MR 128 Specifications: Input size: 10mm Final product size: 325-1500mesh Main motor: D97kw Capacity: 1-6.5t/h Total weight: 26.5ton Power: 225kw Dimension: 13*5*8m Main features: 1.Wide range of processing materials, so far, it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic 2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders 3.It is easy to maintain, service, replace, repair the vulnerable parts, the time of repair is just half day 4.The Power consumption is low while the produce is high, pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole processing, and Quieter room is equipped to reduce the noise pollution 5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro powder The application scope: 1.chemical engineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on, All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6 2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of trees 3.Can feed fully with powder such as coal fly ash.
HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motor kw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 First produced in the country80-400 meshes Power consumption reduced by over 30 percent. The rival for the hard material The HDB German grinder breaks through the limit that the ordinary grinder can only mill the materials of Mohs hardness 7 or less, and can grind the materials with Mohs hardness 6-9, and the foundation is simple, the vibration is small, and the power consumption is low Technical structure features 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on.
1 Thickness: 0.2-1.4mm 2 Width: 600-1400mm 3 Standard: JIS G3312,Inner diameter: 508mm&610mm, Coil Weight: 3-8T 4 Steel Grade: CGCC, DX51D 5 Plate: hot dipped galvanized plate or cold rolled steel plate 6 Categories of paint: polyester, silicon modified polyester(SMP), Fluor polymer paint&PVDF 7 Painting thickness: 25+/-5 microns on top side and 7+/-2 microns on back side 8 Color: white, red, blue or customized as per RAL color card. 9 Packing: Standard export packing, 4 eye bands and 4 circumferential bands in steel, galvanized metal fluted rings on inner and outer edges, galvanized metal and waterproof paper wall protection disk, galvanized metal and waterproof paper around circumference and bore protection. 10 With or without protective film on the top side of color coated sheet or coil. 11 Applications: buildings, vehicles, ships, mechanical and electrical equipment and electrical household appliance 12 Cutting and slitting can be requested as customer's designation Linyi Qichen Metallic Material Co., Ltd. is a professional factory of color coated steel coil , pre-painted steel coil ,pre-coated metal ,PVC coated steel roll ,embossed door panel ,etc. We have fifteen years experience in this field with more than 80 employees. Our company is equipped with international advanced level color coating production lines to produce Color coated steel coil 160 thousand tons per year. Therefore, we can easily meet your requirements. Thanks to our powerful distribution network, our products are popular with customers in many countries in the world, and are favorably appraised by clients. We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients. To learn more about what we can do for you, contact us at any time. We look forward to establishing a good and long-term business relationship with you. -
LM900 specifications: Grinding diameter: 900 Production: 1-10t/h Input size: less than or equal to 10 mm Moisture: less than or equal to 6% Final product size: 80-1500 mesh Main unit power: 132kw LM900 features: 1. High level of automation: the equipment adopts PLC control system to uniformly control. The system is safe, sensitive and reliable. 2. Excellent powder quality. It adopts superfine pulverizing and material layer grinding principles, the powder solubility is excellent, the dispersibility is good and the iron content is low. 3. High grading accuracy: adopt horizontal type multi-turbine variable frequency grader. Each rotor can be changed by variable frequency in speed and does not need the secondary air selection grading and can be arbitrarily adjusted within 80-1500 mesh. 4.Convenient maintenance: the main engine reducer, grinding wheel and hydraulic cylinder each has a corresponding external hudrodynamic lubrication station to reduce the maintenance work and production delay and breakdown loss. 5. Reliable sealing: the system works under negative pressure. There is no flying dust and the workshop is clean and environmental. 6. Long service life of the quick-wear part: the surface of the grinding wheel and grinding ring adopts high-quality wear-resistant materials with long service life and small erosion. 7. Environmental protection: small vibration, low noise, excellent integral sealing and no flying dust. -
HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motorï¼kw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 Technical structure features 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on
Okuma makaira machined aluminum spinning reels were designed using okuma's 4d concept process and feature a machine-cut stainless steel main gear and forged machine-cut body, sideplates, and rotor. With 23 oil-retaining o-rings and gaskets, and sealed internal mechanisms, these spinning reels are protected from the harsh elements brought on by saltwater. Perfect for targeting big gamefish such as trevally, yellowtail, bluefin tuna, marlin, and even large sharks, okuma makaira machined aluminum spinning reels can handle nearly any situation with comfort and ease. Forged aluminum, machine-cut body and sideplate Forged aluminum, machine-cut cyclonc flow rotor Forged stainless steel main gear for ultimate power and strength Precision machine-cut 17-4 grade stainless steel pinion gear Oversized 17-4 grade stainless steel spool shaft reduces flex Hydro sealed body and dfd system for maximum protection Carbonite high output drag with calâ??s drag grease on full dfd Customized pre-set drag system, works like a lever drag reel Corrosion-resistant stainless steel bearings Dual anti-reverse system for maximum strength and reliability Quick-set stainless steel german anti-reverse roller bearing Crc: corrosion resistant coating process Machined aluminum, 2-tone anodized spool with lcs lip Machined aluminum screw-in handle arm for added strength Heavy-duty, solid aluminum bail wire with manual trip function Rotor brake system works in conjunction with manual bail trip Machined aluminum handle knob Manufacturer's 5-year limited warranty Please note: these reels feature fixed right or left hand retrieves, and are not interchangeable. Must choose r model for right or l model for left.
