Description YJS Hydraulic Jar Intensifie YJS hydraulic jar intensifier is a kind of down hole fishing jar tool designed to increase jarring function for up jar. So it must be used together with super fishing jar. It could accelerate for the top end of jar and the drill collar connecting with its bottom end when working, so to get larger jarring force on stuck point, and reduce quake of drill stem springback after jarring at the same time. We produce H2S resistance Jars, which adopt high quality import sulfur-resistance material. Modelexradius OD mm(inch)inradius ID mm(inch)Stroke mm(inch)Max. tensile load in down hole MNSealing pressure MPaMax. working temperature ?Connection APIOverall length mm(inch) YJS46121(4 3/4)38(1 1/2))224(8 3/4)0.920120NC383275(129) YJS62159(6 1/4)57.2 (2 1/4)329(13)1.520120NC504380(172) YJS64165(6 1/2)57.2 (2 1/4)329(13)1.520120NC504380(172) YJS70178(7)60 (2 5/16)336 13 1/41.8201205 1/2FH3740(147) YJS76197 (7 3/4)76.2(3)333 13 1/82.1201206 5/8REG4238(167) YJS80203(8)76.2(3)333 13 1/82.2201206 5/8REG4238(167 Packaging & Delivery Packing :According to customer requirementsMinimum Order : 1 piecesSupply Ability : 600 sets/year
Product Description Introduction Nine titanium electrodes turn the water to into alkali water and acidic water.Generally, ionized water machines use tap water and ground water to produce alkaline or acidic ionized water through an electrolytic device (electrolytic cell). Alkaline ionized water is produced at the cathode(-), which contains minerals such as calcium, potassium, sodium, and magnesium, and acidic ionized water is produced at the anode(+), which contains minerals such as phosphorus, sulfur, and chlorine within the electrolytic device (electrolytic cell). The alkaline ionized water is potable, and the acidic ionized water can be used for washing purposes. The alkaline ionized water machine generates materials for medicinal purposes and was approved by the Food and Drug Administration. Its effects in treating chronic diarrhea, indigestion, abnormal zymolysis in the stomach and excessive stomach acid were recognized.It is light and thus can be easily placed in the kitchen. Water is released in nine levels i.e. alkali water in four levels, acidic water in four levels and purified water in one level. It has a voice message and is easy to handle. It has a convenient touch sensor and LCD monitor that displays the PH level, ORP and filter life. . * MADE IN KOREA *�9 Platinum Titanium plates. * Front Sliding Door Type * Clear color LCD screen. * Step 9 production (acid alkaline step 4, step 4, an integer) heading. * Automatic cleaning function after every use every * Soft-touch functionality using a capacitive sensor * Color to display each color, step-by-step pH 7 * Each display features step-by-step pH * Self-diagnostic error display function * Large 2 Filter System * Filter life display function * Each use of voice mail features * Heading flow display function * SMPS power control * There is no integers heading emissions of water
High performance magnesium production line 1. Iso9001: 14000 2. Lifetime service 3. Market share: 90% 1. Production capacity We can provide complete set technology solutions and supporting production equipments of magnesium production line. 1). Design capacity of single production line: 5000-25000 tons per year 2). According to client's special requirements to design. 3). We have professional process design engineers, equipment engineers, electrical engineers, etc. 4). We have more than 50 years' experiences of production design, and the market share is over 90%. 2. Main equipments: Rotary kiln, ball mill belt conveyor, vertical preheater, vertical cooler, vibrating feeder, screw conveyor, bucket elevator, bag type dust, etc. 3. Technical stepls 1) calcine dolomite: heat the dolomite to 1100~1200 temperature in the rotary kiln, then the dolomite changed into mgocao. 2) dosing ball: calculating. Dosing and grinding the mgocao...Ferrosilicon and flousper power, then press into ball. 3) reduction: heating the ball to 1200+10 tem in the reduction pot, keeping 8-10hour under the situation of 13.3pa or empty space. The mgo was reduct as magnesium vapour, then cooled into rough magnesium. 4) refining magnesium ingot.: heating the rough magnesium, and under the situation of 710 tempurature, made it into magnesium ingot, that is pure magnesium. 5) scouring: acid magnesium ingots, will with sulfuric acid, nitric acid cleaning surface or removed from the surface, make the surface appearance
