Drill pipe in good condition All size
Our Drill bits are come from CS brand and Kingdream Brand, which are the best famous brand in China and top 5 in the word, our drill bits has solded to more than 30 countries including USA and Russia with superior quality. - Product Specifications 1) Condition: 100% new 2) Manufacturer brand name: CS or Kingdream brand 3) The exact bit size: 8 1/2" = 215.9mm 4) IADC code: 127 Steel tooth Tricone Bit 5) Seal type: Elastomer Sealed Bearing 6) Bearing type: Journal Sealed bearing bit with gauge protection 7) Nozzle quantity and nozzle size:3 pcs 8) Connection joint Pin size: 4 1/2 API Reg pin 3-Available sizes: 60mm,65mm,76mm,93mm,95mm,98mm(3 7/8),101.6mm,114mm,118mm,120mm,127mm(5) 130.1mm(5 1/8),133.3mm(5 1/4),139.7mm(5 1/2),142.8mm(5 5/8),149.2mm(5 7/8) 152.4mm(6),155.5mm(6 1/8),158.7mm(6 1/4),161.9mm(6 3/8),165.1mm(6 1/2) 190.5mm(7 1/2),193.6mm(7 5/8),200.0mm(7 7/8) 212.7mm(8 3/8),215.9mm(8 1/2),222.2mm8 3/4) 241.3(9 1/2),244.4(9 5/8),250.8(9 7/8) 269.8(10 5/8),295.3(11 5/8) 311.1(12 1/4),346.0 (13 5/8),349.2(13 3/4) 374.6(14 3/4) 381(15),393.7(15 1/2),406.4(16) 444.5(17 1/2),508(20),558(22),609.6(24) 660.4(26) 4-Available models: Steel tooth (IADC) : 111, 121,131 117,124,126,127,136,137 211,311 216,217, 227 TCI (IADC): 415,435, 417,437 515,525,535,545, 517,527,537,547 615,625,635,,617,627,637,737 512,522,532,612,622,632,732
Tricone bits, rock bits, steel tooth bits, milled tooth bits, drill pipe, drill collar, TCI rock bits, PDC drill bits.
TCI tricone rock bits: 1)Certified by ISO9001&API 2))Used for water well, oil field 3)IADC:114-117,127,437,517,617,637.
Tricone bit,PDC bit,TCI bit,drill pipe,drill collar(used and new).
Advantage: 1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit 2 Certified by ISO9001&API 3 Wide size code 4 Best price 5 Delivery on time 6 High quality and competitive price 7 rubber seal or metal seal 8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc 9 be used for water well, oil field, underground, construction, geothermal, directional boring 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
Advantage: 1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit 2 Certified by ISO9001&API 3 Wide size code 4 Best price 5 Delivery on time 6 High quality and competitive price 7 rubber seal or metal seal 8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc 9 be used for water well, oil field, underground, construction, geothermal, directional boring 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*40*45 cm 50kg
Bits oil drilling, mini smith bit, pdc bit, rock bit, cone bit, tci bits, drill ng bits, drilling accessories, oil rings ,assembly drill, steel tooth bit, junk pdc, tricone bit, single cone.
Brief introduction Size 12 1/4'' (311.1mm) Iadc 517 Bearing type Sealed bearing Thread connection 6 5/8 reg pin Wob(kn/mm) 0.35~1.05 Rpm(r/min) 120~50 Make up toqure(kn.M) 46.1~54.2 Weight(kgs/pc) 278 Color Customized Packing Plywood box(free-fumigation) Industrial standard Sy/t5164 Moq 1 pc Payment terms T/t, western union, and l/c are acceptable Applications Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc. Note:other size and iadc is avaiable
The steel tricone bit is made of high manganese carbon steel, and our products almost cover all the iadc code, all in good quality and reasonable price. 30*35*40cm 50kg
Hss twist drill bits, sds plus hammer drill bit, hss machine taps, hss step drill bits, hss center drill bits, wood working drill bits, masonry drill bits, end mills, diamond cutting disc, tct saw blade.
Model Number:417,517,617 ,437,537,637,117,217 Type: rock bit cutter Material:Tungsten Carbide Use: Well Drilling Formation:soft to hard formation Usage:Produce /replace hole opener cutters Bearing type: journal bearing Sealed type:metal sealing /Rubber seal Teeth type: insert button or milled tooth,saw tooth Name:Tci rock bit cutter
Drilling and civil engineering bentonite is made by API and OCMA standardIt can be used as low solid phase mud in under ground civil engineering and drilling field  The specifications Item Mud  yieldM3T Filter  loss ML30min Yield  1b100ft2 Moisture  Wet Sieve Analysis0074mm gel strength HH01 18 12 3xPV 12 4 18 25 40 HH02 1218 1218 3xPV 12 4 15 20 30
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
Building & construction materials, minerals and chemicals, fly ash (astm c618 class f / bs en 450 / bs 3892), ggbfs / gbs, aggregates (crushed stones, stone chips), bentonite (drilling, pilling, foundry, construction), kaolin/china clay, salt/sodium chloride (industrial grade, food grade).Exports
Barite, baryte, barium sulphate, mango, mango pulp, banana, papaya, turmeric, red chilli, spices like dry red chilli, turmeric finger, dry red chilli powder, turmeric powder, barite powder (baso4 oil drilling mud) and fresh pomegranate arils.
Product description: 12 1/4" TCI bit Size: 12 1/4" IADC code:517 Sealed Type: Rubber sealed Thread:6 5/8"reg pin WOB(KN/mm):0.7~1.20 RPM(r/min):70~40 Make up toqure(KN.M):16.300~21.700 Weight(kgs/pc):105 Color:Blue, red, green or Customized Packing:Plywood box(free-fumigation) Industrial standard:SY/T5164 MOQ:1 PC Payment terms: T/T,Western Union,and L/C are acceptable Applications:Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc. Note:other size and IADC is available
Tricone bit, PDC bit, PDC core bit, single cone bit, drill pipe, tci tricone bit, drag bit, oil drill bit, drilling equipment.