Application The machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. The machine is specially applied to vacuum filling oil and drying for power transmission equipment that are over 110kv. Feature 1. Ph of treat oil5.5 2. Acid value0.03mgkoh/g 3. Flash point145 4. Anti-pressure¥60kv 5. Dielectric loss: dielectric loss: tg (90°c)%0.001 6. High vacuum: high point-vacuum5pa; working-vacuum35pa 7. High absorption speed: absorption speed power333l/sr. 8. Duplex 3d stereo-evaporation, eliminating the liquid water quickly 9. Uk g technology, by which the trace water that is show chain, such as dissolved water, can be removed effectively 10. Instinctively removing impurities system filtering through the double fh trapezoidal network and absorbing by high polymer without mechanical power 11. Argon fiber infrared heating system that can make the oil contain zero sum of ethyne after the treatment.
t is manual grease pump or injector which is used in injecting lubricant for equipments like bearings, valves, engines, etc. It consists of an oil injector and a tank which has a capacity of 13L. And it is widely applied in automatic maintenance, electricity generators or turbines, pumping units, cranes, and hoists etc. Techniques: 1) High pressure pump 2) Hose length: 2.2m 3) Tank capacity: 12L 4) Weight N/G: 10kg
It is manual grease pump or injector which is used in injecting lubricant for equipments like bearings, valves, engines, etc. It consists of an oil injector and a tank which has a capacity of 13L. And it is widely applied in automatic maintenance, electricity generators or turbines, pumping units, cranes, and hoists etc. Techniques: 1) High pressure pump 2) Hose length: 2.2m 3) Tank capacity: 12L 4) Weight N/G: 10kg
It is manual grease pump or injector which is used in injecting lubricant for equipments like bearings, valves, engines, etc. It consists of an oil injector and a tank which has a capacity of 13L. And it is widely applied in automatic maintenance, electricity generators or turbines, pumping units, cranes, and hoists etc. Techniques: 1) High pressure pump 2) Hose length: 2.2m 3) Tank capacity: 12L 4) Weight N/G: 10kg
Palm shell charcoal has the advantage of producing greater heat energy than charcoal in general, which is around 20,093 kJ/kg. As boiler fuel, palm shells produce steam that can drive turbine engines and operate all kinds of steam-based engines . The price listed is the price of the product / tonne (1000 kg), for a minimum purchase of 1 ton (1000 kg)
4,4'-Methylene bis(dibutyldithiocarbamate) Product Code: E1414 Brand Name: Petrolem® T323 CAS No.: 10254-57-6 Main Content: 99% Application: T323 is an ashless extreme pressure additive for Compressor Oil, Gear Oil,Grease, Hydraulic Oil,Turbine oil,and has good performance of antioxidant and friction reducer. It has the same good performance as vanlube7723. T323 is a general purpose of extreme pressure additive with antioxidant and friction reducer, very important : it has advantage of low cost.
Product Introduction As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size, no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape. The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.
Character Colorless or white crystalline particles or powder. Executive Standard GB1886.25-2016 The main purpose Used as a flavoring agent, stabilizer, buffering agent, chelating agent, nutritional supplement, emulsifier, flavoring agent of buttermilk in the food and beverage industry; used as anti-coagulation, phlegm, and diuretic in the hospital industry In the detergent industry, it can replace sodium tripolyphosphate as an auxiliary agent for non-toxic detergents; it is also used in brewing, injection, photographic drugs, and electroplating. Storeï¼? Store in a dry, ventilated, non-polluting environment, avoid direct sunlight, and not easy to stack in the open. It should be used as soon as possible after opening, otherwise, it will be prone to biochemical agglomeration.
A Versatile Specialists Throughout Hospital And Transport Ventilator. Turbine base Ventilator With 12.1 Full Touch Screen Display. Suitable for Invasive as well as Non Invasive Ventilation. Ventilation Modes: PCV/VCV/PSIMV/VSIMV/CPAP/ BIPAP etc. Advance Ventilation modes including: PRVC & APRV etc. 360 degree visible alarm indicator. Automatic Body Weight Calculation. Oxygen Therapy mode built-in (HFNC) Internal Battery Backup up to 3 Hours. Suitable for Transport ventilator (Foldable Screen & Carry Handle
"PVC transparent film sheet PVC-TM-02" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-020 Specifications: 0.2mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-02" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
"PVC transparent film sheet PVC-TM-025" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-025 Specifications: 0.25mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-025" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
99.5% Best Price Antioxidant BHT Butylated Hydroxytoluene(BHT) Antioxidant T501 Butylated Hydroxytoluene(BHT) is a white crystalline solid with a faint characteristic odor. It is insoluble in water and in propylene glycol, but is freely soluble in alcohol. It is obtained by alkylation of p-cresol with isobutene or by monobutylation of m,p-cresol mixtures. APPLICATION For rubber, plastics antioxidant, gasoline, transformer oil, turbine oil, animal and vegetable oil, food and other antioxidants Butylated Hydroxytoluene(BHT) Specification: APPEARANCE white crystals or crystalline powder PURITY 99.5% MELTING POINT 69 - 70 C MOISTURE 0.1% max SULFATE 0.002% max HEAVY METALS 0.0004% max ASH 0.0001% max FREE CRESOL 0.02% max.