PrestigeCoal Plus: Elevating Excellence in High-Grade Coal Brief overview of the product's key features and benefits 1.Product Specifications Detailed breakdown of key specifications: Moisture Content (ADL 19.32%) Fixed Carbon Content (FC 45.81%) Ash Content (AD 6.53%) Sulfur Content (.82%) 2.Performance Advantages How PrestigeCoal Plus enhances energy generation and operational efficiency Comparative analysis of combustion efficiency with visuals/graphs 3.Environmental Responsibility Emphasis on low sulfur content and reduced emissions Benefits of clean-burning coal for environmental sustainability 4.Applications Versatility of PrestigeCoal Plus across various industries: Power generation Manufacturing Commercial heating And more... 5.Case Studies Real-world examples of how PrestigeCoal Plus has positively impacted specific industries Testimonials from satisfied clients 6. Quality Assurance Insight into our rigorous quality control measures Certifications and standards adhered to 7.Supply Chain and Logistics Seamless delivery and supply coordination Flexibility in meeting customer demands 8.Your Partnership with PrestigeCoal Plus Collaborative approach to tailor solutions to specific buyer requirements How to initiate a partnership At PrestigeCoal Plus, we believe in providing more than just a product â?? we deliver a commitment to excellence, sustainability, and innovation. Our high-grade coal is poised to empower your operations with unmatched efficiency, reduced environmental impact, and a steadfast supply chain. Join us on this journey towards a future fueled by excellence.
Diesel EN590 (Ultra Low Sulphur Diesel) describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union and Britain. Since 2007 this is called Ultra Low Sulphur Diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). Automotive diesel has national variants but the usual variants traded are EN560 and EN590 which are specified by International Organization for Standardization (ISO) in Paris. Ultra lowsulfur diesel (ULSD) is fuel with substantially lower sulfur content. Since 2006, almost all of the petroleum based diesel fuel available in Europe and North America has been of a ULSD type. Diesel EN590 for diesel (in Europe) has been around for almost 20 years. However fuel, like most products, is subject to a process of continuous development and that development includes responding to legislation. The standard has been amended many times since 1993. It had been introduced along with the European emission standards. With each of its revisions EN590 had been adapted to lower the Sulphur content of diesel fuel. The quality of European diesel fuels is specified by the EN590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. It is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN590. Please read carefully before making a request. Information on our company policy regarding quotes. We at Alma International Trading require a Letter of Intent (Loi) from the end purchaser before we can provide a detailed price quote. Once we receive the Loi, our team will promptly review it and provide you with an accurate and comprehensive price quote. We do not respond to emails and phone calls to receive information without a written request with the final buyer's details. Important Notice Regarding False Documents If the selling company receives any false documents from the buyer or their intermediaries, we will take swift and decisive action. It is our duty to ensure the integrity and legality of all transactions we engage in. In the event that false documents are presented, we will not hesitate to report the matter to the local police. Furthermore, we will elevate the issue to INTERPOL and the International Chamber of Commerce. Our aim is to protect the interests of all parties involved and maintain a safe and transparent business environment. We expect all transactions to be conducted in an honest and professional manner. Thank you for your attention to this matter. Best regards, ALMA International Trading FZE LLC
