Special Purity Granulated Food-Grade Salt with YPS is a Pure salt just washed, filtered, dried, screened and quality-control tested with yellow prussiate of soda (YPS) added for anti-caking. Great for all food applications. Sales Specifications Sodium Chloride, NaCl, (%): 99.82 Min Calcium Sulfate, CaSO4, (%): Calcium Chloride, CaCl2, (%): Magnesium Sulfate, MgSO4, (%): Magnesium Chloride, MgCl2, (%): Moisture (%): 0.10 Max Water Insolubles, ppm: 140 Max Calcium Ca ppm: Magnesium Mg ppm: Sulfate SO4 ppm: Heavy Metals as lead Pb ppm: 2.0 Max Iron Fe ppm: 2.0 Max Copper Cu ppm: 1.0 Max Packing 50 lb paper bag, 49 bags per pallet.
Soda Ash Dense has a higher density lowers the temperature at which sand melts when making glass. Glass that uses soda ash is flat glass (windows, automotive, mirrors) and container glass (food and beverage bottles, tumblers and serving dishes). Soda ash is also used in detergents, directly as a water softener in dry mix, and as a raw material for other detergent chemicals. Soda Ash is used for neutralization (lead-acid battery recycling, environmental acid controls) and in aluminum manufacturing. In addition to being a fundamental ingredient in glass manufacturing, soda ash is necessary to petroleum refining, pulp and paper production. Soda ash is one of the ten highest volume minerals produced in North America and constitutes nearly 25% of every pound of glass manufactured. Itâ??s used in Ceramics, chemical reagents, soaps, electroplating, metal cleaning, paper coating, enameling, and other general chemical uses. Sodium Carbonate, Dense WC Code: 19-011-001 Chemical Characteristics Sodium Carbonate (as Na2CO3): 99.6% Min Sodium Oxide (as Na2O): 58.2% Min Sodium Sulfate (as Na2SO4): 2000PPM Max Sodium Chloride (as NaCl): 1000PPM Max Water Insoluble: 500PPM Max Bulk Density (lbs/ft): 56.0 Min *Meets FCC standards and is GRAS Particle Size Distribution + 20 mesh (850 micron): 0.4% Max + 30 mesh (600 micron): 8.0% Max + 100 mesh (150 micron): 85.0% Min 200 mesh (75 micron): 2.0% Max Packing 50 lb bag, 49 bags per pallet 2000 lb supersack
Sodium bromide is an inorganic compound with the formula NaBr. It is a high-melting white, crystalline solid that resembles sodium chloride. It is a widely used source of the bromide ion and has many applications. Sodium Bromide is used as an anticonvulsant and a sedative; applications for photographic film, spices, dye. Sodium bromide is widely used for the preparation of other bromides in organic synthesis and other areas. Sodium bromide is used to prepare dense drilling fluids used in oil wells to compensate a possible overpressure arising in the fluid column and to counteract the associated trend to blow out. Sales Specification Appearance: White Free Flowing Powder pH: 6.0 - 9.0 pH Purity: NLT 99.0% Chloride: NLT 0.02% Sulphate: NLT 0.3% Heavy Metal N/A Insoluble Matter: NIL Moisture Content By KF: NLT 1.0% Packing 55.12 Lb bag, 40 bags per pallet
Sodium Bislufate Food Grade is used primarily to lower pH, Used as an additive / an ingredient/ an intermediate for the production of a wide variety of products in the chemicals and industries. Sodium bisulfate is used as a food additive to leaven cake mixes (make them rise), as well as being used in meat and poultry processing and most recently in browning prevention of fresh-cut produce. Food grade sodium bisulfate is used in a variety of food products, including beverages, dressings, sauces, and fillings. Sales Specifications Appearance: White Pearls Assay: 98.0% Min Sodium Sulfate: 1.0-4.3% Moisture as H2O: 0.2-0.5% Iron: 0.002-0.005% Chloride: 0.1% Max Selenium: 0.00025% Max Arsenic: 0.00030% Max Lead: 0.00010% Max Mercury: 0.00010% Max pH (10% Aqueous solution): 1.0-1.4 Bulk Density: 1350-1450 kg/m3 Water Insoluble: 0.01% Max Drying Loss: 0.8% Max Packing 55.12 lb bag/ 40 bags per pallet 2204.6 lb supersack
