Ethanol, Methanol, Phosphoric Acid, Sodium Chloride, Butanol, Sodium Toluene Sulphonate, Ammonia, Phenol, Acetic Acid, Vegetable Glycerol, Fatty Acids, Soap Noodles, Talc Powder, Calcium Carbonate, Phosphate, Polymers, Pigments, Epoxy Resins, Fumed Silica, Sodium Lauryl Ether Sulphate, Labsa, Enzyme ( Leather Processing), Sodium Silicate, Polyols, Kaolin, Epoxy Hardeners, Fertilizers, Flexible Modifier, Sulfur, Formaldehyde, Phenolic Resins (novolak Rock Wool Resins Brake Lining Resins), Foundry Resins (phenol Formaldehyde Resins Shalco Resins Furan Resins), Formaldehyde Resins (formaldehyde 37% Form Urea( 80 85%) Urea Formaldehyde (glue) ), Phenol Molding Powder, White Spirit, Light Soft Wax, Slack Wax, Hadrotreated Microcrystalline Wax (slabs), Paraffin Wax, Sludge Removal, Fragrances, Concentrates, Absolute, And Essential Oils.
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made of coke, steel chips, quartz (or silica) as raw materials and smelted from an electric furnace. Ferrosilicon is often used as a deoxidizer in steelmaking, and it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in alloy production and chemical industry, commonly used as a reducing agent
Elemental magnesium is a gray-white lightweight metal, two-thirds the density of aluminium. Magnesium has the lowest melting (923 K (650 C)) and the lowest boiling point 1,363 K (1,090 C) of all the alkaline earth metals. Mg ingot is a new type of lightweight corrosion-resistant metal material, mainly used in mg alloy production, aluminum alloy production, steelmaking desulfurization, aviation and military industry and other fields. In 2022, our Industrial Park Mg production was 510,000 tons, accounting for 50% of the world's production.
It is the only type of Urea that meets the ISO 22241 specification (Uncoated, Aldehyde, heavy metals free) and the only suitable Urea for the production of AdBlue®/AUS32/ARLA32 solutions. For meeting the ISO 22241 the Urea needs to be of highest purity/quality. Automotive grade urea dissolved within deionized water is resulting in an aqueous urea solution, supporting the reduction of mono-nitrogen oxides exhaust emissions by injection into selective catalytic reduction systems of heavy duty engines. This aqueous urea solution is standardized as AUS 32 in ISO 22241 and consequently the technical specifications for automotive grade urea are derived from this standard. Urea Assay (wt %) 98.0 min 99.1 Granulate size 0.85-2.80mm 91% Moisture (wt %) 0.5 max 0.3 Nitrogen(wt %) 46 46.4 Biuret (wt %) 1.0 max 0.65 Aldehydes (ppm) 5 max 4 Free Ammonium (wt %) 0.01 0.01 Insolubles (ppm) 20 13 Fe (mg/kg) 0.5 max Less than 0.2 Al (mg/kg) 0.5max Less than 0.2 Cu (mg/kg) 0.5 max Less than 0.2 Zn (mg/kg) 0.5 max Less than 0.2 Cr (mg/kg) 0.5 max Less than 0.2 Ni (mg/kg) 0.5 max Less than 0.2 Mg (mg/kg) 0.5 max Less than 0.2 Na (mg/kg) 0.5max Less than 0.2 K (mg/kg) 0.5 max Less than 0.2 Ash (ppm) 100 max. Less than 10 Phosphate(ppm) 0.5 max Less than 0.2 Heavy Metal( ppm) 0.5 0.3 Additive NONE NONE
AdBlue liquid solution is made up of 32.5% urea and 67.5% de-ionised water. You may be wondering, where does the urea in AdBlue ic ammonia and carbon dioxide. The urea is then added to the de-ionised water to create AdBlue. This guarantees quality in accordance with very strict specifications contained in ISO 22241. AdBlue is a diesel exhaust fluid used in vehicles with Selective Catalytic Reduction (SCR) technology to reduce harmful gases being released into the atmosphere. AdBlue is a 32,5 % solution of high-purity, synthetically manufactured urea in de-mineralized water. It is a safe-to-use fluid. Parameter Minimum Maximum Unit Appearance Colourless Liquid with slight ammonia odour   Freezing point -11°C -11°C °C Boiling point 100°C 100°C °C Basicity 9 10 pH Flash point not applicable (non-flammable)   Water solubility 100  g/l Viscosity at 20°C 1.4 1.4 mPa.s Urea Content 31.8 33.2 % Density at 20°C 1.087 1.093 g/cm3 Refracting index at 20°C 1.3814 1.3843  Alkalinity as NH3  0.2 % Biuret  0.3 % Insolubles 20 mg/kg  20 mg/kg Calcium  0.5 mg/kg Iron  0.5 mg/kg Aluminium  0.5 mg/kg Magnesium  0.5 mg/kg Sodium  0.5 mg/kg Potassium  0.5 mg/kg Copper  0.2 mg/kg Zinc  0.2 mg/kg Chromium  0.2 mg/kg Nickel  0.2 mg/kg
Polypropylene is a polymer whose monomer is propylene (an organic hydrocarbon with the chemical formula C3H6). The chemical formula of polypropylene is (C3H6)n. This polymer is also known as polypropene and is often denoted by the abbreviation PP. Generally, polypropylene is produced via a chain-growth polymerization reaction involving propylene. Toughness and flexibility (exhibited to a large extent especially when the polymerization process involves copolymerization with ethylene). Large thermal expansion. Resistant to organic solvents. Resistant to weak oxidizing agents. Soluble in some organic nonpolar solvents like xylene.
