1. Tungsten wire tungsten Filament: tungsten wire in spool
Model NO.: KK
Type: Tungsten Wire
Material: W-1
Purity: 99.95%Min.
Melting Point: 3410 Ceiclus
Boiling Point: 5927 Ceiclus
Density: 19.2g/cm3
Diameter: 0.01-2.00mm
Surface: Black and Cleaned
Export Markets: Global
2. Dimensions and Tolerances of tungsten wire:
Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire.
The standard diameter tolerance is: � 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product.
Specification:
Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm
Big heater element Small heater element
0.4-3.0 1 0.3
0.4-1.0 1 0.3
0.4-1.3 1 0.3
0.4-1.0 2 1 0.3
0.4-1.0 1 0.3
0.4-1.0 several stranded coils 0.3
Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire.
3. Straightness of tungsten wire:
Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases.
4. Quality and Finish:
Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching.
5. Products Feature:
1. Excellent Conductivity
2. Resistance of high temperature.
3. Abrasion and Erosion.
4. Suitable for making heating wires.
5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage.
brand:W3101 W3102 W34 W1 W2 Content: W3 W34 W2: W>=99.929% Character and usage W3101:twist wire; it has good character in high temperature and endurance.Second crystal temperature >=1950C,mainly used as filament wire in halogen,high temperature color filament,twist filament,white filament and fluorescence filament. W3102: it has good character in roll and high temperature.Second crystal temperature >=1850C,mainly used in white filament wire,vacuum tube heating wire. W34: used in twist wire W1/W2:used as frame of vacuum tube,heating elements. Super thin white tungsten wire. Specs :3-14 um Usage : electronic watch, electronic computer,mini-bulb and other precision equipment manufacture. We can supply black wire,polish white wire,and rectify white according to customers' requirement . In wooden box.
Tungsten wire is used as vacumme material. Tungsten filament is applied as evaporator(heating element)in the vacuum metalizing Twisted tungsten wires are made of selected high quality material of tungsten,with the properties of excellent thermal conductivity,finely processed,and long duration. Usually twisted tungsten filament are used as evaporator (heating element) in the vacuum metalllizing(evaporation) process to coat thin film on surface of mirrors,kinescope,toys,home appliance,machine and various decoration,etc. Grade:JT88 Diameter:ª¦0.55--2.0mm Number of strands:1--10 (strands). We can produce the products according to the customers'drawing or sample. Attached labels indicate detailed production information Reeled on spools, Pack in cartons or cases or according to customers' requirements
Tungsten wire Carefully packaged
Tungsten wire Our tungsten wire processed from tungsten rod of toshiba is quite suitable to be made into strand tungsten filaments for vacuum metalizing or various lamps filament. Sstandard or up to specific requirement
Product name: black pure tungsten wire Purity: â?¥99.95% Density: 19.2g/cm3 Diameter: 0.03-3mm Surface finish: alkaline/black Quality standard: ISO 9001 Tungsten wire application: Tungsten wire mainly used for making heating wires, twisted wires for coating films under vacuum, also used as electrical lig. The diameter can be customized as requirement,different application,our processing way will be different.
FW & HW two series tungsten wires both are doped with Potassium (K), Silicon (Si), Aluminum (Al), which have a good reputation with customers both domestic and overseas. FW series wire is our standard non-sag, high quality, and characterized by long grain recrystallized, especially good for high speed coiling. As the raw materials, FW wire is often used to be filaments for fluorescent lamp. HW series wire excels in high temperature vibration resistance and anti-blackening property. It varies from a standard non-sagging wire, which is developed especially for halogen lamp filament by our original production control. We produce these wires via a technology well established by some experts' experience and knowledge of customers needs. We also undertake consignment processing on customer's request, such as heavy tungsten wire for redraw.
WAL1 WAL2 Tungsten Products Tungsten Wire Surface Black / Cleaned For Lightening Tungsten with high melting point, high resistance, good intensity and low evaporation pressure, suitable for making heating element. Placing film material (aluminum, chrome, indium etc.) in vacuum metalizing machine, with high vacuum, the heating element (tungsten heater) will evaporate the film turn into shiny and beautiful film. Description of Tungsten Wire: 1. Purity: 99.95%-99.98%; 2. Grade: W1, WAL1,W-4 3. Density:19.2g/cm3 4. Package:wooden case or on request; 5. The tungsten wire features excellent formability, long life and super lighting efficiency. Mainly used for making various electron tube, H series auto lamp,halogen lamp and other special lamp.
99.95% High Purity Tungsten Wires Straightened 0.02mm-2.0mm Tungsten Products Tungsten wires are used in filaments in incandescent light bulbs; it is also used in electric contacts and arc-welding electrodes. Tungsten is used in alloys, such as steel, to which it imparts great strength. Tungsten is a lustrous and silvery white metal. The bulk metal resists attack by oxygen, acids and alkalis. Tungsten has the highest melting point of any metal. Packing of tungsten wires Tungsten wire in spool: plastic case or plastic vacuum packing. Tungsten wire in coil: woven bag or plastic vacuum packing. Note: The length or weight of single tungsten wire can be supplied by your special request.
China Manufacturer with main products:tungsten crucible ,tungsten rod ,tungsten plate/sheet ,tungsten tube ,tungsten heating elements ,tungsten wire ,molybdenum crucible ,molybdenum rod ,molybdenum plate/sheet ,molybdenum tube ,molybdenum electrode ,alloy products