Lye series oil refinery machine is special for treating engine/car/ship/black oil, you could get clean and refreshed engine oil after treated by this machine. If this is not your needing type, follow is our catalogue for you to choose: Series zy single-stage vacuum transformer oil purifier Series zyd double high vacuum transformer oil purifier Series zyb multiply-function insulating oil treatment machine Series ty turbine oil purification apparatus Series tya lubricating oil/ hydraulic oil purification unit Series lye engine oil recycling machine Series bod black dirty oil regeneration equipment Series dod diesel oil regeneration equipment Series tyb portable light fuel oil purification machine Series ly plate pressure oil purifier Series tyd vacuum dehydrator Series jl portable oil filtering and oiling machine Series iij oil tester (bdv tester)
Bod series oil refinery machine could ture black and waste engine/car/diesel/motor/lubricating/crude/heavy fuel/rubber oil into base oil. If this is not your needing type, follow is our catalogue for you to choose: Series zy single-stage vacuum transformer oil purifier Series zyd double high vacuum transformer oil purifier Series zyb multiply-function insulating oil treatment machine Series ty turbine oil purification apparatus Series tya lubricating oil/ hydraulic oil purification unit Series lye engine oil recycling machine Series bod black dirty oil regeneration equipment Series dod diesel oil regeneration equipment Series tyb portable light fuel oil purification machine Series ly plate pressure oil purifier Series tyd vacuum dehydrator Series jl portable oil filtering and oiling machine Series iij oil tester (bdv tester)
Petroleum Products: Petrochemicals Trading Includes: the resale of petrochemicals derived from transforming refined oil derivatives and classified as: light petrochemicals such as: Olivares, Butylenes, Ethylene, Propylene, Aromatic compounds, Benzene, D2 Gas Oil Toluene, Xylem Methanol, Formaldehyde, Ammonia And Urea, Intermediate petrochemicals such as: Monovinyl chloride Final petrochemicals such as: Polyethylene, Polyvinyl chloride, Carbon and the Hydrogen such products are used in various commercial and industrial as crude before any treatment or transformative operations. Non Strategic Products: Case By Case Products, Not limited examples Cement & Cement components. Construction's items Steam Coal Met Coke
Alkali-free wax-free glass fiber tape is woven with non-alkali fiberglass yarn.Its characteristics are high heat resistance level,good insulation performance,strong corrosion resistance and so on.It can be used in transformers,motors,electrical appliances,cable filling and banding insulation materials. Main application: Binding motor,transformer,electrical appliances,cable filling material. Specification: Thickness:0.06mm,0.08mm,0.10mm,0.13mm,0.15mm,0.16mm,0.20mm,0.25mm,0.30mm. Width:10mm,15mm,20mm,30mm,50mm,80mm,255mm,etc. Roll length:50m-200m.
100% no asbestos fiber cement board (No asbestos no formaldehyde, no benzene and no any harmful substances) Fiber cement board is also called fiber cement pressure board or cement fiber pressure board, is a natural fiber and cement as raw material, a kind of new building material pulping, molding, cutting, pressing, conservation. Called new generation of "green" building materials, unique environmental protection functions in the fire performance and excellent moisture resistant. It is based on siliceous and calcareous material as the main material, with cellulose fiber reinforced material, mixed with other auxiliary materials.
100% no asbestos fiber cement board (No asbestos no formaldehyde, no benzene and no any harmful substances) Fiber cement board is also called fiber cement pressure board or cement fiber pressure board, is a natural fiber and cement as raw material, a kind of new building material pulping, molding, cutting, pressing, conservation. Called new generation of "green" building materials, unique environmental protection functions in the fire performance and excellent moisture resistant. It is based on siliceous and calcareous material as the main material, with cellulose fiber reinforced material, mixed with other auxiliary materials.
Electric motors scrap, transformer scrap, compressor scrap, automobile ac compressor scrap, washing machine motors scrap, aircon motors, aluminium scrap, zinc scrap, telecom scrap, copper aluminium scrap, stainless steel scrap, aluminium 6063 scrap, electric meters scrap, electronic scrap, small motors scrap, gas meters scrap, harness wire copper cable scrap, mixed copper cable scrap, shredded non ferrous metal with mostly zinc content, shredded non ferrous metal with mostly stainless steel content.
Contactors are divided into AC contactors (voltage AC) and DC contactors (voltage DC), which are used in power, power distribution and power consumption. Broadly speaking, contactor refers to an electrical appliance that uses the current flowing through the coil to generate a magnetic field and close the contact in order to control the load. main features The AC contactor uses the main contact to open and close the circuit and the auxiliary contact to turn on the control circuit. The main contact is generally normally open contact, while the auxiliary contact often has two pairs of normally open contact and normally closed contact. Small contactors are often used as intermediate relays to cooperate with the main circuit. The contact of AC contactor is made of silver tungsten alloy, which has good conductivity and high temperature ablation resistance. The power of AC contactor action comes from the magnetic field generated by AC through the coil with iron core. The electromagnet core is composed of two "mountain" shaped young silicon steel sheets. One of the fixed iron core is sleeved with coil, and the working voltage can be selected. In order to stabilize the magnetic force, a short-circuit ring is added to the suction surface of the iron core. After the AC contactor loses power, it returns by spring. The other half is a movable iron core, whose structure is the same as that of a fixed iron core, which is used to drive the closing and breaking of the main contact and auxiliary contact.