Eco Farming is a super active organic fertilizer that contains complete nutrients by utilizing microbial technology as a bioactivator to restore soil fertility. The use of Eco Farming Fertilizers is able to reduce the use of excessive inorganic fertilizers to only 25%, so that it can be an alternative for developing healthy and environmentally friendly agricultural production. HOW TO MAKE ECO FARMING FERTILIZER (SOLUTION) ï?§ Dissolve Eco Farming Fertilizer with a ratio of 1 tube: ï?§ 1 liter of solvent water (Cane Drops Water, Coconut Water, Rainwater) becomes 1 liter ï?§ Eco Farming Fertilizer solution. Do it 15 minutes or the day before ï?§ application, the longer it is left, the better because of the presence of ï?§ addition of positive micro-organism nutrients to eco-farming fertilizers 2. HOW TO MAKE ECO FARMING FERTILIZER READY TO USE (DILUTION) ï?§ Dosage for land use with units of ml/tank, add water according to the capacity of the spray tank volume (15-20 liters) and mix eco farming which has been dissolved in a 1 liter bottle container with a mixture of 50 ML 3. PROCEDURE FOR USE OF FERTILIZER ECO FARMING (APPLICATION) Land can be sprayed or watered with Eco Farming Fertilizer which has been diluted in the tank. ï?§ Plants must be sprayed on the leaves at 07.00-10.00 with Eco Farming Fertilizer which has been diluted in the tank. NUTRITION CONTENT AND BENEFITS IN SUPER ACTIVE ORGANIC FERTILIZER ECO FARMING Eco Farming's Super Active Organic Fertilizer has 13 essential nutrients needed by all types of plants and is divided into 3 groups, namely: 3 (Three) Primary Macro Nutrients consisting of N, P and K 3 (Three) Secondary Macro Nutrients consisting of S, Ca and Mg 7 (Seven) Micro Nutrients consisting of Cl, Mn, Fe, Cu, Zn, B and Mo) The benefits and symptoms of plants that require these nutrients are detailed as follows: 1. NITROGEN (N) 2. PHOSPHORE ( P ) 3. Potassium (K) 4. CALCIUM (Ca) 5. MAGNESIUM (Mg) 6. Sulfur (S) 7. BORON (Bo) 8. COPPER ( Cu ) 9. CHLORINE ( CI ) 10. IRON (Fe) 11. MANGANESE (Mn) 12. MOLIBDENUM ( Mo ) 13. ZIN (Zn) LEGALITY ECO FARMING MINISTRY OF RI LICENSING: SK MENTAN NO : 039.OL/Kpts/SR.310/B/01/2020 DATE OF MENTAN SK: JANUARY 20, 2020 COMPANY NAME: PT. BANDUNG ORGANIC INNOVATION REGISTRATION NUMBER: 02.08.200.005 FERTILIZER TYPE: ORGANIC BRICKET
The Sintered Stainless Steel Porous Metal Filter Tube is created from irregularly-shaped stainless steel powder, typically AISI 316L. The powder is compressed into a mold, then sintered at high temperatures to form a porous tube with exceptional resistance to high temperatures, corrosion, and mechanical strain. At filtration accuracies of 70�µm or finer, particle chipping can be an issue with some filters. However, our sintered metal tube avoids this problem thanks to our advanced vacuum sintering equipment and skilled production staff. Furthermore, each sintered metal tube undergoes rigorous testing with bubble point and air permeability tests according to ISO 4003 and ISO 4022, respectively. This ensures that our filters are of the highest quality and meet the needs of every customer. Parameters: Brand: TOPTITECH Length: 50-1016mm Diameter: 4-500mm Wall thickness:1-5mm Filtration accuracy: 0.22-100um Operating temperature: 600â?? Working pressure: 3Mpa Porosity: 35%-60% All specifications can be customized. Features 1.Resistant to high temperatures up to 600â?? during normal use. 2.Strong mechanical strength and good plasticity, allowing for machining. 3.Resistant to corrosion and oxidation, suitable for use in nitric acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid, liquid hydrogen, and liquid nitrogen environments. 4.Capable of being molded according to customer drawings, with an efficient molding process. 5.Provides high filtration accuracy and effective purification. 6.Uniform pore size and stable internal structure, with no particle shedding. 7.Allows for good air permeability and easy back blow cleaning, with the ability to be repeatedly regenerated online. 8.Exhibits excellent wear and impact resistance, with strong mechanical properties. Application 1. The procedure used to produce chemical raw materials, which also includes filtering for impurities, material decarburization, and fine filtration. 2. Water treatment systems with security filtration, RO, and ultrafiltration. 3. The completed product clarity and filtration in the food and beverage industries. 4.Precious metal catalyst filtration and recovery in the petrochemical industry. 5. Precision filtering of liquid chemical industry raw materials, finished goods, and pharmaceutical intermediates. 6. Water injection filtration using reverse osmosis for security. 7.Deoiling of compressed air and gas purification of steam. 8.Medium purification and flow restriction for hydraulic fluids, lubricants, and fuels.
