THINTEXOTM-Modified Starch Low viscosity modified starch for warp yarn sizing SPECIFICATIONS Appearance : off white to cream colour fine free flowing powder Solubility : Insoluble in cold water pH value( 15 % aqu. soln) : 5 to 7 Viscosity of 15% soln : Max 60 cPs (Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc) LVDV II+ pro) Moisture content (w/w) : Max 13% Ash content (w/w) : Max 0.5% Sieve Retention (60 Mesh) : Max 1% Bulk density (gm/ml) : 0.45 to 0.55 SPECIAL FEATURES : Constant viscosity. Optimum penetration & film formation. Better flexible film . Easily de sizable product . Warp- break reducer. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY - Stable for one year from the date of manufacture PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
APPLICATIONS IN JELLY AND CANDIES: Moulding starch will absorb the moisture of jelly and helps to dry the jelly in a short period of time.Moulding Starch will also enhance tray printing by reducing starch adhesion to the mould and ensuring that shape is retained prior to depositing. The mould formed during the production of jelly with moulding starch has a very low tendency to disperse and keep its shape. Moulding Starch acts as a replacement for Gelatine and reduces the holding time and will gives a taffy and smooth texture to the candy. Moulding starch offers low hot viscosity when cooked and rapid gelling when cooled
APPLICATIONS IN JELLY AND CANDIES: Moulding starch will absorb the moisture of jelly and helps to dry the jelly in a short period of time.Moulding Starch will also enhance tray printing by reducing starch adhesion to the mould and ensuring that shape is retained prior to depositing. The mould formed during the production of jelly with moulding starch has a very low tendency to disperse and keep its shape. Moulding Starch acts as a replacement for Gelatine and reduces the holding time and will gives a taffy and smooth texture to the candy. Moulding starch offers low hot viscosity when cooked and rapid gelling when cooled
APPLICATIONS IN JELLY AND CANDIES: Moulding starch will absorb the moisture of jelly and helps to dry the jelly in a short period of time.Moulding Starch will also enhance tray printing by reducing starch adhesion to the mould and ensuring that shape is retained prior to depositing. The mould formed during the production of jelly with moulding starch has a very low tendency to disperse and keep its shape. Moulding Starch acts as a replacement for Gelatine and reduces the holding time and will gives a taffy and smooth texture to the candy. Moulding starch offers low hot viscosity when cooked and rapid gelling when cooled
APPLICATIONS IN JELLY AND CANDIES: Moulding starch will absorb the moisture of jelly and helps to dry the jelly in a short period of time . Moulding Starch will also enhance tray printing by reducing starch adhesion to the mould and ensuring that shape is retained prior to depositing. The mould formed during the production of jelly with moulding starch has a very low tendency to disperse and keep its shape. Moulding Starch acts as a replacement for Gelatine and reduces the holding time and will give a taffy and smooth texture to the candy. Moulding starch offers low hot viscosity when cooked and rapid gelling when cooled
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS Oxidized starch is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., Oxidized starch can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness Oxidized starch is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, Oxidized starch expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS Oxidized starch is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. Oxidized starches are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS Oxidized starch has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. Oxidized starch is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). FUNCTIONAL PROPERTIES Oxidized starch forms highly thixotropic pastes with stiff texture, which is related to its gelling capability Low gelatinization temperature and viscosity, clarity, and soft gel texture are attributes of oxidized starch used in breading and related applications When heated in water, Oxidized starch form clear fluid sols. On cooling, however, the sols made by cooking oxidized starch are more stable or resistant to thickening and forming gels or pastes Oxidized starch is used in formulated products. They also are used in starch batters and in breaded foods, where they improve adhesion of the batter to meat and fish Gum confections made with oxidized starch have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying Used in batters and breading for coating various food stuffs, in confectionery as binders and film formers, in dairy products as texturizers Oxidized starch is often used for coating, sealing, batter binding, emulsification, and dough conditioning in baking and other food products.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Our canned tunna fish process line machine high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating .ï¼?also for sardine fish canned production line ) Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .
Our canned salmon fish process line machine high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .
Canned sardine fish process line high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .
Our canned fish process line high degree of automation, stable and reliable work, a complete set of control adopts by famous brand control system ,save labors ,sanitary operating . Canned fish process line production line machine Processing : Fish Raw material acceptance ------- raw material processing(remove head and tail,evisceration) ------saline -----filling can ------- dewater ------filling ingredients juice ------vacuum sealing can -------sterilization -------cooling -------insulation test -------outside packing ------finished products .Accordong to customer inquired to design canned fish process line and customized with customer's Budget or investment . (also offer canned fruit process line production line machine ,also can design canned fruit process line ) . Offer customer after-sale service .
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
LLDPE Reprocessed Transparent Color For Sales MATERIAL : LLDPE reprocessed transparent color CATEGORY : LLDPE TYPE : Reprocessed GRADE : Transparent color SPECIFICATION : First grade reprocessed LLDPE natural color filled in seperate bags. LLdpe - MFI 0.92 equal to virgin film grade Natural 80MT ORIGIN : New Zealand LOADING WEIGHT : 20 Tons FAS (USD/Ton) : 1000-1200
Laminated glass is one kind of safety glass, and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage. Sentryglas plus (SGP ) laminated glass ,0.89mm/1.52mm/2.28mm The main character: Stronger Performance : SGP glass is five times harder than PVB laminated glass, SGP film can let glass keep the shape ,without fall down.� SGP is suitable to use in stairs, flooring and overhead glazing, laminated glass , with outstanding post-breakage resistance to creep and collapse. Higher Transparence:� SGP film yellow index is only 10-25% of clear PVB ,it is best choice for low iron laminated glass process. Flexible UV option : SGP is good at both UV transmitting option and as traditional UV blocking interlayer. ,it can be made in a specialty, high-UV transmittance sheet, extremely useful when designing controlled environments for many life species .
Car front seat organizer. It is specifically used to store documents, portfolios, books, laptops, marker pens, signature pens and other work materials that you need to work at any time. Allows you to easily find the documents you need while keeping the environment in the car neat and tidy. Large capacity front seat car organizer width 33.5x43 cm height, which can accommodate notebooks, 14 inch laptop, 1 marker, four signature pens, hand sanitizer, 2 umbrellas or water glasses and other commonly used items. Both sides are equipped with buckles to expand the capacity, allowing you to flexibly adjust the capacity of the storage bag to the number of items stored. Separate laptop compartment. The front seat organizer of the car has a separate laptop compartment filled with EPE material of sufficient thickness. To prevent scratching of the computer, the inner compartment is made of soft suede material. High-quality workmanship. The storage bag for the front seat is made of high-quality 600D polyester, which is dustproof, wear-resistant and shiny. An X-shaped reinforcement sewing method is used on the handle connection, which has a strong support force and avoids tearing due to continuous winding. We use high quality thick metal zipper, smooth and not easy to damage. Double fastening straps always remain stable. To prevent the storage bag from shaking or dropping items while driving, the storage bag is equipped with two adjustable fastening straps. Installation method: Step 1: Simply install the short belt on the headrest, Step 2: Wrap the long belt around the back of the car seat to attach it.
