Helical Bevel Gearbox

Hb series bevel-helical right angle shafts gear box 2. Packing method: polywood 3. Delivery lead time: 20-25 days 4. Payment terms: fob, cif, ddp 5. Payment method: t/t, 30% in advance, 70% before delivery 6. Shipping port: shanghai Material: Housing: ht250 cast iron Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm Bearing: 42crmo Warranty: 18 months Applications: The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions. Fumigation case, weight and dimensions depends on the gearbox size.

Bevel Helical Gearbox Power Rated- 3.7 kW upto 2500 kW Torque Rated- 6500 Nm upto 6000000 Nm

Power Range: 4â??6000 KW Transmission Ration Range: 1.25â??450 Output Torque: top to 950 Kn.m Characteristics: Design 1.) Highly standard modular designed, more sizes with a reduced variety of parts. 2.) Higher operational reliability combined with increased power capacity. Mounting position The gear units can be supplied for either horizontal or vertical installation. Other arrangements are also possible on request. Long service life Under the condition of accurately s electing type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50,000 hours. Low noise All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached. Thermal conduction 1.) The gear units have a high efficiency. 2.) Through enlarged housing surface areas. 3.) Because large fans incorporating a new type of air conduction fan cowl are being used.

TK - Bevel Helical Geared Motor are bevel gearboxes with monoblock housing. They are intended for applications requiring higher efficiency and strength. Their input and output shafts are perpendicular to each otherBevel gearboxes can have a maximum of three stages in a single housing. Larger sizes are available only with three stages in a monoblock housing. A higher number of transmission ratios (up to six) can be implemented through the use of additional housings.

Flange-mounted with hollow shaft, foot-mounted with hollow shaft, and can be added torque arm and other special accessories. Large strength, long-term usage Usage: can be combined with various motors for larger transmission rate Carburized gears are durable and highly accurate High overload capacity and reduced noise Transmission ratios are finely classified with millions of different combinations to meet the different requirements of the customers. Input power 0.12 - 200 kw Ratio 5.36-17550 Output torque up to 50000 n. M. Wood/carton

Supplier: Helical gearbox, bevel gearbox, helical-bevel gearbox, worm gearbox, helical-worm gearbox, screw jacks, industry gearbox, planetary gearbox

Worm Gearbox, Helical Gearbox,Bevel gearbox

Supplier: Spiral bevel gears, spiral bevel gearbox, helical bevel gearbox, sheet casting machine, polishing machine

PHB - Twin Shaft Bevel Helical Geared Motor consists of helical-geared industrial gear units with bevel stage input. Input and output shafts are perpendicular. PHB - Twin Shaft Bevel Helical Geared Motor is optimized for power density to achieve the highest rating at the smallest possible dimensions. But because high power density also means increased thermal load, the new products are provided as standard with various cooling options. Efficiency is further enhanced through the use of high-grade lubricants and sealings. Another advantage is the wide range of mounting possibilities: The units can be mounted on any side, directly to the motor flange or to the output flange, greatly simplifying their installation. Because these gear units can be mounted on any side, additional equipment, such as integrated or external forced lubrication or oil expansion tanks are available as accessories. We also offers tailored solutions for specific applications. Our standard range includes reinforced bearing arrangement or extended bearing distance for high radial load or agitator applications, backstops for single-direction applications such as conveyors or elevators, brakes for hoisting or moving applications, and shrink disks for alternating loads. Special solutions for extruder applications are provided for each size and ratio.