Product Description : '"empDRIVES" Energy Efficient AC Three Phase Squirrel Cage Induction Motor. 690V+/ 10%, 50Hz+/ 5% combined variation of 10%, S1 Duty, Class F Insulation temperature raise limited to Class B,IP: 55 Protection, TEFC Enclosure as per IS12615-2011.Motor performance attain IE2,IE3 Level Efficiency. Price of product ( USD price or FOB price) : Pricing may vary depending upon Product specification and customer requirement.Prices will be finalised during enquiry Product origin : Coimbatore,Tamil Nadu -India Key Specifications/Special Features : 1. Premium Efficiency with high quality materials. 2. Uniform Efficiency from 75 to 110 % load. 3. Vacuum Pressure Impregnation for stator windings 4. Low heat genertion. 5. Compact and rugged construction 6. Dynamically balanced Rotor. 7. Lower Vibration and Noise Level 8. Low operating cost. 9. Improved life cycle and short payback period. 10.Class 'F' Insulated and temperature rise limited to Class 'B'Limits 11. Motors are designed with built in service factor of 1.1 to 1.15 12. IP 44,55,56,65 protection. Minimum Order Size and Packgaing details : Minimum order Qty: 50Nos. Packing in One pallet withstanding a weight of 100 Kg HSN Code : 8501
Product Description : '"empDRIVES" make Energy Efficient AC Three Phase Squirrel Cage Induction Motor. 415V+/ 10%, 50Hz+/ 5% combined variation of 10%, S1 Duty, Class F Insulation temperature raise limited to Class B,IP: 55 Protection, TEFC Enclosure as per IS12615-2011.Motor performance attain IE2,IE3 Level Efficiency. Price of product ( USD price or FOB price) : Pricing may vary depending upon Product specification and customer requirement.Prices will be finalised during enquiry Product origin : Coimbatore,Tamil Nadu -India Key Specifications/Special Features : 1. Premium Efficiency with high quality materials. 2. Uniform Efficiency from 75 to 110 % load. 3. Vacuum Pressure Impregnation for stator windings 4. Low heat genertion. 5. Compact and rugged construction 6. Dynamically balanced Rotor. 7. Lower Vibration and Noise Level 8. Low operating cost. 9. Improved life cycle and short payback period. 10.Class 'F' Insulated and temperature rise limited to Class 'B'Limits 11. Motors are designed with built in service factor of 1.1 to 1.15 12. IP 44,55,56,65 protection. Minimum Order Size and Packgaing details : Minimum order Qty: 50Nos. Packing in One pallet withstanding a weight of 100 Kg HSN Code : 8501
Bluelight therapeutic apparatus, wellsee wind turbine, wellsee solar controller, solar inverter, automotive inverter, pure sine wave inverter, wind, solar hybrid light controller, solar inverter with built-in controller.
Product Description : 'Energy Efficient motors consumes lesser energy and efficiency level is higher than standard motors. 'empDRIVES" Energy Efficient AC Three Phase Squirrel Cage Induction Motor. 480V+/ 10%, 60Hz+/ 5% combined variation of 10%, S1 Duty, Class F Insulation temperature raise limited to Class B,IP: 55 Protection, TEFC Enclosure as per IS12615 2011.Motor performance attain IE2,IE3 Level Efficiency. Price of product ( USD price or FOB price) : Pricing may vary depending upon Product specification and customer requirement.Prices will be finalised during enquiry Product origin ; Coimbatore,Tamil Nadu -India Key Specifications/Special Features : 1. Premium Efficiency with high quality materials. 2. Uniform Efficiency from 75 to 110 % load. 3. Vacuum Pressure Impregnation for stator windings 4. Low heat genertion. 5. Compact and rugged construction 6. Dynamically balanced Rotor. 7. Lower Vibration and Noise Level 8. Low operating cost. 9. Improved life cycle and short payback period. 10.Class 'F' Insulated and temperature rise limited to Class 'B'Limits 11. Motors are designed with built in service factor of 1.1 to 1.15 12. IP 44,55,56,65 protection. Minimum Order Size and Packgaing details : Minimum order Qty: 50Nos. Packing in One pallet withstanding a weight of 100 Kg HSN Code : 8501
400w ~ 800w£¡§12v/24v£© Charge off voltage hvd 14.4v / 28.8v Low voltage directive lvd 10.8v / 21.6v Low voltage restore lvr 11.8v / 23.6v Charge loop drop £¼300mv Discharge loop drop £¼50mv Overload protection 31.5v Short-circuit protection 30a Light operate Light control on + light control off Light time control Light control on/off + time control on/off Time control classification 0.5 hours started, half an hour of one grade, up to 10 hours Output route Single bulb Ambient temperature -25¡æ¡ª¡ª+55¡æ Safe degree Ip55 Quiescent dissipation 24ma Wind turbine braking mechanism Unloading brake Control mode Solar charge/ Specification: 40pcs/carton
We have the capacity to produce wind turbine generators of 200 watts, 300w, 400w, 500w, 1000w, 2000w, 3000w, 5000w, 10kw, 20kw, 30kw. Currently, we have passed iso9001 international management system, and CE certificate. 7.5kg 690*370*225mm.