Caustic soda is an alkali salt which is also called Lye. It is the common name of sodium hydroxide. This name is given due to the corrosive nature of this salt on animal and plant tissues. It's a highly caustic base and the alkali that decomposes proteins at ordinary ambient temperatures and can severely burn chemical burns. It readily absorbs carbon dioxide and moisture from the air and is highly soluble in water. It creates a series of hydrates NaOH·nH2O. One of the strongest alkalis is a white solid, with no pronounced odor. The size of the flakes can reach 0.5 mm. NaOH easily dissolves in water and absorbs moisture from the air with the release of a large amount of heat. It has a wide range of applications. The chemical formula of sodium hydroxide is NaOH. Caustic soda it is often use in in the manufacturing of petroleum products and manufacturing of pulp and paper.
YETD-MC has a production line of 400,000 tons of synthetic ammonia and 600,000 tons of urea. High-quality raw coal is used as raw material to ensure product quality. The recycling project also provides about 80,000 tons of ammonium sulfate, which in turn is an important raw material for 100,000 tons of compound fertilizer. We can provide ammonium sulfate (N20.5%), urea (N46%), various types of compound fertilizers (N+P+K=57% MAX). Urea, also called carbamide, the diamide of carbonic acid. Its formula is H2NCONH2. Urea has important uses as a fertilizer and feed supplement, as well as a starting material for the manufacture of plastics and drugs. It is a colorless, crystalline substance that melts at 132.7° C (271° F) and decomposes before boiling. Because its nitrogen content is high and is readily converted to ammonia in the soil, urea is one of the most concentrated nitrogenous fertilizers. An inexpensive compound, it is incorporated in mixed fertilizers as well as being applied alone to the soil or sprayed on foliage. With formaldehyde it gives methylene??urea fertilizers, which release nitrogen slowly, continuously, and uniformly, a full year??s supply being applied at one time. Standard: GB/2440-2017 Model Nitrogen Biuret Moisture Size(d0.85-2.8mm) Urea-A 46.4% 0.9% 0.5% 93% Urea-B 45.0% 1.5% 1.0% 90% Appearance Granular, No mechanical impurities"
In order to acquire high quality of RBD Palm Olein, there is the process of physical refining that removes smells and collaboration to produce Refined Bleached Deodorized PalmOil, or RBDPO and free sheer fatty acids, which are used as important raw material in the manufacture of soaps, washing powder and other hygiene and personal care products. RBDPO is the basic oil product sold in the worldâ??s commodity markets, although many companies fractionate it further into palm olein for use as cooking oil or other products. Splitting of oils and fats by hydrolysis or under basic conditions, saponification yields fatty acids, with glycerine (glycerol) as a by-product. The split of fatty acids is mixture ranging from RBD C4 to C18, depending on the type of oil/fat. Therefore, PGN only serves the best quality of palm oil that fulfils worldâ??s needs as RBD CP6 and CP10. P r o d u c t S pec i f i c a t i o n - R B D P A L M O L E IN FREE FATTY ACID Melting POINT (0C) 0.1 Max (As Palmitic) 24 Degree Celsius MOISTURE & IMPURITIES CLOUD POINTS (OC) 0.1 Max CP 8 - 10 IODINE VALUE (Wijis) COLOUR (5-1/4") LOVIBOND CELL 56 - 60 Min 3R Max 30Y Max
A4 copy papers, energy drinks, nuts, fish products, sea food, fresh table eggs, confectioneries, king crabs, frozen products, frozen chicken, hides, oil products, refined sun flower oil, soybeans oil, seeds, spices, sugar, wax product, wooden products, charcoal, wood pellets, timber.Transportation
Petroleum jelly, petrolatum, white petrolatum, soft paraffin/paraffin wax or multi-hydrocarbon is a semi-solid mixture of hydrocarbons. It is used as: Medical treatment, Skin and hair care, Preventing moisture loss, Skin lubrication, Coating, Industrial production processes, Lubrication, and so on. Petroleum jelly Industrial Grade is used to moisten plasticine, coat corrosion-prone items, condition leather, finish wood, in protect and prevent moisture loss, as a release agent for plaster molds and castings , rubber, automotive, and general industrial sectors too. Peak Universal General Trading Llc, can provide you different range of industrial Vaseline based on your need and different analysis. A wide range of industrial Vaseline can be produced by adjusting oil contents, color and so on. In addition industry has large quantity request for Vaseline these days. We pack Petroleum jelly industrial grade in new or second hand 180 kg drums , ISO tank , flexi tanks.
