Toilet Repair Kits Flush Valve Suppliers and Manufacturers

all color flush tank and toilet seat cover

we are manufacture off PVC Toilet Seat Cover and Flush Tank For Bathroom Use

Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPMâ??s products. Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end. Specification Size: 1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings

SPM Type Plug Valve Repair Kit Fig 1502 Interchangeability Parts code:4L11769 and 4L11982,etc KUOFU have 1" 2" and 3" size Plug valve repair kits,can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM Valve repair kits, which is including plug, seal segment, side segment, elastomer seals, and grease fittings

Specification Size: 1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings How to contact us?

Product Description: Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPM products. Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end. Specification Size: 1 Plug Valve Low Torque (1 x 1) Male x Female FIG1502 1 Plug Valve Low Torque (1 x 2) Male x Female FIG1502 2 Plug Valve Low Torque (2 x 2) Male x Female FIG1502 3 Plug Valve Low Torque (3 x 3) Male x Female FIG1502 Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi). Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the client's request. Plug Valve Repair Kit Interchangeability Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM, FMC and 3 DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings.

Model: DSE-260 ( flush toilet, seat type, double-ply wall) Specification: L112cm * W112cm* H245cm (tolerance 1%) Water tank: 100 Litres Sewage tank: 260 Litres. standard fitting : toilet seat lid , flush system & pump , tissue holder & Tray. Material:HDPE floor : Anit-slip pedal and well clean. Base (tank) : convex-concave edge for drainage while washing floor.

Toilet dual flushing valves Flush volume is steady. Dual flush valve for two-piece or one-piece toilet, Overflow pipe height can be customized. High quality silicon seal. Half and full flush volume is adjustable Upc, cupc, ce certifications No damage after 100, 000 times testing of full flush and half flush/each The flush valve body is buckled with base by rotating buckle and is easy to install and maintain. Colored box are available Pe bag

Toilet flushing valve

Dimension: 512*80*1020mm Material: HDPE Volume: 3L/6L, Max: 7L Frame understand: 400kgs Brass angle valve Discharge pipe diameter: 90mm or 110mm Suit for: over 125mm dry wall or prewall Push panel size: 250*165mm Push panel color: Chrome/Satin/White

Plug Valves are used to control flow opena and close. valve bodies are die-forged from premium alloy steel and heat treated to ensure the strength. plugs and seal segments are machined from heat treated alloy steel with special surface treatment to ensure reliable sealing capacity. Compact structure, easy operation and maintenance. Union connections on both ends. Available with manual, handwheel and hydraulic actuators with limiter switches. Valves can be serviced without removing from the line. Plug valves for standard service range are available in 1 " to 4 " bore sizes and 6,000psi to 20,000psi rated pressure. We has also developed plug valves for H2S service in accordance with NACE MR0175 criteria with 1 " to 4 " bore sizes and 10,000psi to 15,000psi rated pressure. JASON provides a customized design to meet each customerâ??s unique requirements. Recommended service: Fracturing, cementing,acidizing and testing lines

1.Connector: 59mm(2 ) for 1pc toilet 59mm(2 for 2pcs toilet 2.Fixed and adjustable overflow pipe for option, Fixed overflow pipe height: as request Adjustable overflow pipe height: 220mm-380mm 3.Flush valve height:185mm, 250mm, 290mm.It is suitable for toilet tank height of 220mm-450mm, 285mm-515mm, 325mm-555mm 4. Adjustable partial and full flush can save more water as request 5.Various top push button for selection 6.Metal lock for one piece toilet. 1pc /pe bag.

1.Connector:48.4mm(1.5 ), 59mm(2 ), 65mm for 1pc toilet 48.4mm(1.5 ), 59mm(2 ), 65mm for 2pcs toilet 2.Fixed and adjustable overflow pipe for option, Fixed overflow pipe height: as request Adjustable overflow pipe height: 220mm-380mm 3.Flush valve height:180mm.It is suitable for toilet tank height of 240mm-450mm 4. Adjustable partial and full flush can save more water as request 5.Side push and top push both workable 6.Metal lock for one piece toilet 7. 38 push button option to with16 adaptor. 1pc/pe bag.

The Mud Gate Valve, with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in today's oilfield. The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain. The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todays oilfield. DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A Specification for Wellhead and Christmas Tree Equipment. ANSI B31.3 Chemical Plant and Petroleum Refinery Piping. ASME VIII Boiler and Pressure Vessel Code. MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components. NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment. 1. Designed specifically for Abrasive and Erosive use. 2. All Valves Have Stainless Steel Stems. 3. API 6A PSL 1, 2 and 3 available. 4. Gates can be supplied in Nickel-Plated Carbon Steel, Monel, Aluminum Bronze or Stainless Steel. 5. Stainless or Carbon Steel Inserts with Nitrile or HNBR Elastomer. 6. Factory Pressure Tested in Accordance with API.6A. 7. Can be supplied with Flanged End Connections, Hammer Union Ends, Threaded Connections or Butt Weld Ends. 8. Sour Service Models to NACE MR-01-75. 9. Available with Pressure Ratings: 2000psi, 3000psi, 5000psi, 7500psi, 10000psi. Port Size with: 2", 3", 4", 5" x 4" and 6" x 4", and temperature service up to 400°F. 10. Full Material Traceability Guaranteed. 11. Supplied with Full Certification at no extra charge.

Flush bottom valves are special purpose valves used for draining the unwanted. They are available in various sizes and materials. The material range is given to suit every type of industrial flushing needs. We have an inventory of standard sized flush bottom valves to fulfil instant demands. For special orders we carry out the exporting as per given specifications.

Also suitable for fermantation services

Material: ABS Type: HJ-02 1ú«Available with brass rod or POM rod. 2ú«Adjustable refill rate 0-30% 3ú«Lever theory, Anti-siphon, keep water level steady under different water pressure. 4ú«Fixing height available in 8í¦,10í¦,12í¦ 5ú«Available with 15/16 connector or 1/2 connector