The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine. Fixed blade turbines are very well suited to low head power plants with limited variation in head and load. Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow. Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load. Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
The tubular turbine is an axial flow turbine, in a straight or S-shaped configuration. A Tubular Turbine can be supplied for a head of 2 m to 30 m. The runner diameter is available from 0.8 m to 5.6 m. Power capacity is from 250 kW to 15 MW. This turbine has high efficiency and lower constructon cost.
Pelton turbine The runner has bucket shaped blades on the periphery. The jet of water is tangential to the runner. The characteristics are, high head applications, a simple design, few problems with cavitation, highly cost effective. Pelton turbines can be supplied for a head of 100m to 500 m. The runner diameter is available from 0.55 m to 1.5 m. Power capacity is from 200 kW to 10 MW. Inclined jet turbine: The water flows into and out of the runner at an angle to the main shaft. The characteristics are high efficiency over a wide range of water flow, more flexible installation options, somewhat more complex than a Pelton turbine. Inclined jet turbines can be supplied for a head of 60m to 300 m. The runner diameter is available from 0.32 m to 0.8 m. Power capacity is from 55 kW to 6.3 MW.
In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency. A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW. New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.
Francis turbine, kaplan turbine, pelton turbine, turgo turbine, bulb turbine, gate valve, butterfly valve, ball valve, synchro generator, excitation system, electric and control system. No
Proven reliability and high efficiency makes Kessels multi-stage steam turbines vital partners with the power and process industries. High fuel and energy conversion costs demand that steam turbine efficiency be as much a consideration as reliability. Kessels industrial multi-stage steam turbine line helps you meet a variety of energy requirements in industrial environments. These turbines operate at speeds up to 12,000 RPM, with steam inlet conditions up to 105 bar at 560oC, and exhaust conditions up to 12 bar.
The condensing turbines take high pressure steam, expand it in turbine nozzles and blades, and exhaust it to a condenser at lower than atmospheric pressure. It is principally used when power must be generated with minimum steam consumption. The condensing turbine may also have bleed points (uncontrolled extractions) to satisfy steam e. These type of turbines find application mainly for power generation where bleed steam is required for feed water heating (hp heater, lp heater and deaerator requirement) and / or where bleed steam is utilized to meet small process demands.
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields. MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ. It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain. It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others. Our wind generator' main parameters and sizes are as follows: 1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind 2 Leaf Blade Pattern: Propeller 3 Leaf Blade Number: 3 pieces 4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m. 5 Rated Speed: 160----400 revolutions/Minute, 6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW 7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V 8 Matches the accumulator cell: 480V, 9 Starting Wind Speed: 3.0 meters/ Second 10 Design Wind Speed: 8~ 9 meters/ Second 11 Operating Region: 3~20 rice/ Second 12 Hand of Rotation: Clockwise (face wind wheel) 13 The Wind cans the utilization factor: 0.4 14 High Speed Ratios: 6: 1 to 8: 1 15 Velocity Modulation Way: Leaning tail + electric brake 16 Sets Up an Altitude: 6-9meters Place of Origin: Qingdao, Shandong, China. Availability size: Based on the customer's requirements. Fabrication: Based on the customer's requirements and other technical data agreed by both parties. Package: packed with wooden case Terms of Payment: L/C, T/T Minimum Order Quantity: 1sets Port of Loading: Qingdao Port Delivery Time: one month or based on the customer's needs. Export standard package or as per client
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
Hydraulic turbines.
Steam turbines.
Gas turbines.
150w, 300w, 600w, 1kw, 2kw, 3kw, 5kw.10kw, 20kw, 30kw, 50kw, 100kw.
Power: 50W Rotor diameter: 700mm Height of blades: 600m Material of blades: Glass Fiber Reinforced Plastic Number of blades: 5 Rated rotor speed: 120r/min Rated wind speed: 7-10m/s Start-up wind speed: 1.3m/s Work wind speed: 1.3-25m/s Survival wind speed: 50m/s Output voltage: AC12V Packing size: 660, 350, 280mm Weight: 15KG.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
250KW Wind turbines.
PV panels from 40W to 300w Wind Turbine from 200w to 3 kva Modified & sine wave inverters. Standard export package.
Product information Model: 2kw H-3.8-2kw small wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. All of the wind generators are matched with wind-solar hybrid inverter controller, which can connect solar panel within 1000w simultaneously. Please contact us for the detail. The off-grid small wind turbine generator is matched with 10pcs 12vdc batteries in series, and on-grid system can connect to state grid. Fuse parameters of batteries and solar panels are 500v, 30a. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power++w++ 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter++m++ 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0~370 Generator efficiency >0.8 Tower diameter(mm) ++118x4 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs
We are a renown manufacturer of wind turbine with nearly 30 years his in china. Technology: pitch controlled. No notily.
Horizontal axis wind turbine technical parameter 2000w Performance Rotor diameter 3.2m noise test report Blades quantity 3 pcs wind speed(m/s) noise(db) Direction always downwind 3 24.6 Blades material glass fiber 4 24.8 Rated output 2000w 5 29.5 Maximum output 2500w 6 35.2 Initial voltage 96v 7 40.7 Initial wind speed(m/s) 3m/s 8 48.2 Nominal wind speed(m/s) 9m/s 9 52.6 Stormstand up to 35m/s 10 61.8 Wind protection autofurl 11 65.8 Rotor speed 280 r/min 12 70.5 Wind turbine type pmg (on constant magnets) remark 1.Noise report (tested by hand held sound level meter) 2.Test position at 12m away from generator (average value of 3 point-rear, left, right). 3.The noise value includes wind noise. Working temperature from -40 to +60 c Total capacity(one year) 5000kwh Charge control automatic intelligent control Recommended battery 12v150ah 8pc Batteries full charged about 10 hours Weight(kg) 55kgs (without tower) Packing detail Packing name quatity weight(kg) packing size(mm) packing Generator 1 54.5 660*415*400 plywood box Controller+ inverter (dc96v, ac220v) 1 44.5 650*480*490 plywood box Tower 1 93 3100*320*320 nude Fittings 1 58 660*450*240 plywood box Blades 1 33.5 1640*220*290 plywood box Total 283.5kg 0.76cbm.