5% rated voltage Ambient temperature up to +40centigrade Installation altitude up to 1000 meters above sea level STRUCTURAL CHARACTERISTICS Dynamically balanced MOTOR SHAFT with double-shielded life-lubricated bearings(working life more than 5,000 hours). Open and self-ventilated induction MOTOR,designed for continuous duty. -The stator pack in made of low-leakage magnetic laminations(2.63 Watt/kg). -Stator windings are manufactured using wire with double class H insulation;heads carefully bound and shaped by pressure. Lmpregnation is done in a continuous cycle by PREHEATING-IMMERSION BAKING with extremely pure ideally-polyester resin, motors insulation is class B. This gives a high quality winding with excellent insulation and heat transmission properties. -The rotor is the squirrel-cage type. -The capacitor is supplied as standard. -Surface protection of the electric motor assembly is achieved by a complete treatment cycle, including rust-proofing,pickling,phosphatizing,passivation,two coat paint finish applied by and electrostatic process and oven baked. NAME PLATE showing all the main electrical and mechanical characteristics and electrical connection diagram. PROTECTION IP 23. OPERATION VOLTAGE: motors are available in stock for single-phase 230 Volt power supply. Other voltages are available on request. Motors are designed to accept maximum 5% mains voltage variations with respect to rated values. FREQUENCY: motors are available in stock for 50Hz frequency. Motors for 60Hz frequencies are available on request. Any requirements, please feel free to contact with us, we can make products according your specs and supply the competition price.
Y2 series three-phase induction motors, deveploped with new techniques, are renewal and upgrading products of Y series. Y2 series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact structure, low noise, high efficiency, large torque, excellent starting performance, easy serving, ect. The motors are adopted with F class insulation and designed with assessing method for insulation system according to intermational practice, it enhances greatly motor's safely and reliability, therefore, these motor's have reached an international advanced level of the such kind products at the initial days of the 90s. Y2 series motors can be widely used as driving equipments of various machineries, such as, machine tools, blowers, pumps, compressors, transporters, agricultural and food processing. Operating Conditions Ambient temperature: -15celsius
Sanitary centrifugal pump Performance Rate of flow: 3m3/h-60m3/h Pressure: Max working pressureí_0.45Mpa Max entrance pressure: 0.4Mpa Temperature scope: ¿C10íµ - + 140íµ Noise level: 86db Characteristics: MP centrifugal sanitary pump is a pump of single grade, single suction, semi-open impeller. With elaborate design for pump shell and impeller, the resistance is greatly reduced which makes the medium conveyed smoothly and softly. Semi-open impeller structure guarantees the best fluid power and sanitary characteristics. Inside the pump, the shaft seal situates at the best position of medium flow, which makes the seal easy to cool or wash and so to prolong the mechanical sealí»s service life. For the special structure of the pump, the whole performance of the pump is improved a lot. The smooth polished surface and non-dead corner design meet the requests of CIP/SIP, which make the pump easy to wash, therefore it could satisfy large scale of customers who have high level sanitary requests. The MP pump is characterized with easy starting, high efficiency, stable running, easy maintenance, etc. The stable starting prevents sudden pressure change, this can protect effectively piping system and its parts. The superior performance of the pump prolongs the motor service life with low noise, low vibration, high quality protection grade and insulation grade. The movable end frames could adjust height freely and it could also be installed on various brackets. Material The major material of the pump is AISI304 or AISI316L stainless steel which has low shearing force. The parts contact with medium could be treated with different choice of polishing, which ranges from sanitary polishing to super mirror surface polishing. Material Impeller: Cast totally of AISI304 or AISI316L Pump shell: Rolled totally of AISI304 or AISI316L Mechanical seal: Milestone centrifugal