Organic fine chemicals are used as raw materials in the cosmetics industry to produce a wide range of personal care products, including skin care, hair care, and makeup products. These chemicals are usually small, high-value molecules that are synthesized from a variety of raw materials, including petrochemicals, renewable feedstocks, and natural products. They are used as intermediates in the synthesis of a variety of cosmetic ingredients, such as emollients, emulsifiers, fragrances, and preservatives. Some examples of organic fine chemicals that are used as raw materials in the cosmetics industry include: Emollients: These are chemicals that are used to soften and moisturize the skin. They can be derived from a variety of natural and synthetic sources, including plant oils, animal fats, and petrochemicals. Emulsifiers: These are chemicals that are used to stabilize mixtures of oil and water in cosmetics products. They can be derived from a variety of natural and synthetic sources, including plant-based materials, such as lecithin, and synthetic polymers, such as polyethylene glycol. Fragrances: These are chemicals that are used to add scent to cosmetics products. They can be derived from a variety of natural and synthetic sources, including essential oils, aroma chemicals, and synthetic fragrances. Preservatives: These are chemicals that are used to prevent the growth of microorganisms in cosmetics products. They can be derived from a variety of natural and synthetic sources, including plant extracts, such as tea tree oil, and synthetic chemicals, such as parabens.
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break foam already formed. In industrial processes, foams pose serious problems. They cause defects on surface coatings and prevent the efficient filling of containers. A variety of chemical formulae are available to prevent formation of foams. APPLICATION Pharmaceuticals Textile Industry Paints & coatings Paints & coatings Detergents Surfactants Paper and pulping industry Oil refining and crude oil Microbiological fermentation TECHNICAL PROPERTIES Anti-foaming agents Contain silicone oil and surfactants Reduce the formation of foam Control the generation of foam on surface of liquid Used in industrial processing liquids Low viscosity & surface active properties Affinity to the air-liquid surface
Description Peek (Polyether ether ketone) is a high-performance thermoplastic material that is known for its excellent mechanical, thermal, and chemical properties. Peek is often used in industrial applications where high temperature, chemical resistance, and mechanical strength are required. A peek seat is a component that is often used in valve applications. It is a seat made from peek material that is used to provide a tight seal between two components. A peek o-ring, on the other hand, is a type of o-ring made from peek material. O-rings are mechanical seals that are used to prevent the leakage of gases or liquids. Peek o-rings are known for their excellent chemical resistance, high-temperature resistance, and low friction coefficient. They are often used in applications where standard elastomeric o-rings would not be suitable due to their inferior properties. Sealing principle: The peek seat is a V-spring that is used as a force-applying element. The seal housing made of PTFE composite or peek has a good leak and crush resistance. As a seat seal ring, it is widely used in high-pressure valves, usually, the inner and outer seal rings of the seat are used together.