Sodium carbonate is one of the important chemical raw materials, widely used in light industrial daily chemical, building materials, chemical industry, food industry, metallurgy, textile, petroleum, national defense, medicine and other fields, as raw materials for the manufacture of other chemicals, cleaning agents, detergents, also used in photography and analysis fields. It is followed by metallurgy, textiles, petroleum, national defense, medicine and other industries. The glass industry is the largest consumer of soda ash, consuming 0.2 tons per ton of glass. In the industrial soda, mainly light industry, building materials, chemical industry, accounting for about 2/3, followed by metallurgy, textile, petroleum, national defense, medicine and other industries. 1. The glass industry is the largest source of soda ash consumption, with 0.2t of soda ash consumed per ton of glass. Mainly used for float glass, picture tube glass, optical glass and so on. 2, used in chemical industry, metallurgy, etc. The use of heavy soda ash can reduce alkali dust flying, reduce raw material consumption, improve working conditions, but also can improve the quality of products, while reducing alkali powder on refractory erosion action, prolong the service life of the kiln. 3, as buffer, neutralizer and dough improver, can be used in pastry and noodle food, according to the production needs of appropriate use. 4, as detergent for wool rinsing, bath salt and medical use, tanning alkali agent in leather. 5, used in the food industry, as a neutralizer, leavening agent, such as the manufacture of amino acids, soy sauce and noodle food such as steamed bread, bread, etc. It can also be mixed into alkali water and added to pasta to increase elasticity and ductility. Sodium carbonate can also be used to produce monosodium glutamate 6, color TV special reagent 7, used in pharmaceutical industry, as acid antidote, osmotic laxative. 8, used for chemical and electrochemical oil removal, chemical plating of copper, aluminum etching, aluminum and alloy electrolytic polishing, aluminum chemical oxidation, phosphating after sealing, process rust prevention, electrolytic removal of chromium coating and chromium removal of oxide film, also used for pre-plating copper, plating steel, plating steel alloy electrolyte 9, metallurgical industry used as smelting flux, flotation agent with beneficiation, steel and antimony smelting used as desulfurizer. 10, printing and dyeing industry used as water softener. 11, leather industry is used for degreasing raw skin, neutralizing chrome tanning and improving the alkalinity of chrome tanning liquid. 12. The reference of acid in quantitative analysis. Determination of aluminum, sulfur, copper, lead and zinc. Urine and whole blood glucose were tested. The cosolvent of silica in cement was analyzed. Metallographic analysis, etc.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
Titanium rod filter element is a porous filter element made of industrial high-purity titanium, which is formed by sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has outstanding qualities such as corrosion resistance, high temperature resistance, high strength, ease of filtration accuracy assurance, and ease of regeneration. It is suitable for the filtration of various corrosive media, such as: hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium. Technical Parameters Filtration accuracy: 0.22um-100um Porosity: 30-40% Air permeability: 0.02-20M3cm/m2h Compressive strength: 0.5-1.5Mpa Temperature resistance: 280C (wet state) Maximum working pressure difference: 0.6Mpa Diameter: 30mm 50mm 60mm Length: 5 inches 10 inches 20 inches 30 inches 40 inches Interface form: M20 M30 222 226 DFPD (double flat port) Filtration accuracy: 0.45m, 1m, 3m, 5m, 10m, 20m, 30m, 50m, 80m, 100m Features 1. High temperature resistance Generally, it can be used normally under 280 degrees. 2. Uniform and stable precision Uniform structure, narrow pore size distribution, high separation efficiency, high porosity, low filtration resistance, high penetration efficiency. 3. Resistance to corrosion Chemical stability, acid and alkali corrosion resistance, and oxidation resistance are all strengths. 4.A large filter area In accordance with food hygiene and pharmaceutical GHP criteria, there is no particle shedding and no secondary polluting of the original solution. 5. Longevity It is easy to clean, can be regenerated online, and has a long service life (generally several times that of membrane filter elements). Applications 1. It is employed in the pharmaceutical business for decarbonization filtration in the concentrated preparation of big infusions, tiny injections, eye drops, and oral liquids, as well as security filtration prior to terminal filtration in diluted preparations. 2. Impurity removal and filtration in the raw material production process, decarbonization filtration, and fine filtration of materials. 3. Ultrafiltration, RO, and EDI security filtration in the water treatment business, as well as filtration following ozone sterilization and ozone aeration. 