sanitary pump has a balance single(double) end(s) sanitary mechanical seal Shaft: Made of AISI304 or AISI316L by numerically-controlled machine tool O-ring: Silicon rubber ,fluororubber, Teflon or supply according to the requests. Surface treatment status Inside of the front and back cover, impeller are polished Outside surface is polished with mirror surface standard or treated by sandblast Motor 1.The motor is designed and made according to international standard International electrician committee IEC60034, IEC60072 Britain standard BS4999-5000 Australian standard ASI1359-2 Germany standard DIN42673 Conforms to EC í¦CEí¦mark request 2.The motor conforms to the following standards GB755 (IEC60034) GB10069 (IEC60034-9) Q/JBQS28 3.Equipped with standard wholly sealed, cold wind squirrel cage asynchronous motor, whose size conforms to IEC60034 and DIN42673. Entrance jointing methods A is ISO buckle joint B is ISO screw loose joint C is DIN screw loose joint D is SMS screw loose joint E is BS screw loose joint F is flange joint
ANEMOMETER WIND SPEED WS-5300 CA YOYIK is a well-known brand in the field of power equipment, known for its comprehensive power station equipment accessories product line and professional services. The company not only provides standard accessories, but also customizes non-standard parts according to customer specific needs to meet diversified market needs. YOYIK insists on cooperating with first-class international brands, introducing advanced technologies, and constantly improving its competitiveness to ensure that customers can enjoy high-quality products while also receiving international technical support and guarantees. Our company can provide replacement parts for various power facilities, as follows: #DF-ANEMOMETER WIND SPEED WS-5300 CA-DF Cooling fan YB3-225M-4 RSV2 trip solenoid valve Q223JO-L10 pressure relief valve YSF8-55/25-KJTA Metal sealing ring 4FK5D32M-01B-04 solenoid valve 24vdc price CCP230M VALVE NEEDLE J50C-1.6P Accumulator bladder NXQB-150/20-F-A EH fuel tank control block needle valve C156.73.52.03G01 Pressure regulating valve DBDS15GIO/2.5 Machinery Seal 3GR70Ã??2W21 600MW turbine starting oil pump (MSP)Ball bearing sleeve 70LY-34 Hexagon tube plug Q/D9403 NPT2 Leaf wheel key DG480-180-03-05 automatic gearbox for sale M2225.BGCC1 solenoid valve 8327B001 safety valve S-BSG-10-2B3A-D24-N1-46 pressure seal bonnet globe valve 80FJ-1.6PA2 Hydraulic oil station OL-DN600-000 40mm butterfly valve price K50DSF4PB3 valve SS-1KS18MM5000PSIG100F pump shaft DFB100-80-250-03 Airside seal oil pump HSG940*4-42 valve set HM131U3399412 moter CMG3160 CYLINDER QGBI FQ320X600-L3 pneumatic trip valve F3DG2S-062A-50-DFZK Seal Oil Circulation Pump Coupling Kit HSNH280-43N2 Motor MN2-250M-2TH, 55 kW, 380/660V solenoid spool valve 4659D78002 oil pump HWPVXS-130-MLDF-0000-001 Globe valve SHV25.02Z solenoid valve HQ16.10Z The electromagnetic valve D1VW006CNJW91 balance set DLZB820-R64A-8 solenoid valve J-110V-DN6-D/20B/2A High pressure oil pipe F78CD24N252016-1100 ANEMOMETER WIND SPEED WS-5300 CA ANEMOMETER WIND SPEED WS-5300 CA MY-DFYL-2024-8-1
Spherical Roller Bearing 24030C3 Inner Ring: 150.000mm Outer Ring: 225.000mm Width: 75.000mm Chamfer: 2.1mm Basic Dynamic Load Rating: 592KN Basic Static Load Rating: 1144KN Limited Speed (rpm): 1404(grease)/1902(oil) Gross Weight: 10.4kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical Roller Bearing 23072B Inner Ring: 360.000mm Outer Ring: 540.000mm Width: 134.000mm Chamfer: 5mm Basic Dynamic Load Rating: 2510KN Basic Static Load Rating: 5280KN Limited Speed (rpm): 724(grease)/952(oil) Gross Weight: 125kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication. Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K( 1:12 ) or K30 ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30). An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed W33
Spherical Roller Bearing Part No.: 23226MBC3W33 Inner Ring: 130.000mm Outer Ring: 230.000mm Width: 80.000mm Chamfer: 3 Basic Dynamic Load Rating: 725KN Basic Static Load Rating: 1160KN Limited Speed (rpm): 1404(grease)/1904(oil) Gross Weight: 15.9kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication. Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K� ( 1:12 ) or K30� ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30). An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed ?W33�.
