP/NCstudio/LNC/Taiwan Syntec Spindle:7.5Kw-12Kw Spindle speed: 3000-18000rpm Drivers Servo motors Rails: Taiwan TBI Power transmission: X&Y rack and pinion ,Z ballscrew Working speed: 0-10000mm/min Collet: ER32/BT30/BT40 Command Language: G-code,M-code Voltage: 380V/50HZ Weight: 3800KG Applications: Gildemeister Styrofoam Moulding CNC Router machine is mainly used on EPS foam, wood material for the industry such as Casting woodmold ,Automotive ,Interior decoration ,Engineering plastic and other high precision non metal 3D carving work .Except for Styrofoam Moulding CNC Router ,Gildemeister CNC manufacture all type of CNC equipment including : CNC Router Machine ,CNC Laser Machine ,Plasma Cutting Machine ,CNC Lathe Machine ,CNC Drilling and milling machine etc .Our company has been working in the CNC filed for more than decades and gained lot of experience in machine building ,problem fixing and capable of offering good service after sell .If it happens that you have job which requires a CNC equipment no matter for wood or metal ,we would be happy to know the detail of your work request to offer you the best solution for the job as well as a reliable cnc machinefor your work .
PSSHM-001. Professional warm ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc. Men/women adult single board/double board warm, breathable and safe ski protective gear. Professional Warm Ski Helmet: PSSHM-001. Main material: ABS+EPS+velvet cotton. Head circumference size: S51-54cm, M54-58cm, L56-59cm, XL59-61cm. Product Color: Black Stripe, Orange, Rose, Sky Blue, Matte Black, Matte White. Features: Porous adjustable ventilation system (cold air intake and hot air distribution) to accelerate hot air discharge; woven-character trademark is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications. Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification. Step Price (FOB): 1. Sample unit price USD58.46 2.200set, USD35.08 3.400set, USD31.57 4.600set, USD28.41 5.800set, USD25.57 6.100set, USD23.00
PSSHM-001C. New high-end ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment. New high-end ski helmet: PSSHM-001C. Main material: ABS+EPS+velvet cotton. Head circumference size: M55, 58cm, L59, 61cm. Product color: black, white. Features: Porous adjustable ventilation system (cold air intake and hot air distribution) to accelerate hot air discharge; woven-character trademark is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications. Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification. Step Price (FOB): 1. Sample unit price USD80.77 2.200set, USD48.46 3.400set, USD43.61 4.600set, USD39.25 5.800set, USD35.33 6.100set, USD31.80
PSSHM-014. Lightweight ski helmet with animal print. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment. Different colors are matched with animal figure prints, love animals, and get close to nature. New animal print lightweight ski helmet: PSSHM-014. Main material: ABS+EPS+velvet cotton. Head circumference size: S(51-54cm), M(55-58cm), L(59-61cm). Product color: black dog, white rabbit, pink cat, white dog, white eagle, black eagle. Features: Porous adjustable ventilation system (cold air introduction and hot air distribution) to accelerate hot air discharge; woven logo is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; dial-type 360 �?�¢??�?�¢??on the back of the helmet The adjustable knob can easily adjust and tighten the overall fit of the head circumference, making it more comfortable to ride; the elastic band fixing bracket for ski goggles is suitable for fixing ski goggles of different specifications. Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification. Single product carton: 25*27*25cm Single product net weight: 480g Product carton: 127*53*29cm Carton weight: 9.6kg Packing Quantity: 10pcs Step Price (FOB): 1. Sample unit price USD80.77 2.200set, USD48.46 3.400set, USD43.61 4.600set, USD39.25 5.800set, USD35.33 6. 100set, USD31.80
PSSHM-015. Camouflage fish print light ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment. New camouflage fish print lightweight ski helmet: PSSHM-015. Main material: ABS+EPS+velvet cotton. Head circumference size: M(54-57cm), L(58-61cm). Product color: military soul camouflage fish shape, pink camouflage fish shape. Features: Porous adjustable ventilation system (cold air introduction and hot air distribution) to accelerate hot air discharge; woven logo is sewn on the outside of the ear pads, and a fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; Removable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications. Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification. Single product carton: 25x27x25cm Single product net weight: 380g Product carton: 127x53x29cm Carton weight: 9.60kg Packing Quantity: 10pcs Step Price (FOB): 1. Sample unit price USD80.77 2.200set, USD48.46 3.400set, USD43.61 4.600set, USD39.25 5.800set, USD35.33 6.100set, USD31.80
PSHM-011. Lightweight premium ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment. New lightweight premium ski helmet: PSHM-011W. Main material: ABS+PC+EPS+velvet cotton. Head circumference size: S (51-55cm, 380g), M (55-59cm, 400g), L (59-61cm, 450g). Product color: 8 optional colors. Features: ABS+PC+EPS one-piece design; porous adjustable ventilation system (cold air introduction and hot air dissipation) to accelerate hot air discharge; the outer/inner side of the ear pads are sewed with fan-shaped sandwich mesh to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications. Product Certification: Has passed CE, ASTMF2040, EN1077B, CPSC / ASTM certification. Step Price (FOB): 1. Sample unit price USD64.62 2.200set, USD38.77 3.400set, USD34.89 4.600set, USD31.40 5.800set, USD28.26 6. 100set, USD25.43
