1. Tungsten wire tungsten Filament: tungsten wire in spool Model NO.: KK Type: Tungsten Wire Material: W-1 Purity: 99.95%Min. Melting Point: 3410 Ceiclus Boiling Point: 5927 Ceiclus Density: 19.2g/cm3 Diameter: 0.01-2.00mm Surface: Black and Cleaned Export Markets: Global 2. Dimensions and Tolerances of tungsten wire: Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire. The standard diameter tolerance is: � 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product. Specification: Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm Big heater element Small heater element 0.4-3.0 1 0.3 0.4-1.0 1 0.3 0.4-1.3 1 0.3 0.4-1.0 2 1 0.3 0.4-1.0 1 0.3 0.4-1.0 several stranded coils 0.3 Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire. 3. Straightness of tungsten wire: Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases. 4. Quality and Finish: Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching. 5. Products Feature: 1. Excellent Conductivity 2. Resistance of high temperature. 3. Abrasion and Erosion. 4. Suitable for making heating wires. 5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage.
Tungsten rod specifications: Grade: W-1 Purity: 99.95% Appearance: Shine with grey or dark grey metallic luster. Application: Mainly used to found ingredient of material, cutter and heads, tungsten wire for lights instruments and conductor of heat, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistant steel, mainly used to guns, artillery, rockets, satellite, airplane and ship. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion. Composition: Grade Tungsten content Contents of Impurity Elements Total Content Content of each element W1 99.95%min 0.05%max 0.01%max W2 99.92%min 0.08%max 0.01%max Dimension: Diameter(mm) Length(mm) 2-10 2500 10-30 2000 30-60 1500 60-100 1000 100-200 600 Technical process: Tungsten Powder Isostatic Pressing Bar Billet Sinering Semi-finished bar Forging Swaging Polished End products Inspection Packing
Application Metallizing, Electron-beam Spraying ,sinteting annealing in reducing atmosphere in electronics. Military and light industries Evaporate small lengths of wire or to evaporate materials. Tungsten boat is ideal for use in small evaporation systems. Tungsten boats sources are used for the vacuum evaporation of materials. Features Metallizing, Electron-beam Spraying ,sinteting annealing in reducing atmosphere in electronics. Military and light industries Evaporate small lengths of wire or to evaporate materials. Tungsten boat is ideal for use in small evaporation systems. Tungsten boats sources are used for the vacuum evaporation of materials. We can supply pure tungsten boat, molybdenum boat, tantalum boat and so on, Customized products can be supply, according to drawing, Special requirements to be agreed upon by the supplier and buyer.
Product name: black pure tungsten wire Purity: â?¥99.95% Density: 19.2g/cm3 Diameter: 0.03-3mm Surface finish: alkaline/black Quality standard: ISO 9001 Tungsten wire application: Tungsten wire mainly used for making heating wires, twisted wires for coating films under vacuum, also used as electrical lig. The diameter can be customized as requirement,different application,our processing way will be different.
Tungsten W catalyst. Based on Assay - with 14-15% W and 3,5-4,5% Ni - in barrels about 18-20 tons - fine granules, about 2cm in length - notification can be done if needed. - Origin EU, loading port EU Port
Tungsten rhenium wire(WRe wire) is an alloy wire formed with tungsten and rhenium metals. Tungsten rhenium wire has a lot of advantages such as high strength in room and high temperature, good ductility after recrystallization, large resistivity, low coefficient of resistance, resistant to oxidation and carbonization, anti-"water cycle response" ability and welding performance. In recent years, tungsten rhenium wire are widely exported to Taiwan, Japan, Korea, Russia , Ukraine and other countries because of the sapphire of single crystal growth, so WRe25 (tungsten 75%--Rhenium 25%) with diameter of 0.5mm is the most commonly used . All tungsten rhenium wire is packaged per reel. 400g or 500g per reel. 250-260m per kilograms.
Tungsten rhenium wire(WRe wire) is an alloy wire formed with tungsten and rhenium metals. Tungsten rhenium wire has a lot of advantages such as high strength in room and high temperature, good ductility after recrystallization, large resistivity, low coefficient of resistance, resistant to oxidation and carbonization, anti-"water cycle response" ability and welding performance In recent years, tungsten rhenium wire are widely exported to Taiwan, Japan, Korea, Russia , Ukraine and other countries because of the sapphire of single crystal growth, so WRe25 (tungsten 75%--Rhenium 25%) with diameter of 0.5mm is the most commonly used . Diameter: 0.5mm 400g or 500g per reel. 250-260m per kilograms.