Sodium Bifluoride also known as Sodium Hydrogen Difluoride Is mainly used as a precursor to sodium fluoride, millions of tons of which are produced annually. It is used to manufacture tin plates, as a neutralizer in laundry to preserve anatomical/zoological samples, and for glass etching. It is also used in antiseptics, leather bleaches, and cleaners (for stone, brick, ceramics, and masonry). It is also utilized in the synthesis of fluoride glasses at RT. Specification Assay: 98.00 % Min. Appearance: White free flowing powder Solubility: Highly soluble in water Melting Point: Starts to decompose into NaF and HF above 140C Hydrogen Fluoride (HF): 32.00 % Min. Fluorine (F): 59.65 % Min. Sodium (Na): 37.20 % Min. Moisture (@ 100C): 0.80 % Max. Iron(III) Oxide (Fe2O3): 0.02 % Max. Silica (SiO2): 0.10 % Max. Water Insoluble: 0.20 % Max. pH (1% Solution): Acidic Sieve Grading/Density 100 BSS (152 �¼m) = 100 %: + 100 BSS (152 1/4m) = NIL + 200 BSS (75 �¼m) = 20 %: 200 BSS (751/4m) = 80 % Packing 55.12 lb bag, 40 bags/pallet DOT Transportation UN/NA: 2439 Proper Shipping Name: Sodium Hydrogen Difluoride Hazard Class: 8 Packing Group: II
Sodium Bicarbonate Industrial Grade/NSF Grade WC Code: 19-008-02 Sales Specification Thermal decomposition: Decomposes (w/out melting) into Na2CO3,H2O, and CO2 Alkali Equivalent: 1 lb. NaHCO3= 0.369 lb. Na2O Carbon Dioxide Equivalent: 1 lb. NaHCO3= 0.524 lb. CO2 Specific Gravity: 2.16g/cm 3 Specific Heat @ 25 C: 20.94 cal/ deg mol Solubility in water @ 60 C: 16.4 g/100g H2O Solubility in other solvents: Insoluble in alcohol Heat of formation: -227.25 K cal/ mol Heat of solution: 3.81 K cal/ mol Taste: Slightly alkaline Sodium: 27.1 % minimum Screen Analysis Assay: 99.8% Bulk Density (lbs/ ft3): 71.52 lbs/ ft3 USS Screen Micron Specification 100 150 0-80 200 75 20-100 325 45 50-100 Packing 50 lb bag 49 bag/plt 2000 lb and 2450 lbs super sack
Sodium Ascorbate FCC USP is used mainly in Additive and Acidity Regulator Additive in Food & Beverages, Pharmaceutical & Medicinal Additive, Dietary Supplements, and Bread Mixes as part of the dough conditioner system. In frostings used as antioxidant and preservative. USP NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Sales Specification Quality: USP24/FCC IV, Kosher Certified Appearance: White to slightly yellow crystalline powder Specific Optical Rotation: +103 +108 Loss on Drying: 0.25% Max Heavy Metals: 0.001% Max Lead: 0.001% Max Arsenic: 0.0003% Max Mercury: 0.0001% Max Zinc: 0.0025% Max Copper: 0.0005% Max PH (10%, W/V): 7.0-8.0 Assay: 99.0% â?? 101.0% Particle size: Through US 40 Mesh 95% Min Organic Vol. Impurities: Meet USP Requirement Packing 25 KG carton
Sodium Alpha Olefin Sulfonate AOS-40 is a pale yellow 40% aqueous solution of sodium C14-16 alpha olefin sulfonate. AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid. AOS-40 is perfect for sulfate-free detergent products, household products, car washing compounds, emulsion polymerization; and dying process. Sodium Alpha Olefin Sulfonate (AOS 40) WCode: 19-117-1 Sales Specification Appearance: Straw yellow to amber colored liquid Active Matter (%): 38% ± 1 NDOM (Max), %: 4.0 Max. pH (5% AQ Solutions): 7.0 - 9.0 Inorganic Salts (Max), %: 4.0 Max. Color Klett, (5% AM solution 40 mm cell): 80 Max Packing 485 LB drum, 4 drums per pallet 2204.6 LB Tote Sodium Alpha Olefin Sulfonate (AOS 40) WCode: 19-117-2 Sales Specification Appearance: Clear, Light yellow liquid Active matter (%): 37.0~40.0 pH: 11.50~13.50 Color (Klett) : 60 MAX Na2SO4(%): 1.50 MAX Free Oil(%): 2.50 MAX Packing 2204.6 LB tote 440.92 lb drum, 4 drums per pallet
Sodium Acid Pyrophosphate Food Grade also known as SAPP or disodium pyrophosphate is mainly used in the food applications and food processing. Sodium acid pyrophosphate food grade is extensively used in food processing, as in canned seafood, cured meat and potato products, to adjust the pH, maintain color, improve the water-holding capacity and reduce purge during retorting, Additionally, SAPP is a popular leavening agent found in baking powders. It also has industrial applications such as It is used as a buffering agent in labs, as a chelating agent in antimicrobial studies, as a food acidulant, as a peptizing agent for foodstuffs, as a corrosion inhibitor, as an anti-scaling agent, and as a sequestering agent. It is used in electroplating, metal cleaning, and drilling mud. Specifications Assay, %: 93.00 % -100.50 % Identification A & B: Pass Test Arsenic, ppm: 3 ppm Max Fluoride, %: 0.005 % Max Insoluble Substances, %: 1.0 % Max Lead, ppm: 2 ppm Max PH Value (1% Solution): 3.7- 5.0 Packing 50 LB bags, 44 bags per pallet