4. Clarification and filtering of beverages, liquor, beer, vegetable oil, mineral water, soy sauce, and vinegar. 5. Filtration and recovery of ultrafine fine particles and catalysts, precision filtration following resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. are all processes used in the chemical industry to decarbonize liquid products, liquid raw materials, and pharmaceutical intermediates.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, which is formed by pressing the mold and sintered at high temperature in vacuum. Hydrogen production by water electrolysis is a new energy pillar sunrise industry. The micropore diameter of the porous titanium plate is used to fully react with the medium to produce hydrogen energy. The surface is coated to prevent oxidation and increase the efficiency of hydrogen production. Porous titanium plates are widely used in hydrogen energy, petrochemical, and pharmaceutical filtration, with obvious advantages, and are indispensable products. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300 Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments. Applications The porous titanium plate is used as the GDL (gas diffusion layer) of the anode for hydrogen production by water electrolysis in PEM water electrolysis. The pores are uniform and the porosity can be controlled at 30%-40%. Good electrical conductivity and strong corrosion resistance. It can be coated with platinum group metals to enhance its catalytic performance. The cost is relatively high, but the hydrogen production efficiency is high and the purity is high, which is suitable for industrial hydrogen production. Every kind of filter material will be blocked, so it is very important to choose the pore size. If you choose the right pore size, you will have a good filtration efficiency, and the blocking situation will be alleviated. If the blockage is serious, regular replacement can solve this problem.
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance. The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy. Product parameters Material: 316L, 304 Specifications: OD 8- 37mm Length 10-50mm Accuracy: 1-50 m Temperature resistance: 600 Maximum working pressure difference: 0.6Mpa Application Environment Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments Product features 1. Good mechanical properties 2. Stable shape 3. Good air permeability 4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static 5. High temperature resistance 6. Uniform bubbles, wide range of gas dispersion, no clogging Product applications 1. Catalyst recovery 2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam 4. Noise reduction, flame resistance, gas buffer Craftsmanship The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use. Filtration principle A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
Customized cylinder titanium filter tube cartridge is a new type of high-efficiency porous filter material made of metal� titanium powder� as the raw material through powder sieving, cold isostatic pressing molding, sintering, mechanical welding processing, etc., because its pores and filtration accuracy can be carried out in a wide range Adjustment is widely used in the fields of self-lubrication, filtration, separation, catalysis, flame extinguishing, heat exchange, thermal electron generation, and gas distribution. Brand: TopTiTech Origin: Baoji, China Material: Titanium Main purpose: used for gas and liquid filtration and gas distribution. Filtration accuracy: 0.2-50�¼m Diameter: 30-80mm Length: 100-1000mm (special specifications can be customized) Filtration principle: Customized cylinder titanium filter tube is a porous titanium metal filter material made by powder metallurgy. Its internal pores are curved and crisscrossed. The pore size distribution is uniform. The filtration mechanism is typical of deep filtration. Performance: This product has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy filter accuracy, and easy regeneration; the titanium filter is formed by titanium powder formed and sintered at high temperature, so the surface particles are not easy to fall off; in the air the use temperature can reach 500-600â??; it is suitable for the filtration of various corrosive media, such as hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia, and iron, copper, sodium, and other chloride solutions; It has excellent mechanical properties, and can be cut, welded, and another machining; high compressive strength, internal pressure damage strength up to 2MPa or more; 7. its filtration accuracy is easy to ensure, even if it works under high temperature and pressure, the pore size will not be deformed; the porosity is up to 35-45, the pore size distribution is uniform, the dirt holding capacity is large; the regeneration method is simple and can be reused after regeneration. Application Liquids or gases filtration in high temperature and pressure; Filtration of liquids or gases containing ozone; Prefiltration and decarbonization in pharmaceuticals industry, as a small injection, oral, etc ; Highly corrosive liquid and gas purification.