Grade NoISO code Density g/cm3Hardness HRATRS MPA N/mm2 SK6XK101.7-15.191.5-921800-1950 SK8K2014.5-14.989-89.52000-2300 SK10XK20-K3014.4-14.790.5-912200-2400 SK15K4013.9-14.287-87.52400-2600 SK10TK05-K1014.6-15.092.3-92.71800-2000 Wooden box
W-Re series wire is tungsten-rhenium wire, which have unique quality because of its ductility compared to pure tungsten wire. Tungsten-rhenium (W-Re) maintains a much greater ductility due to its rhenium content. Multicrystal has its own technology to make a homogeneous alloy of rhenium and tungsten, and to work them to be various diameter sizes. Tungsten-rhenium wires have greater electric resistance than pure tungsten wires. In addition, they have unique mechanical properties. These electric and mechanical properties vary according to the rhenium content. Multicrystal prepares every kind of rhenium tungsten material to meet customer requests. Our tungsten-rhenium (W-Re) products are offered in rod, bar and wire.
FW & HW two series tungsten wires both are doped with Potassium (K), Silicon (Si), Aluminum (Al), which have a good reputation with customers both domestic and overseas. FW series wire is our standard non-sag, high quality, and characterized by long grain recrystallized, especially good for high speed coiling. As the raw materials, FW wire is often used to be filaments for fluorescent lamp. HW series wire excels in high temperature vibration resistance and anti-blackening property. It varies from a standard non-sagging wire, which is developed especially for halogen lamp filament by our original production control. We produce these wires via a technology well established by some experts' experience and knowledge of customers needs. We also undertake consignment processing on customer's request, such as heavy tungsten wire for redraw.
Tungsten Alloy metals are mainly including W-Ni-Fe and W-Ni-Cu, are extensively used in military equipment, mechanical manufacturing, aircraft components, medical shields and sports equipment. WNiFe/WNiCu tungsten heavy tungsten heavy alloy WNiFe tungsten nickel ferro/iron alloy. W-Ni-Fe alloy is used in collimator and shielding components to provide protection against X-ray and �³-ray radiation. A product manufactured from tungsten, nickel and copper, is distinctive due to its non-magnetic behavior. This material is used in the places to avoid magnetic interference.
Description: By selecting high purity tungsten powder and oxygen-free copper, all of our tungsten coppers are produced by sintering and infiltrating process. 1. The composition of tungsten and copper are well-proportioned and accurate percentaged; 2. Tungsten coppers are precisely machined with high thermo stability, high arc resistance and high strength; 3. Copper tungstgen has high electrical conductivity and thermal conductivity; Application 1. Our tungsten copper is widely used in many industrial areas such as aerospace, power, electronic, metallurgy, and machinery; 2. It is also used for cooling device in electronic equipment; 3. Tungsten copper is also adopted as electrodes in resistance welding machine; 4. Arcing contacts and vacuum contacts in high and medium voltage breakers or vacuum interrupters adopt it as material; 5. It is adopted as passive cooling element in heat sink for electronic devices and electronic packaging materials; 6. Copper tungsten can be used as the component of the pushing device in spacecrafts.
Product name: Molybdenum Bar Standard: ASTM B387 Material: Mo >99.95% Density: 10.2g/cc Application: Molybdenum bar is mainly used in drawing thin molybdenum wire, molybdenum electrode and steel-making additives. Meanwhile, molybdenum bar is also widely used in the furnace industry for radiation screens, elements, and sintering trays Surface Finish: Black Surface- Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides. Cleaned- Surface is chemically cleaned to remove all lubricants and oxides. Shiny finish- Surface is lathe shinny or polished. Specification: Molybdenum round bar is manufactured as random length pieces or cut to customers' desired lengths in diameters ranging from 0.080 inches to 6.00 inches.Below are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of molybdenum bar that you require, please feel free to contact us. It is used for smelting of rare earth metals, heating elements of induction furnace, heating elements of rare earth metals, smelting of quartz, glass and for high-temperature containers. Tungsten crucible is used in high temperature vessels for smelting of rare earth metals.
