Sanitary centrifugal pump
Performance
Rate of flow: 3m3/h-60m3/h
Pressure: Max working pressureí_0.45Mpa
Max entrance pressure: 0.4Mpa
Temperature scope: ¿C10íµ - + 140íµ
Noise level: 86db
Characteristics:
MP centrifugal sanitary pump is a pump of single grade, single suction, semi-open impeller. With elaborate design for pump shell and impeller, the resistance is greatly reduced which makes the medium conveyed smoothly and softly.
Semi-open impeller structure guarantees the best fluid power and sanitary characteristics.
Inside the pump, the shaft seal situates at the best position of medium flow, which makes the seal easy to cool or wash and so to prolong the mechanical sealí»s service life.
For the special structure of the pump, the whole performance of the pump is improved a lot. The smooth polished surface and non-dead corner design meet the requests of CIP/SIP, which make the pump easy to wash, therefore it could satisfy large scale of customers who have high level sanitary requests.
The MP pump is characterized with easy starting, high efficiency, stable running, easy maintenance, etc.
The stable starting prevents sudden pressure change, this can protect effectively piping system and its parts.
The superior performance of the pump prolongs the motor service life with low noise, low vibration, high quality protection grade and insulation grade.
The movable end frames could adjust height freely and it could also be installed on various brackets.
Material
The major material of the pump is AISI304 or AISI316L stainless steel which has low shearing force. The parts contact with medium could be treated with different choice of polishing, which ranges from sanitary polishing to super mirror surface polishing.
Material
Impeller: Cast totally of AISI304 or AISI316L
Pump shell: Rolled totally of AISI304 or AISI316L
Mechanical seal: Milestone centrifugal sanitary pump has a balance single(double) end(s) sanitary mechanical seal
Shaft: Made of AISI304 or AISI316L by numerically-controlled machine tool
O-ring: Silicon rubber ,fluororubber, Teflon or supply according to the requests.
Surface treatment status
Inside of the front and back cover, impeller are polished
Outside surface is polished with mirror surface standard or treated by sandblast
Motor
1.The motor is designed and made according to international standard
International electrician committee IEC60034, IEC60072
Britain standard BS4999-5000
Australian standard ASI1359-2
Germany standard DIN42673
Conforms to EC í¦CEí¦mark request
2.The motor conforms to the following standards
GB755 (IEC60034)
GB10069 (IEC60034-9)
Q/JBQS28
3.Equipped with standard wholly sealed, cold wind squirrel cage asynchronous motor, whose size conforms to IEC60034 and DIN42673.
Entrance jointing methods
A is ISO buckle joint
B is ISO screw loose joint
C is DIN screw loose joint
D is SMS screw loose joint
E is BS screw loose joint
F is flange joint
Stainless Steel hygienic food grade Milk exprosion-proof ABB Motor Centrifugal sanitary Pump Technical Parameter [Spec]: 3T-180T,6m-60m , 0.55KW-75KW [Material]: SUS304 SUS316L, The pump body, pump cover and impeller contact with medium made of SUS316L, SUS304. [Standards]: 3A,SMS,ISO,IDF,BS,RJT [Impeller]: Open type impeller, there is no blind corner. close type impeller, semi-open type impeller [Operate condition]: Sanitary centrifugal pump is close to HORIZONTAL transport of high and low level, is not the Self-priming type. [Surface treatment]: The part contact with mdedium is Polished, And other part is Sand Blasted [Max inlet pressure]: 0.5MPa [Temperature range]: -10 to Degree +140 Degree(EPDM) [Flushable mechanical sealing: ] Water pressure: __Max 0.1MPa Water lift: _______0.25-0.5L/min Flow (Ton) per hour Unit (SS304 explosion proof ABB motor) Unit(SS316L ABB explosion proof Motor Motor made in Chian ss304/316L) Inlet/Outlet(mm) Lift(Meter) 1T(0.55KW) 300 330 260/300 32/25 15 3T(0.75KW) 350 350 315/350 38/32 20 5T(1.5KW) 500 550 450/500 51/38 25 10T(2.2KW) 550 600 500/550 51/38 25/32 15T(3KW) 750 800 670/735 51/51 32/42 20T(4KW) 780 850 720/780 51/51 36/52 .............................................150Tons per hour the biggest one we can produce. [Motor]: 1. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electronically CommissionIEC60034. IEC60072 standard design comply with European "CE" Marking requirements 2. The Explosion-Proof motor also available, that can meet with the requirement of different Applications. 3...It has excellent electric performance, low noise and low vibration. The protection grade is IP55, insulation grade is F. 4. Operate in voltage: ≤ 3Kw, 220-240V/380-420V, Δ /Y > 3Kw, 380-420V/660-690V, Δ /Y 5. Frequency: _________50Hz/60Hz 6. Working method: ____Continuous(SI) 7. Rotate speed: ______The standard rotate speed is 2900r/min PS: Performance curve could be provided~ ONEMOSS is specialized in Manufacturing Sanitary Pumps Sanitary Valves Sanitary Pipe fittings etc. , which can be widely used in food, beer, beverage, dairy products, cosmetic, pharmacy and biology engineering field. For that our products will be applied in the fluid systems with strict sanitary and sterilizing requirement, so we do have many strict tests for our products, such as the performance curve test of pumps, frequency curve, the smooth and clean test, pressure test and so on.
High Efficiency Centrifugal Pump featureï¼? With simple structure, easy dismount, adjustable foot height, vibration proof device, low noises, high efficiency, long term normal operation, easy maintenance, gentle and tender treatment, this sanitary centrifugal pump is your ideal choice. It complies with food sanitary standard and guarantees original taste of your products. Applications Milk centrifugal pump mainly used for food industry such as milk, beverange, beer and high pressure delivery. Parameter ModelFlow rate(L/H)Lift(m)Caliber(mm)Rotation speed(RPM)Power(Kw) SCP-1-1010001032/2529000.55 SCP-3-1630001640/3229000.75 SCP-5-245000244029001.5 SCP-5-325000324029002.2 SCP-10-24100002450/4029002.2 SCP-10-36100003650/4029003 SCP-20-2420000245029004 SCP-20-3620000365029005.5 SCP-30-24300002465/5029005.5 SCP-30-36300003665/5029007.5 SCP-40-36400003680/6529007.5 SCP-50-40500004080/65290011
Design Features: Horizontal, Centrifugal, Free Shaft Extension Pump fitted with single stage closed Impeller in Volute Casing having axial end suction and vertical centerline delivery. In-corporating Back-Pull-Out facility. Custom-built Design: Pumps with different operating speed / material of construction / temperature can be offered on request.
Supplier: Industrial pumps, lobe pumps, sanitary lobe pumps, aodd pumps, centrifugal pumps in plastic & metal, magdrive pumps, vertical sump pumps, sanitary valves
Services:
Single & multistage chemical process pumps. Contact us for detailed description. as per pump requirements.
Centrifugal Pumps
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