Addition cure Electronic Potting Silicone Rubber 1. Product Feature of Addition cure Electronic Potting Silicone Rubber Electronic Potting Silicone Rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã?�PPã?�ABSã?�PVC, etc. and metal materials. 2. Typical Application of Addition cure Electronic Potting Silicone Rubber HY-9055 electronic potting silicone rubber could be applied to - high powered electronics, - DC/DC module and circuit board which requires heat dissipation and high temperature resistance. -It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. 3. Technical Guidelines of of Addition cure Electronic Potting Silicone Rubber a, Pls put part A and part B in separate container and stir evenly before mixing the two part together. b, Mixing Ratio: part A: part B = 1:1 c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring. 4.Notes of Addition cure Electronic Potting Silicone Rubber a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas. Organotin compound or Condensation silicone with organotin Sulphur, sulfide and sulfur rubber materials. Amine compounds as well as contains the amine materials. Pewters solder flux b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste. c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes. d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance. PACKAGE 40Kg/pail as a set (Part A 20Kg + Part B 20Kg) SHELF LIFE AND TRANSPORTATION 1. Twelve(12) months when stored at 24C in tightly closed original packages. 2. This kind of product is non-dangerous product, which could be transported as general chemicals. 3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons. -
Platinum Cure Silicone Foamsfor filling Description of Platinum Cure Silicone Foams for filling Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pigsilicone color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation. Typical Applications for Platinum Cure Silicone Foams for filling Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening. Technical Parameters Product HY-F663 Appearance white Mix ratio(A:B) 1:1/10:1 Mixed Viscocity ï¼?mPa.sï¼? 15000±2000 Pot life/working time (mins) 5-8 Curing time/setting time (mins) 40 Shrinkage rate ï¼?%ï¼? 0.1 Approx. volumetric expansion 3.5 times Lbs./Cu. Foot=Kgs./Cu.meter 20 lb/ft3 = 320 kg/m3 PROCESSING RECOMMENDATIONS of Platinum Cure Silicone Foams for filling silicone products Store and use at room temperature (73°F/23°C). These products have a limited shelf life and should be used as soon as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Cure Inhibition - Addition cured silicones may be inhibited by certain contaminants such as sulfur, polyesters,certain wood surfaces, epoxies, urethane rubber and tin catalyzed silicones resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of foam onto a non-critical area of the pattern.Inhibition has occurred if the matrerial is gummy or uncured after the recommended cure time has passed. This product will not cure against tin-based silicone rubbers. Applying A Release Agent - Silicone Foams will stick to some surfaces and a release agent may be necessary to facilitate demolding. When casting Silicone Foams into or over other platinum silicones, apply Ease Release 200 prior to applying foam. SHELF LIFE: 8-10 months when stored under 24â?? in original unopened packages. PACKAGE: Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail. -
Acne comes too suddenly stay up late/fire/menstrual period... Red blotchy independent type White smothered pox independent type Closed mouth pox independent type Precise sweep acne muscle acne faster step Real measurement Specializes in anti-acne ingredients Focus on acne research acne formula Effectively clear acne and improve acne skin Care for acne muscles Slow down acne Colloidal sulfur Add acne-removing power to reduce acne recurrence. Borneol skin conditioner soothes skin discomfort Salicylic acid + nicotinamide delicate and smooth skin Calamine reduces the time it takes for acne to develop Care for acne muscle 10 Plant extract ingredients plus [1] Portulaca oleracea extract [2] Witch hazel extract [3] Melaleuca alternata leaf oil [4] Asiaticum asiatica extract [5] patchouli extract [6] Reed extract [7] Corn whisker silk extract [8] Rice extract [9] Aloe vera leaf extract [10] Sunflower flower/leaf/stem extract Third party efficacy testing is more assured of effective acne treatment National certification international standards, product development is safer, more effective, more professional, choose us to achieve your brand dream!