Tungsten wire is used as vacumme material. Tungsten filament is applied as evaporator(heating element)in the vacuum metalizing Twisted tungsten wires are made of selected high quality material of tungsten,with the properties of excellent thermal conductivity,finely processed,and long duration. Usually twisted tungsten filament are used as evaporator (heating element) in the vacuum metalllizing(evaporation) process to coat thin film on surface of mirrors,kinescope,toys,home appliance,machine and various decoration,etc. Grade:JT88 Diameter:ª¦0.55--2.0mm Number of strands:1--10 (strands). We can produce the products according to the customers'drawing or sample. Attached labels indicate detailed production information Reeled on spools, Pack in cartons or cases or according to customers' requirements
Tungsten bar It can be used as high-temperature heat source and high-temperature structure accessory. Main applications: Manufacture electric light source and electric vacuum accessory. It can be used for make electrical contact.For stirring purposes in rare earth metals smelting and for making tungsten contacts and parts in electrical light sources making. Tungsten's unique properties, including a melting point of 3410ípc, low vapor pressure at elevated temperatures and low coefficient of thermal expansion, make it of value in a variety of high temperature products and processes Among them are glass-to-metal seal parts and support parts for lighting and electronics, silicon rectifier stud mounts and high temperature furnace components. Sifon produces pure and potassium doped (wk type) tungsten rod The potassium doped products is targeted for use where high temperature non-sag properties are required in smaller cross sections by the lighting and electronic industries. Availability: At present, we can supply you 99.98%of tungsten bar with a very competitive price. The monthly production ability is 120m/t. I would send you the detail analysis report for this product if you have interest in it. Or you can call me all round the day at0086--797--8293777 Product specification: 12 *12* (330 to 350)mm. Packing specification: 400??6*165??6*130??6mm (inner). Quantity: 35 pieces/case (0.8~1.0 kg/piece). Net weight2931.5kg/case. Packing: wooden case.
Tungsten filaments, made of tungsten wires, have high melting point and good corrosion resistance. They are mainly used for vacuum metallizing, such as heating elements. For chrome scope, mirrors, plastics and decoration articles. Tungsten filaments can be stranded into single or several wires according to the samples or drawings of customers. Pure wire and doped wire are both available.Diameter of tungsten wire: 0.55---2.0mm Tungsten wire is used as vacumme material. Tungsten filament is applied as evaporator(heating element)in the vacuum metalizing We can produce the products according to the customers'drawing or sample. Attached labels indicate detailed production information Reeled on spools, pack in cartons or cases or according to customers' requirements.
tungsten carbide moulds, precision tools and blanks. The main products are tungsten carbide rings and rollers, strips, blades, drawing dies, heading dies, rods, precision tools. tungsten carbide moulds, precision tools and blanks. The main products are tungsten carbide rings and rollers, strips, blades, drawing dies, heading dies, rods, precision tools.
Tungsten bar, w 99.8%min Tungsten rod, sheet, wire: w 99.9%min
Evaporation tungsten wire is used as vacumme material,cathode for emitting tube,high temperature electrodes,many specification are supplied Evaporation Tungsten Filament is mainly used as filament,cathode for emitting tube,high temperature electrodes,Tungsten wire in twisted,folded-heater for electronic tube,grid,gridsiderodelectron tube. These kinds of filaments are applied for vacuum coating and optical coating. tungsten filaments are made of selected high-quality material of tungsten, with the properties of excellent electrical conductivity, excellent thermal conductivity, finely processed. Diameter :0.55--2.0mm Number of strands : 1--10(strands) Shape and dimensin :according to customer`s drawing or sample. Attached labels indicate detailed production information Reeled on spools, Pack in cartons or cases or according to customers' requirements.
Material: W�99.95% Density: 19.3g/cc Package: Export cases (Wooden cases or Iron Drum) Payment: Usually T/T and L/C, D/A can be accepted. Advantage: Excellent service and short delivery ringe of size: Dia Ф3mm~Ф400mm L 20mm~1200mm applications: tungsten rods have special properties, such as small coefficient of expansion and large elastic modulus,high melting point , it is widely used in variety fileds,such as aerospace and high temperatures uses, support lines ,lead-in lines,printer needles,electrods, quartz furnaces,high-speed tools,automotive automatic products, heating and welding applications. Our products are widely used in making the heavy metals alloys, medical, heat sinks and high density applications. advantages: more than 15 years in manufacturing tungsten products, mature techonology and experienced short delivery and excellent service competitive price variety sizes If you have any inquiry, please feel free to contact us now.