Silicone Fluid is used mainly as an intermediate for the production of a wide variety of products in the chemicals and industries. Fluid is intended for use in a variety of medical applications including; lubricant for plastic or rubber devices and instruments, inert protective coating and water repellent film on the skin, and a hydrophobic surface on glass and ceramic substrates. Silicone Fluid 350 WC Code: 19-122-01 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 332.5- 367.5 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013- 1.4053 Spec Gravity (g/cm): 0.965- 0.973 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet Silicone Fluid 1000 WC Code: 19-122-02 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 950.0 - 1050.0 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013-1.4053 Spec Gravity (g/cm): 0.967- 0.975 PPM Silanol (ppm): 0.0 = 600.0 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet
Safflower oil High-Oleic is considered one of the more stable vegetable oils. Safflower oil high oleic can be used in anything from cooking to soap, candles, massage oils, personal care products and more. High-Oleic means that it has a high level of monounsaturated fats, with an oleic percentage of 73% or more. High-oleic safflower oil is very stable, with a long shelf-life and an ability to withstand high temperatures. Safflower can be added in a cold or heated process of formulations without damaging the oil. Specifications Appearance: Clear to Hazy Liquid Peroxide Value: Iodine Value: 89- 93 (Wijs) Free and Fatty Acids: < 0.05% Moisture: < 0.1% Color Lovibond Red: < 1.50 Color Lovibond Yellow: < 15.0 Packing 425 LB drum, 4 drums per pallet 1900 LB tote
Silicone Emulsion 60% is used in industrial applications such as in Rubber and plastics as release agents and lubricants, in Food trays and plastic serving dishes as release agents, in Car polishes and household cleaners to improve protection, resistance, gloss and spread ability and in Textile finishing to enhance feel, water repellency and reduce the need for ironing. Silicone Emulsion 60% is also used in Perlite, vermiculite and clay and other building materials to improve water repellency and protect against dampness. Itâ??s used in Printing and papermaking for lubrication and as an antistatic agent. Silicone Emulsion 60% used as a Release agent for industrial rubber tire plastics and casting materials; Rotary offset printing lubricant; Industrial waterproofing agent and release agent; Additives for maintenance products; Polishing agent for floors and furniture; And Leather maintenance products, etc. Silicone Emulsion 60% WC Code: 24-005-04 Sales Specification Appearance: White Liquid Odour: Characterictic Solid content (%): 60.00 �± 2.0 pH Value: 8.0 �± 1.0 Density (g/cm3): 0.953 �± 0.02 Soluble in water: Miscible Packing 440.92 LB Drum 2204.60 LB IBC Tote
Silicone Dioxide Amorphous is used as filler in rubber products paints animal feeds and insulation materials Its used in printing inks varnishes and in the production of cement and refractory material its used as a precursor in the production of glass and silicon Silicone Dioxide Amorphous is used in sand casting in the production electronic components and works as a component in defoamer Its also used as a sizing agent for the textile industry Sales Specifications Appearance White powder SiO2996 Moisture 009 Loss on ignition 006 Fe2O3001 AI2O3016 Na ppm5 CI ppm5 Density gcm3265 pH7 Whiteness92 Packing 5512 lb bag 40 bags per pallet
Potassium Sorbate is a white solid. It is used as a food preservative in processed food, beverages, and personal-care products. It is utilized as a food antimicrobial agent, to prevent the growth of molds, yeast, and bacteria. Primarily used as a food preservative. Sales Specification Appearance: White Granular Assay: 99% -101.0% Free Acid (As Sorbic Acid):