Okuma makaira machined aluminum spinning reels were designed using okuma's 4d concept process and feature a machine-cut stainless steel main gear and forged machine-cut body, sideplates, and rotor. With 23 oil-retaining o-rings and gaskets, and sealed internal mechanisms, these spinning reels are protected from the harsh elements brought on by saltwater. Perfect for targeting big gamefish such as trevally, yellowtail, bluefin tuna, marlin, and even large sharks, okuma makaira machined aluminum spinning reels can handle nearly any situation with comfort and ease. Forged aluminum, machine-cut body and sideplate Forged aluminum, machine-cut cyclonc flow rotor Forged stainless steel main gear for ultimate power and strength Precision machine-cut 17-4 grade stainless steel pinion gear Oversized 17-4 grade stainless steel spool shaft reduces flex Hydro sealed body and dfd system for maximum protection Carbonite high output drag with cal, s drag grease on full dfd Customized pre-set drag system, works like a lever drag reel Corrosion-resistant stainless steel bearings Dual anti-reverse system for maximum strength and reliability Quick-set stainless steel german anti-reverse roller bearing Crc: corrosion resistant coating process Machined aluminum, 2-tone anodized spool with lcs lip Machined aluminum screw-in handle arm for added strength Heavy-duty, solid aluminum bail wire with manual trip function Rotor brake system works in conjunction with manual bail trip Machined aluminum handle knob Manufacturer's 5-year limited warranty Please note: these reels feature fixed right or left hand retrieves, and are not interchangeable. Must choose r model for right or l model for left.
The ricoh gen4 greyscale printhead is suitable for a range of water, solvent and uv printers. This printhead has an integrated heater and thermistor. This is ricoh original printhead and it is covered by a manufacturer warranty. This ricoh gen4 is available in two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet. Technical specifications - size: 63 x 63 x 16, 2 mm (excluding cables) - head materials: sst, ni and epoxy adhesive - nozzle plate surface: non-coated sst - number of nozzles: 2 x 192 nozzles - nozzle spacing: 0, 1693 mm - piezo type: d33 stacked pzt - temperature control: integrated heater and thermistor - operator temperature range: up to 60â° c - native drop volume: 7 pl - drop volume range: 5-25 pl with greyscale - jetting frequency: up to 30 khz - life: 100 billion actuations per nozzle Printer compatible Agfa Jeti 1224 uv hdc ftr Jeti 3020 uv titan ftr Ampla digital Targa tx Atp color Dfp1320 g4 Dfp1000 g4 Dfp740 g4 Digitex Gunsjet sf-1914 Gunsjet sr-1808 Gunsjet sr-2508 Gunsjet sr-3208 Gunsjet uf4547 Durst Omega 1 Omega 2 Dyss Apollo gf2616-08f Apollo gf2616-10ffw Apollo gf2616-10frw Apollo gf2616-12f Apollo gf2616-12s Apollo gf2616-14sfw Apollo gf2616-14srw Apollo gf2616-16f Apollo gf2616-16sfwfv Apollo gf2616-16srwrv Apollo gh1600-08f Apollo gh1600-08sf Apollo gh1600-08sr Apollo gh1600-10fm Apollo gh1600-12s Apollo gh1600-12sfwfv Apollo gh2200-08f Apollo gh2200-08sf Apollo gh2200-08sr Apollo gh2200-10fm Apollo gh2200-12s Apollo gh2200-16sfwfv Apollo gh2600-08f Apollo gh2600-08sf Apollo gh2600-08sr Apollo gh2600-10fm Apollo gh2600-12s Apollo gh2600-12sfwfv Gandy digital Domin8tor Pred8tor
The HDB German grinder breaks through the limit that the ordinary grinder can only mill the materials of Mohs hardness 7 or less, and can grind the materials with Mohs hardness 6-9, and the foundation is simple, the vibration is small, and the power consumption is low HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motorkw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 Technical structure features: 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on
The application scope: 1.chemicalengineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on, All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6 2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of trees 3.Can feed fully with powder such as coal fly ash. MR100 Specifications: Input size: 10mm Final product size: 325-1500mesh Main motor: D97 kw Capacity: 0.5-3.2 t/h Total weight: 15ton Power: 120 kw Dimension: 10*5*8m Main features: 1.Wide range of processing materials, so far, it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic 2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders 3.It is easy to maintain, service, replace, repair the vulnerableparts, the time of repair is just half day 4.The Power consumption is low while the produce is high, pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole processing, and Quieterroom is equipped to reduce the noise pollution 5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro powder
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. Model No.: BLMT-25/95-13 Cross section range: 25-95 Bolt: M13
Description: blmt shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, acsr and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kv. Installation description: no need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command.