Methanol,Purity 99.85, Water 0.100 , Ethanol 0.0050 , Specific Gravity 0.7928 , Acetone 0.0030 , Permanganate Time 60 , Non Volatile Matter 8 , Distillation 1.0 , Color P Co 5 , Carbonizable 30 , Total Iron 0.10 , Chloride as Cl 0.5 , Appearance Clear and Free from Suspended Matter , Acidity 0.0030 , Sulphur 0.5 Methanol is used in production of formaldehyde Methyl, Metacrylate,Methyl Tertiary Butyl Ether (MTBE),DME, Acetic acid and ethylene and propylene For update of price and capacity please provide your last BL and business card along with LOI Procedure: 1- The buyer signs and stamps this offer and presents full documents 2- The buyer applies for the commission guarantee 5- The seller issues proforma 6- The buyer follow instruction for payment and shipment according to proforma Specification of Methanol Methanol Purity 99.85 Water 0.100 Ethanol 0.0050 Specific Gravity 0.7928 Acetone 0.0030 Permanganate Time 60 Non Volatile Matter 8 Distillation 1.0 Color P Co 5 Carbonizable 30 Total Iron 0.10 Chloride as Cl 0.5 Appearance Clear and Free from Suspended Matter Acidity 0.0030 Sulphur 0.5 Payment by LC at Sight, SBLC. ICPO and BCL
Colour Index No. 47005 E Number E 104 Food Colour Name Yellow 13 CAS No. 8004-92-0 Class Quino Phthalone Total Dye Content % (min) 70/78 Loss on Drying at 135 �°C & Sodium Chloride & Sulphates % (max) 30/22 Water Insoluble Matter % (max) 0.2 Ether Extracts % (max) 0.2 Subsidiary Dye % (max) 4.0 Dyes Intermediates % (max) 0.5 Unsulphonated Primary Aromatic Amines % (max) 0.01 Lead (Pb) ppm (max) 10.00 Arsenic (As) ppm (max) 1.00 Mercury (Hg) ppm (max) 1.00 Chromium (Cr) ppm (max) 5.0 Heavy Metal ppm (max) 40.00 Solubility at Room Temperature Water (gm/ltr) 150.00 Glycerine (gm/ltr) 40.00 Propylene Glycon ( gm/ltr) 40.00 Ethanol (95%) (gm/ltr) Trace Stability to Acids Excellent Neutral Excellent Alkaline Weak Baking 205 �°C (400 �°F) Better Light Best Heat Better
Colour Index No 19140 E Number E 102 FD C No Yellow 5 Food Colour Name Yellow 4 CAS No 1934210 Class Monoazo Pyrazolone Total Dye Content min 87 Loss on Drying at 135 C Sodium Chloride Sulphates max 13 Water Insoluble Matter max 02 Ether Extracts max 02 Subsidiary Dye max 10 Dyes Intermediates max 05 Unsulphonated Primary Aromatic Amines max 001 Lead Pb ppm max 1000 Arsenic As ppm max 100 Mercury Hg ppm max 100 Chromium Cr ppm max 50 Heavy Metal ppm max 4000 Solubility at Room Temperature Water gmltr 14000 Glycerine gmltr 15000 Propylene Glycon gmltr 5000 Ethanol 95 gmltr Trace Stability to Acids Excellent Neutral Excellent Alkaline Better Baking 205 C 400 F Best Light Excellent Heat Best
Colour Index No 15985 E Number E 110 FD C No Yellow 6 Food Colour Name Yellow 3 CAS No 2783940 Class Monoazo Total Dye Content min 87 Loss on Drying at 135 C Sodium Chloride Sulphates max 13 Water Insoluble Matter max 02 Ether Extracts max 02 Subsidiary Dye max 30 Dyes Intermediates max 05 Unsulphonated Primary Aromatic Amines max 001 Lead Pb ppm max 1000 Arsenic As ppm max 100 Mercury Hg ppm max 100 Chromium Cr ppm max 50 Heavy Metal ppm max 4000 Solubility at Room Temperature Water gmltr 12000 Glycerine gmltr 16000 Propylene Glycon gmltr 2000 Ethanol 95 gmltr Trace Stability to Acids Excellent Neutral Excellent Alkaline Better Baking 205 C 400 F Best Light Better Heat Best
