Helical gear motor feature
Drive motor power(p1) y/y2 induction motor, 0.12kw~180kw
Voltage scope(v) 110v~660v or make specially according to clients’requirement.
Phase single(under 3kw) or three
Pole 2 or 4 or 6 or 8 or 10
Motor speed(n1) relys on motor pole:650r/min~3000r/min
Frequency 50hz or 60hz or 50/60hz
Ip ip54 or ip55 or make specially according to clients’ requirement.
Terminal box 0º or 90º or 180º or 270º, any position is allowed
Connect method direct type, if client’s convenient to replace motor, please consider to add extra motor adapter.
Ratio scope(i) 3.2~264, if client want bigger ratio, please consider combination type.
Rated torque(n.M) 72n.M~14800n.M
Output speed(n2) depends on motor pole: n1/ratio(i), n2=0.06r/min~1090r/min
Service factor(fs) 1.2~5.0
Mount type foot and shaft mount
Different type, different size, once confirm type well, we will provide detailed packing information.
Power Range: 4â??6000 KW
Transmission Ration Range: 1.25â??450
Output Torque: top to 950 Kn.m
Characteristics:
Design
1.) Highly standard modular designed, more sizes with a reduced variety of parts.
2.) Higher operational reliability combined with increased power capacity.
Mounting position
The gear units can be supplied for either horizontal or vertical installation.
Other arrangements are also possible on request.
Long service life
Under the condition of accurately s
electing type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50,000 hours.
Low noise
All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached.
Thermal conduction
1.) The gear units have a high efficiency.
2.) Through enlarged housing surface areas.
3.) Because large fans incorporating a new type of air conduction fan cowl are being used.
300 series planetary gearbox
Model 300 series
Replace for Brevini ed, et, eq, em, ec and el series
Bonfiglioli 300 series
Dinamicoil re, ra series
Reggiane riduttori rr series
Ratio 3.4-5000
Output torque 1000-450000n.M
Overview
The installation and overall dimension of planetary gearboxes are strictly designed in accordance with italy and american manufacturers, so they can be completely interchangeable with brevini ed, et, eq, em, ec and el series, bonfiglioli 300 series and dinamicoil re, ra series on performance and connection dimensions. They are the ideal product to replace those italian products.
Features:
Torque: 1-450kn.M, ratio: 3.4-5000
Gear unit version: in line or right angle (with screw bevel pair gleason)
Output configuration: foot and flange mounted
Output shaft: solid with key, splined, splined hollow, hollow shaft with shrink disc
Gear unit input configurations: iec-normalized motor adaptors or solid input shaft
Main brake motor features: dc and ac brake
Hydraulic brake: fast braking and/or brake releasing through
Mounting dimension is available on request.
Brake, balance valve, shuttle valve and the distributor which can integrate all kinds of function valve are also available on request
Wooden box, poly bag
799 Tr Series Rigid Tooth Flank Helical Gearbox Suppliers
Short on time? Let Tr Series Rigid Tooth Flank Helical Gearbox sellers contact you.
Type : planetary, helical, worm
Orientation : horizontal, vertical
Mounting : foot, flange
Input (rpm or ratio) : 750-1500 rpm
Output torque (nm) : 20-300 rpm
Brand : roadcon
Material : cast iron, steel and bronze
Application : industrial use
Condition : new
Power source : 5 hp to 125 hp
Voltage (v) : 220v
Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the series h helical gear boxes range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.