Shutdown electromagnet DF22025 YOYIK, located in the industrial city of Deyang, Sichuan, is a leading enterprise specializing in the production of power station equipment and accessories. With its excellent manufacturing technology and strict quality management system, it has won wide acclaim in the domestic and foreign markets. The company not only provides key components of traditional power generation equipment such as turbines and generators, but also keeps pace with the times and actively develops products that adapt to new energy trends, such as wind power generation and solar power generation system accessories, and is committed to providing diversified solutions for the global energy industry. Here are many spare parts options we can provide for power plants: #DF-Shutdown electromagnet DF22025-DF sealing oilVacuum pump reducer ZF108-K4-160 Van solenoid 22FDA-K2T-W110R-20/LV throttle valve NV1-8-S-0 EH oil cooling recirculation pump F3-V10-1S6S-1C20 MT80 mechanical seal A106-45 Fluorine rubber sealing ring HY-SO-0009-V chloroprene rubber square bar 10*20 O-ring HZB253-640-01-02 HPCV servo valve 563JOGA4VPL Gas supply device WLHDZZ-QIJG-300 VLV, OVR FLW DSC-RDDA-LAN Accumulator NXQAB-32/10-E-Y Seal oil for vacuum pump WS-30-7B Jet pipe Electro-hydraulic servo valve 730-4185B The electromagnetic valve D1VW020HVZPM582XB510 Rubber sealing ring HB4-56-J8-113 normally closed solenoid 300AA00086A Membrane check valve GMVO pressure hose SMS-15/N1/4-915mm-C Servo Valves for Turbine Governors 072K4160 jacking oil pump purpose A10VS0100DR13/31R-PPA pressure relief valve YSF9-25/25-TH O type Seal ring HB4-56J8-183 Van solenoid 22FDA-F5T-W110R-20/LBO Accumulator bladder NXQB-25/20-E-E mechanical hydraulic servo valve SM4-40(40)151-80/40-10-H919H Pump mechanical seal ACF090N4 metal shut off valve 50FJ1.6P oil cooler GLC3-5 changeover valve SCU03 Generator radial bearing NU1030ML Shutdown electromagnet DF22025 Shutdown electromagnet DF22025 MY-DFYL-2024-8-1
Seal wiper 20 shaft 4Pcs M3334 YOYIK, located in the industrial city of Deyang, Sichuan, is a leading enterprise specializing in the production of power station equipment and accessories. With its excellent manufacturing technology and strict quality management system, it has won wide acclaim in the domestic and foreign markets. The company not only provides key components of traditional power generation equipment such as turbines and generators, but also keeps pace with the times and actively develops products that adapt to new energy trends, such as wind power generation and solar power generation system accessories, and is committed to providing diversified solutions for the global energy industry. Here are many spare parts options we can provide for power plants: #DF-Seal wiper 20 shaft 4Pcs M3334-DF sealing oil Vacuum pump reducer ZF108-K4-160 Van solenoid 22FDA-K2T-W110R-20/LV throttle valve NV1-8-S-0 EH oil cooling recirculation pump F3-V10-1S6S-1C20 MT80 mechanical seal A106-45 Fluorine rubber sealing ring HY-SO-0009-V chloroprene rubber square bar 10*20 O-ring HZB253-640-01-02 HPCV servo valve 563JOGA4VPL Gas supply device WLHDZZ-QIJG-300 VLV, OVR FLW DSC-RDDA-LAN Accumulator NXQAB-32/10-E-Y Seal oil for vacuum pump WS-30-7B Jet pipe Electro-hydraulic servo valve 730-4185B The electromagnetic valve D1VW020HVZPM582XB510 Rubber sealing ring HB4-56-J8-113 normally closed solenoid 300AA00086A Membrane check valve GMVO pressure hose SMS-15/N1/4-915mm-C Servo Valves for Turbine Governors 072K4160 jacking oil pump purpose A10VS0100DR13/31R-PPA pressure relief valve YSF9-25/25-TH O type Seal ring HB4-56J8-183 Van solenoid 22FDA-F5T-W110R-20/LBO Accumulator bladder NXQB-25/20-E-E mechanical hydraulic servo valve SM4-40(40)151-80/40-10-H919H Pump mechanical seal ACF090N4 metal shut off valve 50FJ1.6P oil cooler GLC3-5 changeover valve SCU03 Generator radial bearing NU1030ML Seal wiper Ã?? 20 shaft 4Pcs M3334 Seal wiper 20 shaft 4Pcs M3334 MY-DFYL-2024-7-31