Colour Index No 45430 E Number E 127 FD C No Red 3 Food Colour Name Red 14 CAS No 16423680 Class Xanthine Total Dye Content min 87 Loss on Drying at 135 C Sodium Chloride Sulphates max 13 Water Insoluble Matter max 02 Ether Extracts max 02 Subsidiary Dye max 40 Dyes Intermediates max 04 Unsulphonated Primary Aromatic Amines max 001 Lead Pb ppm max 1000 Arsenic As ppm max 100 Mercury Hg ppm max 100 Chromium Cr ppm max 50 Heavy Metal ppm max 4000 Solubility at Room Temperature Water gmltr 7000 Glycerine gmltr 2000 Propylene Glycon gmltr 5000 Ethanol 95 gmltr 1500 Stability to Acids Very Weak Neutral Excellent Alkaline Good Baking 205 C 400 F Good Light Better Heat Better
Colour Index No. - 16035 E Number - E 129 FD & C No. - Red 40 Food Colour Name - Red 17 CAS No. - 25956-17-6 Class - Monoazo Total Dye Content % (min) - 87 Loss on Drying at 135 �°C & Sodium Chloride & Sulphates % (max) - 13 Water Insoluble Matter % (max) - 0.2 Ether Extracts % (max) - 0.2 Subsidiary Dye % (max) - 3.0 Dyes Intermediates % (max) - 0.5 Unsulphonated Primary Aromatic Amines % (max) - 0.01 Lead (Pb) ppm (max) - 10.00 Arsenic (As) ppm (max) - 1.00 Mercury (Hg) ppm (max) - 1.00 Chromium (Cr) ppm (max) - 5.0 Heavy Metal ppm (max) - 40.00 Solubility at Room Temperature Water (gm/ltr) - 220.00 Glycerine (gm/ltr) - 30.00 Propylene Glycon ( gm/ltr) - 15.00 Ethanol (95%) (gm/ltr) - Trace Stability to Acids - Excellent Neutral - Excellent Alkaline - Better Baking 205 C (400 F) - Better Light - Best Heat - Best
Our Refined Sunflower Oil specification is as below; Product: Sunflower oil (RSFO). Type: Refined edible Standard: International standard. Quality: suitable for human consumption, free from foreign matter, any other oil or animal fats. Color: Yellow Light, clear and transparent. Odor: Neutral odor, no artificial additives. Visibility: No deposit and blur. Taste: Neutral, without artificial taste, without rancidity or strange or bad taste and smell. Physical and Chemical Analysis: Acidity (FFA): 0.3 maximum. Peroxide value (meq O2/kg): 10,0 maximum. Soap content (%): 0,005 maximum. Iodine value (WIJS): 118 - 141 Humidity and Volatile Matter (% at 105oC): 0.2 maximum. Saponification value (mg KOH/g oil): 188 - 194 Unsaponifiable (%): 1,5 maximum. Substances insoluble in ether (%): not more than 0,05. Refractive index (at 40oC): 1.461 - 1.468 Specific weight (at 20oC): 0.910 - 0.920 Saponified Substances: None. Phosphorus quantity: None. Antioxidants: None. Anti-foam: None. Anti-crystallization: None. Halphen Test: Negative. Mineral oil Test: Negative. Sesame oil Test: Negative. Cold test (after 24 hours): Negative.
Our Refined Sunflower Oil specification is as below; Product: Sunflower oil (RSFO). Type: Refined edible Standard: International standard. Quality: suitable for human consumption, free from foreign matter, any other oil or animal fats. Color: Yellow Light, clear and transparent. Odor: Neutral odor, no artificial additives. Visibility: No deposit and blur. Taste: Neutral, without artificial taste, without rancidity or strange or bad taste and smell. Physical and Chemical Analysis: Acidity (FFA): 0.3 maximum. Peroxide value (meq O2/kg): 10,0 maximum. Soap content (%): 0,005 maximum. Iodine value (WIJS): 118 - 141 Humidity and Volatile Matter (% at 105oC): 0.2 maximum. Saponification value (mg KOH/g oil): 188 - 194 Unsaponifiable (%): 1,5 maximum. Substances insoluble in ether (%): not more than 0,05. Refractive index (at 40oC): 1.461 - 1.468 Specific weight (at 20oC): 0.910 - 0.920 Saponified Substances: None. Phosphorus quantity: None. Antioxidants: None. Anti-foam: None. Anti-crystallization: None. Halphen Test: Negative. Mineral oil Test: Negative. Sesame oil Test: Negative. Cold test (after 24 hours): Negative.