Features:- Notebook 58 gsm (18x24) MOQ :- 1x20ft container Pages :- 72, 100, 172, 36, 120 ,152, 84, 96 Notebook 58 gsm (21*29) Pages :- 48, 54, 60, 66, 80, 84, 96,132,168 MOQ :- 1*20ft container Packing details :- Standard / Customize Incoterm :- FOB Payment Terms:- 70% advance & 30% LC on BL
Product DetailS Description: ITF2 8mm R4.1 feeder for Philips/Assembleon FCM FCM2 AX3 AX5 SMT machine Hot sale all size Assembleon /Philips feeders for ACM, AQ-1, AX-3, AX-5, D-9, FCMII (FCM2) and GEM-Xi series machine: TTF 8mm Twin Tape Feeder PA2657/00| PA2657/05 ITF2 8mm feeder PA2654/00| PA2654/05| PA2654/06| PA2654/08 ITF2 12mm feeder PA2654/10| PA2654/15| PA2654/16| PA2654/18 ITF2 16mm feeder PA2654/20| PA2654/25| PA2654/26| PA2654/28 ITF2 24mm feeder PA2654/30| PA2654/35| PA2654/36| PA2654/38 ITF2 32mm feeder PA2654/40| PA2654/45| PA2654/46| PA2654/48 ITF2 44mm feeder PA2654/50| PA2654/55| PA2654/56| PA2654/58 ITF2 56mm feeder PA2654/60| PA2654/65| PA2654/66| PA2654/68 GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on We have large quantity stock and good source for Feeders/ feeder spare parts, feeder trolleys, Nozzles, Heads, Servo Motors, Drivers, Control boards and other related parts for Siemens/ASM/SIPLACE X-Series machine(such as: X4i S, X4 S, X3 S, X2 S,ect. ), KME CM402/ CM602/ NPM/ AM machine, FUJI NXT M3/M3S/M6/M6S/AIMEX series machine, YAMAHA YS/YG/YV series machine, JUKI KE2000/FX series machine, Universal Advantis/Genesis/GSM series machine, etc.
Product DetailS Description: ITF2 8mm R4.1 feeder for Philips/Assembleon FCM FCM2 AX3 AX5 SMT machine Hot sale all size Assembleon /Philips feeders for ACM, AQ-1, AX-3, AX-5, D-9, FCMII (FCM2) and GEM-Xi series machine: TTF 8mm Twin Tape Feeder PA2657/00| PA2657/05 ITF2 8mm feeder PA2654/00| PA2654/05| PA2654/06| PA2654/08 ITF2 12mm feeder PA2654/10| PA2654/15| PA2654/16| PA2654/18 ITF2 16mm feeder PA2654/20| PA2654/25| PA2654/26| PA2654/28 ITF2 24mm feeder PA2654/30| PA2654/35| PA2654/36| PA2654/38 ITF2 32mm feeder PA2654/40| PA2654/45| PA2654/46| PA2654/48 ITF2 44mm feeder PA2654/50| PA2654/55| PA2654/56| PA2654/58 ITF2 56mm feeder PA2654/60| PA2654/65| PA2654/66| PA2654/68 GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on We have large quantity stock and good source for Feeders/ feeder spare parts, feeder trolleys, Nozzles, Heads, Servo Motors, Drivers, Control boards and other related parts for Siemens/ASM/SIPLACE X-Series machine(such as: X4i S, X4 S, X3 S, X2 S,ect. ), KME CM402/ CM602/ NPM/ AM machine, FUJI NXT M3/M3S/M6/M6S/AIMEX series machine, YAMAHA YS/YG/YV series machine, JUKI KE2000/FX series machine, Universal Advantis/Genesis/GSM series machine, etc.