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. BLMT-185/400-17 Cross section range: 185-400 Diameter of mounting hole: 17 Bolt: M22
Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Kiln cylinder is a heated revolving part which is welding by high quality carbon steel plate. Cylinder is supported on the supporting device by tyres. And there is machanical or hydraulic pressure catch-wheel on one or several gears in order to control the turning of cylinder. By the gear rings in the middle of cylinder, gears drive the Cylinder to rotating with the speed under technical design requirement. Because of the need of installation or maintenance, the big size rotary kiln has auxiliary gears, which make cylinder rotates at low speed. In order to prevent cold air comes into cylinder and the leaking of gas and dust, the reliable kiln tail and head sealing equipment are installed on the feeding and discharging end. Application: Rotary Kiln is thermal equipment which takes heating treatment to lump, bulk and slurry materials. It can be widely used in different industries such as cement & construction, non-ferrous metals, ferrous metals, refractory materials, industrial chemicals, paper making and etc. Features & Advantages: Supporting Device adopts advanced main shaft structure, automatic temperature measuring device and electrical heating device. Catch-wheel mechanical wheel or hydraulic thrust wheel. Hydraulic thrust wheel is equipped with advanced hydraulic controlling system. Gears single driving or twin driving. Rotating speed is under control of adjustable-speed motor, DC motor, or frequency adjustable-speed motor. Reliable operation, energy-saving and high efficiency. Liners for tyres of cylinder fixed type, adjustable type, or floating type Simple structure, convenient replacement and maintenance without any damage to cylinder Sealing Device variety types are available in accordance to different design of rotary kiln; Such as air cylinder edge sealing, spring edge sealing, graphite block sealing and etc.
Coal dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.The dryer can use coal, gas, electricity, oil and wind power to heat the dryer machine. Our products advantages of coal dryer: 1. High drying efficiency, big capacity, high running rate 2. Compact structure, operation stable, easy maintenance Coal rotary dryer is mainly compose of driving device, supporting roller, thrust roller, cylinder, kiln inlet, kiln outlet and sealing device. 1. 2-3 supporting points can guarantee the contacting surface between supporting roller and tyre is paralleled with axis line of cylinder during installation. 2. Supporting device is antifriction bearing (occasionally uses slide bearing). This design has simplified the supporting device of supporting roller, and reduced the useless power loss during operation. It has the features like easy operation and maintenance. 3. Suitable shim between tire and shell will ensure the tire ring on the shell tightly to increase the shell strength. 4. The main driving system uses new type ac variable frequency technology. Compared with electromagnetic speed control and dc speed control, that can save energy, have large range & high precision of speed regulation, high efficiency and running smoothly. Radial direction contacting type sealing device is adopted at kiln inlet and outlet. They are perfect suitable for dimension tolerance of cylinder and skewing movement of cylinder. This sealing deviceâ??s feature is good performance, longer working life and easy for replacement.
Cement rotary dryer is suitable to dry metallic and nonmetallic minerals, clay in cement industry and coal in coal mine, etc. Characteristics of cement rotary dryer include high drying capacity, smooth rotation, low energy consumption and easy operation. Our products advantages: 1. Shell adopts assembly structure and its precision has been improved a lot, which will be more convenient for transport. 2. According to different fuel properties, suitable raising plate will be adopted, which can make material get more heat exchange. 3. Sealing is simple but efficient, which can improve capacity and improve whole machine performance. 4. Its matching combustion furnace is energy-saving type, which take small area and is easy to adjust. Cement rotary dryer is mainly compose of driving device, supporting roller, thrust roller, cylinder, kiln inlet, kiln outlet and sealing device. 1. 2-3 supporting points can guarantee the contacting surface between supporting roller and tyre is paralleled with axis line of cylinder during installation. 2. Supporting device is antifriction bearing (occasionally uses slide bearing). This design has simplified the supporting device of supporting roller, and reduced the useless power loss during operation. It has the features like easy operation and maintenance. 3. Suitable shim between tire and shell will ensure the tire ring on the shell tightly to increase the shell strength. 4. The main driving system uses new type AC variable frequency technology. Compared with electromagnetic speed control and DC speed control, that can save energy, have large range & high precision of speed regulation, high efficiency and running smoothly. 5. Radial direction contacting type sealing device is adopted at kiln inlet and outlet. They are perfect suitable for dimension tolerance of cylinder and skewing movement of cylinder. This sealing deviceâ??s feature is good performance, longer working life and easy for replacement.