Sodium gluconate,also known as pentahydroxy sodium salts,is white or light yellow crystaline particles or powder,easily soluble in water,slightly soluble in alcohol,insoluble in ether. 1. In construction industry,sodium gluconate can be used as a water reducer and retarder.Adding a certain amount of sodium gluconate to the cement can increase the plasticity and strength of the concrete,and has a retarding effect,that is,delaying the initial and final solidification time of the concrete. 2. In textile printing and dyeing industry,it is used as a high-performance chelating agent. 3. It is a kind of special cleaning agent for glass bottles.Glass bottles professional cleaning agent using sodium gluconate as the main formula can improve the following common problems:detergency is not strong,easy to plug the nozzle and pipeline of the bottle washing machine. 4. It can be used as steel surface cleaning agent. 5. It is used as a stabilizer for water quality.Since sodium gluconate has excellent corrosion and scale inhibition effects,it is widely used as a stabilizer for water quality.
Physical and Chemical Properties THF is a colorless transparent liquid and THF density is 089gcm3melting point is 1085boiling point is 66flash point 14 CC refractive index is 1465 20 structure C4H8O THF Acute toxicity LD501650mgkg rat transoral LC5021000ppm Rat inhalation 3h THF is soluble in water ethanol ether acetone benzene etc mainly used as solvent chemical synthesis intermediates analytical reagents Tetrahydrofuran THF Uses Tetrahydrofuran as a fine reaction intermediate can be used as a natural flavor enhancer for tetrahydrothiophene Tetrahydrofuran is used in medicine to produce carbetapentane citrate progesterone rifumycin etc Tetrahydrofuran can be used in chemical production to prepare polytetrahydrofuran tetrahydrothiophene 1 4dichlorobutane 2 3dichlorotetrahydrofuran valerolactone ethanediamine 1 4butanediolgammabutyrolactone and many other chemical products Tetrahydrofuran can also be used as high energy fuel acetylene extraction solvent electroplating coating liquid precision tape cleaning agent leather surface finishing agent light stabilizer of molecular materials etc The most important use of THF tetrahydrofuran is to produce PTMEG According to rough statistics about 80 of THF in the world is used to produce PTMEG and PTMEG is mainly used to produce spandex fiber
Made from heavy duty and high quality see-through glass flower vase our stylish range of makes an ideal adornment and eye-catching decorative accents for any party or home decor. Our hand blown with their thick walls and weighted base will give a modern twist to any floral or centerpiece decoration. These glass centerpiece vases will instantly add flair and visual appeal to any ordinary party or table setting. This size is perfect for tall seasonal flowers; fill with jelly filler balls or acrylic ice crystals of your theme color and top with a submersible LED or a floating candle to create exotic decorative accent. For an even more luxurious look and feel, swathe our satin or organza ribbons around with a cute bow or a flower to make an ethereal party favor or a votive candle holder. Clear see thru glass The glass walls itself are 2.5 mm thick, heavy duty, high quality. Made from heavy duty glass and is a top choice for flower shops & wedding planner.
Made from heavy duty and high quality see-through glass flower vase our stylish range of makes an ideal adornment and eye-catching decorative accents for any party or home decor. Our hand blown with their thick walls and weighted base will give a modern twist to any floral or centerpiece decoration. These glass centerpiece vases will instantly add flair and visual appeal to any ordinary party or table setting. This size is perfect for tall seasonal flowers; fill with jelly filler balls or acrylic ice crystals of your theme color and top with a submersible LED or a floating candle to create exotic decorative accent. For an even more luxurious look and feel, swathe our satin or organza ribbons around with a cute bow or a flower to make an ethereal party favor or a votive candle holder. Clear see thru glass The glass walls itself are 2.5 mm thick, heavy duty, high quality. Made from heavy duty glass and is a top choice for flower shops & wedding planner.
Made from heavy duty and high quality see-through glass flower vase our stylish range of makes an ideal adornment and eye-catching decorative accents for any party or home decor. Our hand blown with their thick walls and weighted base will give a modern twist to any floral or centerpiece decoration. These glass centerpiece vases will instantly add flair and visual appeal to any ordinary party or table setting. This size is perfect for tall seasonal flowers; fill with jelly filler balls or acrylic ice crystals of your theme color and top with a submersible LED or a floating candle to create exotic decorative accent. For an even more luxurious look and feel, swathe our satin or organza ribbons around with a cute bow or a flower to make an ethereal party favor or a votive candle holder. Clear see thru glass The glass walls itself are 2.5 mm thick, heavy duty, high quality. Made from heavy duty glass and is a top choice for flower shops & wedding planner.