Specification:
1.Supply voltage: loop power 18~32 vdc
2.Dcv input: 0~500 mv/ 0~1v/ 0~5v/ 0~10v/ 0~20v
3.Dca input: 0~20 ma/ 4~20 ma
4.Thermocouple input: k / j / t / e / r / s / b / n
5.Rtd/ resistance input: pt100/0~400w
6.Analog output: 4~20 ma (loop power)
7.Ambient temperature: -20~60c
8.Communication: hart
9.Galvanic isolation: 1500v
Feature:
1.Isolation voltage: 1500 vac
2.Loop power 12~32vdc
3.Linear current output
4.Lcd display with 3 press buttons
5.Universal type with multi-signal input
6.With communication port for programming
7.Optional: hart
TMI 20.4.200416
Product Description
High speed air jet loom is with the rigidity of machine frame and top beam further strengthened. The whole machine is of a desired stability, beating system & is better optimised. Structure is further improved. Beating may be done with four or six-shedding levers. With the six-shedding lever, the warp yarn has longer opening hours, as a result, this high speed air jet loom will be better for weft yarn insertion. Especially suitable for wider fabric weaving, so it extends the weaving scope on our high speed air jet loom
Technical Specifications
Reed Width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 320 cm, 340 cm, 9000px
Drive: New designed motor; Electromagnetic brake; But on control
Weft selection: 1,2,4 or 6 colors
Weft insertion: The main and auxiliary nozzles are electronically controlled
Beating: Solid beating shaft with multiple foot stand, Four crank shedding beating
Let-off: Electric let off, 800 mm beam pipe
Take-up: Electric take up, Max rolling 600 mm
Heald frame: 6-16 Pcs on low price by Tsudakoma tech weaving air jet loom
Shedding: crank shedding/positive cam shedding/electronic dobby shedding
Air supplying: Centralised air compressor
Speed: 500~1000rpm
Power: 2.8kw,3.0kw,3.8kw,4.5kw
Weft density: 5-60 picks/inch
Yarn account: 10-60S
Cutting: Mechanical
Selvedge: Closed selvedge with tuck-in device
Wires: 10000 pieces
Dropper: 10000 pieces
Reed: 1 piece
Back rest: Double back rest,removable back rest seat on the back of high speed air jet loom
Electric control box: Touchable screen; Controlled by computer; parameter setting and controlling, auto diagnosis
Stopping device: 4 color LED lights, cracked ends: 6 line droppers, broken picks, two weft feeler, Leno edge apparatus, near switch, Capture side of weft yarn, sensor
Gears in main box: T tooth with QT700 material
Belt: Brand: Chinese, excellent quality, longer life
Gear shaft: 45# steel with High frequency quenching process
Oil seal: CTY GERMANY
Oil nipple: Taiwan
Crossbeam: Triangular steel, weaving steadily
Lifting: Solid supporting, Thickened pipe,imported bearings
Painting: Polishing, sandblasting, baking finish
Iron castings: Weight of the high speed air jet loom, iron castings are increased
The production of wood carving in Kenya is associated with the Akamba ethnic community of the arid and semi-arid eastern region of Kenya. The art of woodcarving dates back to 450 years ago. In other words, it is a perfected skill, which has been passed on from one generation to the next. The young apprentice works among the seasoned master carvers; learning all the techniques of the craft form splitting the timber to carving and hand polishing the finished forms. Many of the artisans specialize in sculpting a series of African forms, including the exotic wide range of wild animals found in Kenya and East Africa. All carvings must meet rigid standards of quality for the export market. While production norms are maintained, no two pieces are ever exactly the same. Traditionally, the women role is to sand paper the finished product as part of quality touch in terms of coming up with high quality products.
The art of woodcarving as one would rightly put it is in Akamba people's blood. The carvers age range from 18-65 years. Kenya has over 60,000 highly skilled craftsmen who produce tones of woodcarvings a month. Woodcarving as an income generating activity supports about 350,000 people. The woodcarving production is by nature labor intensive. The craftsmen model each form using simple tools made from animal hide, local wood and spring steel fashioned into adzes and knives. No machinery is used in the process of transferring a tree- truck into hundreds of items both decorative and functional. The woodcarving products are very popular with the tourists visiting Kenya.
Kenya's woodcarving items have over the years been exported to almost all parts of the world. The wood carvings products have not only acted as a source of income for a large number of Akamba community but have also been a commodity that has over the years earned Kenya a substantial amount of foreign exchange. This has been realized through the sale of a wide range of decorative and utility products such as the animal figures, traditional people masks, bookends, salad servers and many other items.
Some of the wood that the carvers use or cut down have now come to be enlisted as endangered species and for that reason, the government has come up with stringent measure that requires planting of at least two trees for each tree fallen or cut. Besides that, the government has also put tough measures, which require issuance of license before any tree is cut or fallen down. These measures are aimed at avoiding further deforestation in Akamba arid and semi-arid areas and the entire country in general. According to the available research/statistics, the carvers need for wood account to 10% of the national consumption of hard wood.
mainly made with Powder metallurgy steel, our products are mainly used for reducer, harmonic reducer, auto gear, wind power gear ring, etc.
All the products are customized according to customers working part drawing, we need know your products drawing first then we make suitable cutters according to the drawing.
The cutters we can make customization for you as below:
gear skiving cutter gear hob cutter
Carbide alloy skiving cutter
Harmonic skiving/turning cutter
Unequal thickness skiving/turning cutter
Small module gear shaper
Harmonic pinion
Rectangular spline gear shaper
Helical gear-shaper cutter
Helical gear-shaper cutter
Sprocket shaper cutter
Removal, combination, unequal thickness gear teeth shaper cutter
Carbide alloy gear cutting hob
High speed dry cutting hob
Powder metallurgy hole type hob
shaving cutter
master cutter
Mainly used in advanced intelligent harmonic reducer, steel wheel, flexible wheel, teeth efficient processing.
Tool type: taper shank.
All the products are customized according to customers working part drawing, we need know your products drawing first then we make suitable cutters according to the drawing.