Sand Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier. Sand Rotary dryer special features as follows: 1. Sand dryer is made of wear-resistant manganese plate, 3-4 times wear-resistant than ordinary steel plate. Raw material is with moisture within 15%, and moisture of dried material is lower 0.5-1%. Compared to traditional single cylinder drying machine, its thermal efficiency can be improved about 40% or more. 2. The outside cylinder temperature is lower than 60 degrees, and the waste gas temperature is lower than 120 degrees, and the service life of dust collector bag is more than twice of that of other collector. Coal consumption is one-third of the single cylinder dryer, save electricity 40%, with per ton consumption of standard coal lower than 9 kg. The sand dryer mainly consists of rotor, shed plate, transmission device, support device, seal ring, and other spare parts. The rotary dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.
Cationic surface sizing agent ( compete with bk532) The main data: Product name: cationic surface sizing agent (sae based) Appearance: milk white to light brown liquid The main description: Cationic surface sizing agent is a new type of surface sizing agent that synthesized by the copolymerization of styrene and ester. It can efficiently combinate with starch and lead to good cross link intensity and hydrophobic properties.With lower dosage, lower cost and easy use advantages, it has good film-forming property which can significantly improve the water-resistance and ring-crush strength of board paper and corrugated paper.No curing period.Completely replace the usage of internal sizing agent. The main application: Its correspondence product name is bk532.Based on large quantity application experience in varies paper mills, we improve the recipe day by day, finally quality is the top grade in the market.It can be used with starch to reduce sizing cost.It also has good mechanical stability with less bubbles generated during the operational process.After finish the starch cooking, keep the temperature at about 70-75, add in this product based on 1-2kg per ton paper(actual dosage should be depend on practice), use alum to adjust the ph to be 3.5-4.0, then metering in size press. Packing & storage: Packing: 200kgs pp drum or 1000kgs ibc drum Storage: store in a cool, dry place. When loading and unloading, you should take care to prevent packaging and containers being damaged, avoiding leakage. Quality standard: Item Standard specification Appearance Milk white to light brown liquid Ionic Cationic Solid content 30%min Ph 5max Viscosity(25).Cps 30max Shelf life 6-12months
Anionic surface sizing agent (styrene acrylic based) The main data: Product name: anionic surface sizing agent (sae based) Appearance: white to light brown liquid The main description: Anionic surface sizing agent is a new type of surface sizing agent that synthesized by the copolymerization of styrene and ester.It can efficiently combinate with starch result good cross link intensity and hydrophobic properties.With lower dosage, lower cost and easy use advantages, it has good film-forming property which can significantly improve the water-resistance and ring-crush strength of culture paper such as offset printing paper and electro-photographic paper.Our quality can compete with basf 400ds and basf8903/8906. The main application: It can be applied in combination with anionic and nonionic auxiliaries such as starch, direct dyes, acid dyes and fluorescent whitening agents, etc.The paper does not necess arily have to be sized at the wet end and before it is applied, but this can be an effectiv e means of controlling the extent to which the size is able to penetrate. No curing period, completely replace the usage of internal sizing agent.It can be used with starch to reduce sizing cost.It also has good mechanical stability with less bubbles generated during the operational process.Application temperature should be less than 75 Packing & storage: Packing: 200kgs pp drum or 1000kgs ibc drum Storage: store in a cool, dry place. When loading and unloading, you should take care to prevent packaging and containers being damaged, avoiding leakage. Quality standard: Item Standard specification Appearance White to light brown liquid Ionic Anionic Solid content 25%min Ph 2-4 Viscosity(25).Cps 50max Shelf life 6-12months
Sand Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier. Sand Rotary dryer special features as follows: 1. Sand dryer is made of wear-resistant manganese plate, 3-4 times wear-resistant than ordinary steel plate. Raw material is with moisture within 15%, and moisture of dried material is lower 0.5-1%. Compared to traditional single cylinder drying machine, its thermal efficiency can be improved about 40% or more. 2. The outside cylinder temperature is lower than 60 degrees, and the waste gas temperature is lower than 120 degrees, and the service life of dust collector bag is more than twice of that of other collector. Coal consumption is one-third of the single cylinder dryer, save electricity 40%, with per ton consumption of standard coal lower than 9 kg. The sand dryer mainly consists of rotor, shed plate, transmission device, support device, seal ring, and other spare parts. The rotary dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.