Half Automatic Flat T bar roll forming machine is the machine to make ceiling T bar by roll forming principle. Half automatic machine means that you need to punch the holes and ends of the flat T bar. Same as other T bar, flat t bar also has main T and cross T two types. Normally the T bar sizes 32x24x3600mm; 38x24x3600mm 38x35x3600mm; 32x15x3600mm etc. Simple and brief introduction of half automatic T bar roll forming machine: NO.ItemBrief introduction 1Frame tableMaterial: Carbon Steel, Thickness: 20mm, Polished, Anti-rusting processing 2RollerMaterial Cr12 Inner diameter 40mm, Min OD 90mm, Hardness HRC 55-56, Symmetry in the range of 0.05mm, 16 roller stations 3TransmissionChain Drive or Gear 4StitchFour Rollers real stitch can also be used for fake stitch. 5Side PlateThickness 30mm, Polish 6 sides, high precision boring 6Principal axis45# steel, tempering heat treatment, mill grinder precise making 7Electronic control systemPLC programmed, Touch Screen, full automatic controlling system. 8Stamping MouldsMaterial D2, Hardness HRC 58-60, Precise milled, precise making, easy to removable parts. Advantages of Zhongtuo Half Automatic Flat T bar roll forming machine: Full automatic production to make the T gird shape. For the finished ending making and punching hole, needs another punching machine. Machine working speed is around 25meter per minutes and speed is adjustable. Hydraulic punching for anti slip holes and the company logo if you need. Hydraulic shearing and servo flying system. The product punching die and cutting off blade, we use SKD11 as material, long time to use. PLC control system, Human-Machine interface, portable and touch screen. The brand of PLC is Panasonic.
Chemicals like caustic soda flakes / prills (naoh), caustic soda lye, potassium carbonate granular (k2co3), potassium carbonate powder, hydrogen peroxide (h2o2), phosphoric acid (h3po4), caustic potash lye, caustic potash flakes (koh), methylene chloride (ch2ci2), methyl chloride (ch3ci), hydrochloric acid (hci), liquid chlorine (ci2), sodium hypochlorite (naoci), aluminium chloride, poly aluminium chloride, chlorinated paraffin wax, hydrogen gas, benzyl chloride, ) benzyldehyde, soda ash light, cyclohexanone, cyclohexane.
Caustic Soda Flakes, Caustic Soda Pearls , Sodium Sulphate, Speckles, Soda Ash Dense, Soda Ash Light, Calcium Chloride, Sodium Bi Carbonate, , Xanthan Gum Industrial Grade, Xanthan Gum Food Grade, Citric Acid Industrial Grade, Citric Acid Food Grade, Hydrogen Peroxide, Paraffin Wax, Ammonium Sulphate, Potassium Chloride, Caustic Soda Liquid, Titanium Dioxide, Bitumen, Furnace Oil , Grease, Sulfur Granules And Labsa.
Salt, phosphate rocks, silica sand, talc powder, hydrogen peroxide, sulfuric acid, nitric acid, hcl, urea, triple super phosphate (tsp), single super phosphate (ssp), di ammonium phosphate (dap), paraffin wax, ethanol, molasses, cms, zirconium silicate, lime, calcium carbonate, sulfur, labsa, silica fume, poly acrylates (homo & copolymer), butadine, chlorine gas.Export
Soy candles, decorative candles, paraffin candles, wedding candles, scented candles, perfumed candles, ceramic vases, ceramic trays, resin material, soy wax, cotton wick, wooden wick, terrazzo material, resin material, trays, coasters, diffusers, scented candles, pure rose essential oils, mogra essential oils, oudh fragrance oil, musk fragrance oil..
Product Name: Refined Glycerin CAS NO.: 56-81-5 MF: C3H8O3 Technical Index: Product Character: Colorless Transparent Liquid Color (APHA): 20 max Glycerin Content (%): 99.5% min Specific Gravity: 1.2607 min Moisture: 0.5 max Fatty Acid & Ester (ml): 1.0 max Chloride: 0.001 max Sulphates (%): 0.002 max Heavy Metal (Pb): 0.0005 max Ash (%): 0.01max