high pressure globe valve WJ50-F1.6P for Mahanadi power YOYIK, located in the industrial city of Deyang, Sichuan, is a leading enterprise specializing in the production of power station equipment and accessories. With its excellent manufacturing technology and strict quality management system, it has won wide acclaim in the domestic and foreign markets. The company not only provides key components of traditional power generation equipment such as turbines and generators, but also keeps pace with the times and actively develops products that adapt to new energy trends, such as wind power generation and solar power generation system accessories, and is committed to providing diversified solutions for the global energy industry. #DF-high pressure globe valve WJ50-F1.6P-DF sealing oilVacuum pump reducer ZF108-K4-160 Van solenoid 22FDA-K2T-W110R-20/LV throttle valve NV1-8-S-0 EH oil cooling recirculation pump F3-V10-1S6S-1C20 MT80 mechanical seal A106-45 Fluorine rubber sealing ring HY-SO-0009-V chloroprene rubber square bar 10*20 O-ring HZB253-640-01-02 HPCV servo valve 563JOGA4VPL Gas supply device WLHDZZ-QIJG-300 VLV, OVR FLW DSC-RDDA-LAN Accumulator NXQAB-32/10-E-Y Seal oil for vacuum pump WS-30-7B Jet pipe Electro-hydraulic servo valve 730-4185B The electromagnetic valve D1VW020HVZPM582XB510 Rubber sealing ring HB4-56-J8-113 normally closed solenoid 300AA00086A Membrane check valve GMVO pressure hose SMS-15/N1/4-915mm-C Servo Valves for Turbine Governors 072K4160 jacking oil pump purpose A10VS0100DR13/31R-PPA pressure relief valve YSF9-25/25-TH O type Seal ring HB4-56J8-183 Van solenoid 22FDA-F5T-W110R-20/LBO Accumulator bladder NXQB-25/20-E-E mechanical hydraulic servo valve SM4-40(40)151-80/40-10-H919H Pump mechanical seal ACF090N4 metal shut off valve 50FJ1.6P oil cooler GLC3-5 changeover valve SCU03 Generator radial bearing NU1030ML high pressure globe valve WJ50-F1.6P high pressure globe valve WJ50-F1.6P MY-DFYL-2024-7-2
Induction brazing is a process that uses induction heating to join two or more metals. Induction heating uses an electromagnetic field to provide heat without contact or flame. Induction brazing is more localized, repeatable and easier to automate than traditional torch brazing. Induction brazing has been around for a long time, but is only now becoming widely available due to advances in induction heating power sources. The principle of induction brazing is similar to that of a transformer, where the inductor is the primary winding and the heated part acts as a single-turn secondary winding. Solutions for induction brazing of workpieces using Copper and copper alloys Brass Aluminum Iron Steel, stainless steel and all types of carbide Tungsten Chromium Nickel and nickel alloys Cobalt and precious metals Dissimilar metal brazing applications Common applications for induction brazing New applications for induction brazing are discovered every day, but here is a list of common induction brazing applications. Back-bending brazing using induction heating equipment. Brazing copper heat transfer tubes Brazing copper heat exchanger tubes in refrigeration units and custom trucks Multi-strand brazed flat copper wire and squirrel cage rotors for motor and transformer manufacturing Brazed busbars Brazed brass threaded fittings in various piping systems Brazed carbide pins for road construction Carbide blade fabrication Steel pipe assemblies Large motor and transformer repair, such as wind turbines, hydro turbines, nuclear transformers, mining equipment and agricultural equipment Electric and hybrid vehicle manufacturing Medical device manufacturing The benefits of induction heating for brazing Induction brazing offers many advantages over flame brazing or furnace brazing. This short list may cause you to reconsider your current manufacturing process:. Faster production More precise brazing Create superior joints with consistent heat Easily set up reproducible processes Improve energy efficiency and reduce utility costs Improve worker safety Reduce downtime Improves equipment reliability
Salient Features Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor It also works on Low Voltage Easy installation and easy Servicing MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire HP 0.5 HP to 2.0 HP HEAD 6 Mtrs to 28 Mtrs CAPACITY 25: 550 LPM VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 24 Nos. HP 0.5 HP to 25 HP HEAD 6 Mtrs to 86 Mtrs CAPACITY 25: 2100 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 53 Nos.
HD2500 high pressure raymond grinding mill Specifications: Ring diameter: 2500mm Roller size: 600*300 mm Center speed: 70 r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300 mm Total weight: 75t Advantages: The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features : 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�?Patent product is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD 2500 specifications: Ring diameter: 2500 mm Roller size: 600*300mm Center speed: 70r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300mm Total weight: 75ton Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.