Potassium Sodium Tartrate FCC Grade is commonly called Rochelle salt, its used in a variety of applications, such as in organic synthesis, in the food industry, and as a medicine in the pharmaceutical industry. Itâ??s used as sequestrant, stabilizer and general-purpose food additive for the food industry and pharmaceutical industry; used as a laboratory reagent, Used in mirror production, in electroplating, its used in the production of wall plaster, and cigarette paper, its used in Fehlingâ??s solution, crystal-controlled oscillators, and as saline cathartic. The FCC grade meets the requirements of the Food Chemical Codex indicates and is suitable for all food, beverage and nutritional supplement applications. Sales Specification Quality Standard: FCC III Assay: 99.0%-102.0% Alkalinity: Conforming to the standard Chloride: 0.035% Max Moisture: 21-26 PH Value: 8-8.50 Heavy Metals as Pb: 0.001% Max As: 0.0003% Max Catalyst Tungsten Acid: 1.2% Max Packing 55.12 lb bag, 40 bags per pallet
Potassium Nitrate also known as saltpeter has a wide variety of industrial applications, itâ??s used to manufacture glass, temper steel, in energy storage salts, itâ??s used in fireworks, fluxes, matches, explosives, rocket propellants, fertilizers, and baths for silver and copper plating; itâ??s used to support combustion in gas cartridges. Industrial use only. Potassium Nitrate WC Code: 16-022-01 Sales Specification Appearance: White Prilled Apparent Density: 1200kg/m3 Melting Point: 333?C Solubility in Water: 31kg/ 100kg water to 20?C Purity as KNO3: 98% Min Chloride: 0.3 % Max Fe: < 5 ppm Cu: < 1 ppm Cr: < 1 ppm Pb: < 5 ppm As: < 0.2 ppm Packing 55.12 lb Bag, 40 bags per pallet DOT Transportation UN/NA: UN1486 Proper Shipping Name: Potassium Nitrate Hazard Class: 5.1 Packing Group: III Marine Pollutant: No
Potassium Permanganate NSFAWWA is an oxidizing agent with a variety of niche applications Potassium Permanganate helps to remove minerals such as iron and manganese from raw water sources It is also for oxidation of organic and inorganic compounds Other applications for this chemical may include reagent for the synthesis of organic compounds medicines fruit preservation aquaculture air and gas purification metal processing and fumigation Sales Specification Appearance Dark Purple Free Flowing Powder Concentration 9750 Min MoistureH20 005 Max Chloride as Cl 002 Max Sulphate as SO4 005 Max Nitrate as NO3 001 Max Insoluble matter 170 Max Water Tolerance Test Pour Test Conforms Bulk Density at 22 C 90100 lbscuft Particle Size Distribution Retained on US Std Sieve No 40 Intl Std 425 2000 Max Passes through US Std Sieve No 200 Intl Std 75 700 Max Packing 5512 LB plastic drum 36 drums per pallet 33069 LB drum 4 drums per pallet DOT Transportation UN No 1490 Proper shipping name Potassium permanganate Hazard Class 51 Packing Group II RQ The Reportable Quantity RQ under CERCLA is 100 lbs
Potassium Persulfate is also known as potassium peroxydisulfate, its used as an initiator and as a strong oxidizing agent and is used widely in bleaching. Potassium Persulfate is used in circuit board cleaning, polymerization imitator, etching circuit boards, enhancing water purification treatment processes, aluminum and copper surface activation, hair dye decolorization. It can be used as an analytical regent, plastic initiator, and oxidant, and in the processing of photofinishing of film. Sales Specifications Content: 98.0% Min Active Oxygen : 5.8% Min Heavy metals (pb): 5 ppm Max Iron (Fe): 10 ppm Max Total Nitrogen (N): 0.1% Max Chloride (CL): 100 ppm MAx Moisture: 0.05% Max Foreign Matter: 10 particles max Packing 55.115 lb, 40 bags in a pallet DOT Transportation UN1492 Proper Shipping Name: Potassium Persulfate Hazard Class: 5.1 Packing Group: III
Potassium Hydroxide (45% Solution) FCC WC Code: 16-021-003 Sales Specification Appearance: Clear and colorless Assay: 44.50 % â?? 45.50 % Specific Gravity at 25oC: 1.448 â?? 1.455 Potassium Carbonate (K2CO3): 0.3 % Max. Sodium (Na): 2,000 ppm Max. Iron (Fe): 1 ppm Max. Calcium (Ca) & Magnesium (Mg): 0.5 ppm Max. Packing 3,265 lb IBC tote DOT Transportation UN1814 Proper Shipping Name: Potassium Hydroxide, Solution Hazard Class:8 Packing Group: II Reportable Quantity (RQ): (Potassium Hydroxide: 1000lbs)
Potassium Hydroxide Flakes FCC WINTERSUN WC Code 16021006 Sales Specification Appearance Flake KOH 900 K2CO3 O7 KCl 0015 Na 04 Ni 10ppm Fe 5ppm Packing 25 kg bag 40 bags per pallet DOT Transportation UN No 1813 Proper Shipping Name Potassium Hydroxide solid Hazard Class 8 Packaging Group II