Super Austenitic stainless steel is a type of alloy content (MO, CR, Ni, N, etc.) significantly higher than that of ordinary austenitic stainless steel. It is one of the important directions for the development of high -quality special stainless steel. The typical of Super Austenitic stainless steel containing 6%molybdenum and 7%molybdenum.The synergy of CR, MO and N make Super Austenite stainless steel in acidic acid -containing has a very excellent anti -uniform corrosion performance. Under the conditions of seawater, gap, and low -speed scouring, it has good erosive resistance (Pren 56) and better resistant to resistance. Especially for sulfuric acid root ions, chloride ions and other acid root ions, it can be used in a very harsh working environment. In addition, Super austenitic Stainless Steel also has excellent comprehensive mechanical performance. Therefore, these steels are widely used in very harsh service environments such as flue gas treatment equipment, nuclear power industry, pharmaceutical engineering, pulp bleach, phosphate fertilizer and fertilizer industry, marine industry and waste treatment. American standard: ASTM A312-21 ASTM A358-19 ASTM A249-18 European standard: EN10217-7: 2021
Wood Pellets Specification : Origin of goods ( Indonesia ) HS Code 44013100; Total production capacity ( 4000 MT/month - 5000 MT/month ); Gross Calorific Value ( AR 4371 Kcal/Kg, ADB 4575 Kcal/Kg, DB 4704 Kcal/Kg ); Total Moisture (AR 7.08 % wt ); Moisture in the Analysis Sample (ADB 2.74 % wt); Ash Content ( AR 1.03 % wt, ADB 1.13 % wt, DB 1.19 % wt ); Volantine Matter (AR 72.26 % wt, ADB 78.78 % wt, DB 2.19 % wt); Fixed Carbon ( AR 15.62 % wt, ARB 16.35 % wt, DB 16.81 % wt ); Total Sulfur ( AR 0.24 % wt, ADB 0.25 % wt, DB 48.10 % wt ); Carbon ( AR 44.6 % wt, ADB 46.78 % wt, DB 48.10 % wt ); Hydrogen ( AR 5.57 % wt, ADB 5.83 % wt, DB 5.99 % wt ); Oxygen ( AR 39.96 % wt, ADB 41.82 % wt, DB 43,00 % wt ); Hardgrove Grindability Index ( 21 ); Payment ( LC at Sight / DLC/ MT700 ); Price ( 110$/MT FOB Port Tanjung Perak, Surabaya, Indonesia ); Full legal document and ready to export;
Bonny Light Crude oil (BLCO) Quantity Bonny light crude oil (BLCO) 2 000,000 barrels (Two million barrels) +/-10% X at Sellers Option; X 12MONTH ,Shipped in one vessel per LOT . Minimum quantity of 1 million barrels. SPECIFICGRAVITY: 0.8459 API AT 60 DEG.F: Min 33.0 - Max 37.00 +/- 5%(ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2%(ASTM D-4006) POUR POINT DEGREES: BELOW 40 (ASTM D-97 SULFUR WEIGHT%: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG.: 2.2(ASTM D-523) DISTILLATION INITIAL BOILINGpoint (IBP): 35 DEG.C (ASTM D-86) DISTILL TO 175 DEG.C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%:60.5 COLOUR: Dark Brown
REFINED WHITE SUGAR ICUMSA 45, ASHBY ELECTRICAL CONDUCT 0.04%MAX. [BASED ON DRY WEIGHT] ASH CONTENT 0.04%MAXIMUM POLARIZATION: AT-20-DEGREES-99.80%MINIMUM HUMIDITY 0.04%MAXIMUM ICUMSA45 UBI MAX. [BRAZIL SGS SCALE] ; MAX RBU ATTENUATION INDEX UNITS (METHOD#:4-1978) SOLUBILITY 100%DRY AND LIQUID RADIATION BLEACH CS-137 OF 50 BQ PER KG; NORMAL INTERNATIONALLY. ACCEPTED LIMIT WITHOUT PRESENCE OF CESIUM OR IODINE MAGNETIC PARTICLES MG/KG4MAX. SO2 MG/KG20MAX. SULFUR DIOXIDE: 20 MG/KG MIN GRANULATION FINE CRYSTAL SOLUBILITY 100% DRY AND FLUID COLOUR BRIGHT WHITE SEDIMENT NONE SMELL TYPICAL AND SPECIFIC FOR SUGAR SUGAR REDUCTION: 0.05%-0.010%MAX BY WEIGHT SUBSTANCE: SOLID, CRYSTAL MAGNETIC PARTICLES: MG/KG 4 MAXIMUM MAXPB: 1PPM UCMAX: 3 PPM HONSTAPHAUREUS: NON DETECTED IN 1 GRAM FREEFROM: UNNATURAL ODORS, CHEMICALS AND INSECTS, NO RADIATION, NO VIRUSES, NO INSECT PARTS, NO POISONOUS AND NON-GENETIC MATERIALS AND IS FIT FOR HUMAN CONSUMPTION.