Made from heavy-duty and high-quality see-through glass flower vases our stylish range of makes an ideal adornment and eye-catching decorative accents for any party or home decor. Our hand blown with their thick walls and weighted base will give a modern twist to any floral or centerpiece decoration. These glass centerpiece vases will instantly add flair and visual appeal to any ordinary party or table setting. This size is perfect for tall seasonal flowers; fill with jelly filler balls or acrylic ice crystals of your theme color and top with a submersible LED or a floating candle to create an exotic decorative accent. For an even more luxurious look and feel, swathe our satin or organza ribbons around with a cute bow or a flower to make an ethereal party favor or a votive candle holder. Clear see thru glass The glass walls themselves are 2.5 mm thick, heavy-duty, high quality. Made from heavy-duty glass and is a top choice for flower shops & wedding planners.
Made from heavy duty and high quality see-through glass flower vase our stylish range of makes an ideal adornment and eye-catching decorative accents for any party or home decor. Our hand blown with their thick walls and weighted base will give a modern twist to any floral or centerpiece decoration. These glass centerpiece vases will instantly add flair and visual appeal to any ordinary party or table setting. This size is perfect for tall seasonal flowers; fill with jelly filler balls or acrylic ice crystals of your theme color and top with a submersible LED or a floating candle to create exotic decorative accent. For an even more luxurious look and feel, swathe our satin or organza ribbons around with a cute bow or a flower to make an ethereal party favor or a votive candle holder. Clear see thru glass The glass walls themselves are 2.5 mm thick, heavy-duty, high quality. Made from heavy-duty glass and is a top choice for flower shops & wedding planner.
Technical Specification Name Values Product Name Rhodes Grass Scientific Name Chloris Gayana Type Hay Grass Variety Finecut Place of Origin Pakistan Color Lush Green Moisture (%) 9 â?? 10 % Max Crude Protein (%) 12 % Admixture (%) 0.0 % (None) Nutritional Specification /Components Percentage (%) Crude Fibre 29.0 â?? 30.0 % Ash 6.0 â?? 9.0 % (Max) Nitrogen Free Extract 50.0 â?? 53.0 % Ether Extract 1.30 â?? 1.7 (Max) Total Aflatoxin(ppb) 10.0 % Total Endophyte (ppb) 0.0 % (Endophyte free) Packaging details Name Details Minimum Order Requirement (MOQ) 20 tons Payment Options LC/TT Packaging Style Bales or as per customer requirement Square Field bale 250 â?? 300 kg/bale Double Compressed bale 28 â?? 30 kg/bale Container Loading Weight 16 â?? 22 M Ton / Container Container HQ (ft) 40 feet Bales per Container 450 -600 bales (depends on the bale type) Number of Bales per container As per the Container Weight
Sodium gluconate,also known as pentahydroxy sodium salts,is white or light yellow crystaline particles or powder,easily soluble in water,slightly soluble in alcohol,insoluble in ether. 1. In construction industry,sodium gluconate can be used as a water reducer and retarder.Adding a certain amount of sodium gluconate to the cement can increase the plasticity and strength of the concrete,and has a retarding effect,that is,delaying the initial and final solidification time of the concrete. 2. In textile printing and dyeing industry,it is used as a high-performance chelating agent. 3. It is a kind of special cleaning agent for glass bottles.Glass bottles professional cleaning agent using sodium gluconate as the main formula can improve the following common problems:detergency is not strong,easy to plug the nozzle and pipeline of the bottle washing machine. 4. It can be used as steel surface cleaning agent. 5. It is used as a stabilizer for water quality.Since sodium gluconate has excellent corrosion and scale inhibition effects,it is widely used as a stabilizer for water quality.