The cutters we can make customization for you as below:
gear skiving cutter gear hob cutter
Carbide alloy skiving cutter
Harmonic skiving/turning cutter
Unequal thickness skiving/turning cutter
Small module gear shaper
Harmonic pinion
Rectangular spline gear shaper
Helical gear-shaper cutter
Helical gear-shaper cutter
Sprocket shaper cutter
Removal, combination, unequal thickness gear teeth shaper cutter
Carbide alloy gear cutting hob
High speed dry cutting hob
Powder metallurgy hole type hob
shaving cutter
master cutter
ZLYJ Series Gearboxes for Plastic and Rubber Single Screw Rod Extruder is a kind of special reducer researched
and developed by importind the most advanced technology of the hard teeth-surface in the world. For recent ten years, they
are widely used in top and middle grade plastic, rubber and chemical fiber extruders, sell well in the country and are exported
abroad. With a higher reputation in the industry, it has features as follows:
1. The whole machine looks beautiful and liberal, and can be used both vertically and horizontally. It can suit multiple
requirement of assembling.
2. The gear data and box structure are optimally designed by the computer. The gears are made of top grade low carbon
alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the
teeth surface is 54 - 62 HRC. The gear pair has stable running, low noisy and has high driving efficiency.
3. The assembling connector has the precision of radial run-out and end face run-out at international level, and can be
easily connected with screw rod of the machine barrel.
4. The bearing structure of the output shaft has a unique style, which can effectively prolong service life of the bearings.
5. All standard parts such as bearing, oil seal, lubricant oil pump etc. are all top quality products selected from domestic
famous manufacturers. They can be also selected from imported products as per requirement of customer.
1. Moq: 1 set
2. Packing method: polywood
3. Delivery lead time: 20-25 days
4. Payment terms: fob, cif, ddp
5. Payment method: t/t, 30% in advance, 70% before delivery
6. Shipping port: shanghai
Material:
Housing: ht250 cast iron
Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc
Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm
Bearing: 42crmo
Warranty: 18 months
Applications:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions.
1. High modularization design: may equip with various motor or other power input conveniently. 1.Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2. Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3. Form of installation: the position to be installed is not limited.
4. High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
5. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
6. Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low;
7. Parallel axis -bevel wheel speed-down motor.
Promise: One year warranty and Free technical support
Guomao Group have been in conformity with ISO9001:2000 standards, ISO14001:2004 standard, OHSAS18001:1999 standard.
1.Product description
Helical Bevel Gearboxes have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dimensions conform the same kinds of foreign.
Technical parameters:
Power: 0.12-200 kw
Torque: 200-50000 N.m
Transmission rate:5-33000
2. Characteristics
Features
High modular design.
High loading support, stable transmitting and low noise level.
Excellent sealing, wide range of industry application.
High efficiency and save power.
Save cost and low maintenance.
3. Application area
Glasses and Plastic Industries: conveyor, carton sealers, grinders, creeper paper manufacturing machine, lintec backing, etc.
Home Appliances: vacuum cleaner, laundry machine, icecream machine, sewing machine, kitchen equipments, etc.
6. Our service
1)One year warranty from delivery.
2)Free components for replacement within warranty period.
3)Professional solution provider.
4)Free technical support at any time.
5)Customer training is available.
6)On-site installation and commissioning is available.
1. Product description
Parallel shaft helical gearboxes are composed of two-stage or three-stage helical gears, which is related to the deceleration ratio and is installed in the same reduction box. A total of 11 specifications of parallel shaft helical gear reducer, the torque range from 3 to 22500NM. The maximum output power of the motor is 200 KW. The transmission ratio range of parallel shaft helical gearbox ranges from i=3.77 to i=31434.
MOQ:No MOQ
Origin Country:Hangzhou,China
2. Characteristics
Smooth transmission, low noise, large bearing capacity, low temperature rise, long service life.
3. Application area
Parallel shaft helical gear recuders are widely used in light industry, food, beer and beverage, chemical industry, escalator, automatic storage equipment, construction, machinery, iron and steel metallurgy, paper-making, wood-based panel machinery, automobile manufacturing, tobacco machinery, water conservancy, printing and packaging, pharmaceutical, textile, building materials, logistics, feed machinery, environmental protection and other fields.
6.Payment & Packing
-Terms of Payment:Â Irrevocable L/C at sight,30% by T/T in advance.
-Packing: To be packed in wooden cases.
-Loading Port: Shanghai ,China
-Delivery time: Within 30 working days after we have received the full payment.Â
7. Our service
 1).One year warranty from delivery.
 2).Professional solution provider.
 3).More than 10 years reducer and motor sale experience.
 4).Good after-sales service. url:http://www.srgearboxes.com
799 Tr Series Rigid Tooth Flank Helical Gearbox Suppliers
Short on time? Let Tr Series Rigid Tooth Flank Helical Gearbox sellers contact you.
