Sucker rod pump is equipped with a support joint (there are two support joints in API-RHBM-AC), attached to the tubing string, which will down to the bottom of the well with the tubing string. Plunger assembly connected to rod string and together with the pump overall down to joint position, then the pump is fixed inside the joint. Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work.When it breaks down, no need to lift the tubing string out, just put the whole pump out of the well through the rod string.
Sucker rods are manufactured according to API 11B Specifications. Currently, we market 3 types of API sucker rods Grade D Alloy and Grade D Special which are formulated from different alloysï¼?AISI 4130 (Grade D), AISI 4142 (Grade D) and AISI 4720 (Grade KD). Manufacturing Process: 1. Rod Bar The incoming rod bars are inspected for any damage, fault and discontinuities.Before arranging the rod bars for production process, carry out chemical composition testing, dimensional inspection & surface quality inspection. High quality standard is maintained at various stage inspections. 2.Manufacturing Rod bars are manufactured from hot rolled alloy steel. Rod bars are machine straightened and cold drawn to the required size. The rod bar ends are hot forged according to API designed sizes. The rods are then heat treated over the full length.As per requirement of mechanical properties, the rods are normalized and tempered to the specified level or quenched and tempered to the required hardness and strength. Care is taken to achieve metallographic structure with no residual stresses in the rod.A sample specimen is cut from the heat treated material and is tested for ultimate tensile strength, yield strength and elongation. The rod is then again checked for straightness. The forged ends are properly aligned with its body. Rods are cleaned by shot-blasting to remove any scale and oxidation. The forged ends are machined on C.N.C. Lathe machines as per API dimensions and checked with API approved gauges.
Sucker Rod Elevators are hoisting tools for handling sucker rods.They are designed and manufactured according to API Spec 8C.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod. Feature: (1) . Sucker Rod Wrench available for different size. (2) . National best quality with API standard. (3) . Short on deliver time. (4) . Made from heat-treated alloy steel. (5) . Easy to operation.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod. Feature: (1) . Sucker Rod Wrench available for different size. (2) . National best quality with API standard. (3) . Short on deliver time. (4) . Made from heat-treated alloy steel. (5) . Easy to operation.
Advanced thermal spraying technology is adopted to melt Ni alloy and other high wear-resisting materials on the blank surface of the collar after high temperature flame spraying, so as to reduce the friction coefficient between the anti-wear collar and the oil pipe to 0.01, which is an effective combination of high hardness and low friction, thus improving the service life of the rod and pipe in oil exploitation. Sucker Rod Coupling Designed and manufactured according to API spec 11B. The couplings are manufactured in grades SM and DES. Increased wear and corrosion resistance. Surface treatment includes black coating, phosphating or as per the customers requirement.
Features (1). Sucker Rod Wrench available for different size. (2). National best quality with API standard. (3). Short on deliver time. (4). Made from heat-treated alloy steel. (5). Easy to operation. Caution (1). Before use, you should choose wrench in line with the Specification of the rod. (2). After use, it should be cleaned, and pressrved in a cool dry place. (3). After a period of time of use, it should be checked of wear and tear to ensure that the wrench is in the best working condition.
API 16A Standard 2 7/8" sucker rod BOP 1. size: 2 7/8" 2.Pressure: 3000 PSi 3. Use for 1 1/4' rod 2 7/8" sucker rod BOP API standard 2 7/8" sucker rod BOP
So far forever has already had many sucessful cases for sucker rod quenching furnace, such as , ¸20-25 sucker rod quenching furnace, , ¸20-38 sucker rod quenching furnace, , ¸38-45 sucker rod quenching furnace. Sucker rod quenching furnace features 1.Heating way: magnetic induction heating 2.Water cooling system:closed cooling tower 3.Control system:plc siemens control device 4.Temperature adjustment: automatic Sucker rod quenching furnace advantages 1.High reliability:adopt famous brand components of igbt power supply which reduce fault rate and make sure the equipment can run reliably. 2.Safe and reliable.There are reliable protection covers for the mechanical rotating parts, which is durable and very safe for operators. Automatic protections for water temperature, water pressure, phase shortage, overcurrent and undervoltage. 3.Easy installation & commission and simple operation. 4.Transmission mechanism frame has sufficient strength and rigidity for ease of installation of equipment 5.Feeding and discharging table is using high quality steel welded firmly, which can withstand a certain impact load.
Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting sucker rod.
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
Sucker Rod Coupling is a joint for Sucker rod, used in oil well downhole for oil pumping and Production. Yunsheng sucker rod couplings are manufactured from high quality Alloy Steel AISI 5140, fully in accordance with API Spec 11B standard, including class SM coupling, class T coupling, Sub coupling, Full Size, Slim Hole and Over Size, and the thread size are available at 5/8â??, 3/4â??, 7/8â??, 1â?? and 1 1/8â??. SUCKER ROD COUPLING T, SM Nominal Size (in) Outer Diameter +0.13(+0.005)- 0.25(-0.010)(in/mm) Inner Diameter +0.13(+0.005)- 0.25(-0.010)(in/mm) Outer Size(in) O.D.*Length Weight (kg) Full Size 5/8" 1 1/2(38.10) 15/16(23.81) 1.500�?4.000 0.56 3/4" 1 5/8(41.28) 1 1/16(26.99) 1.625 4.000 0.62 7/8" 1 13/16(46.04) 1 3/16(30.16) 1.812�?4.000 0.75 1" 2 3/16(55.56) 1 3/8(34.93) 2.187�?4.000 1.15 1-1/8" 2 3/8(60.33) 1 9/16(39.69) 2.375�?4.500 1.45 Slim Hole 5/8" 1-1/4(31.8) 15/16(23.81) 1.250�?4.000 0.41 3/4" 1-1/2(38.1) 1 1/16(26.99) 1.500�?4.000 0.47 7/8" 1-5/8(41.3) 1 3/16(30.16) 1.625�?4.000 0.52 1" 2(50.8) 1 3/8(34.93) 2.000�?4.000 0.58
Product Description It is recommended that centralizers be used on the rods for reduction of rod string and oil well tubing wear. The centralizers can be fixed; they can be installed directly on the rod body by pressure die casting method. The rotating centralizers are located between the locks on the rod body and can rotate on the same. Apart from ensuring wear protection, centralizers prevent deposits formation inside oil well tubing and increase the time between well overhauls. 2019 oil well down hole centralizers sucker rod centralizer product show : 2019 oil well down hole centralizers sucker rod centralizer 2019 oil well down hole centralizers sucker rod centralizer Company Information Our Services 1. Are you manufacturer or trader company? We are manufacturer and we could supply more professional technical services and goods. The goods are new or used, if you will make technical drawing and production plans for us? All our goods are new ones, the production schedule will offer to you once getting your purchase order. 2. Do you have related inspection equipments? Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you. 3. Could you tell me if your price includs the third party inspection charges? No, our price do not include the third party inspection charge, and we will notice on our Quotation. 4. Where did your products sell out? United States, Canada, Mexico, Venezuela, Colubia, and other South American Region Russica, Azerbaijan and Central Asia Countires, UAE, Saudi Arabia and Mddle East Counties. For more information, you can contact me : Looking forward to cooperating with you!
Pump Unit A beam and crank assembly creates reciprocating motion in a sucker-rod string that connects to the downhole pump assembly. The pump contains a plunger and valve assembly to convert the reciprocating motion to vertical fluid movement. As the beam pumping system rocks back and forth, this operates the rod string, sucker rod and sucker rod pump, which works similarly to pistons inside a cylinder. The sucker rod pump lifts the oil from the reservoir through the well to the surface. A beam pump is an artificial-lift pumping system which uses a type of reciprocating pump to extract oil from an inland well. Nodding donkeys or beam pumps are a common artificial lift system used in land-based operations. A pumpjack is the overground drive for a reciprocating piston pump in an oil well. It is used to mechanically lift liquid out of the well if not enough bottom hole pressure exists for the liquid to flow all the way to the surface. The arrangement is commonly used for onshore wells producing little oil. Because of their characteristic shape and motion, pumpjacks, also called beam pumps, are often given fanciful names such as "lonely birds" and "nodding donkeys." Whatever name you call them, such pumps are critical to crude oil production.
1. Product performance standards: API 8A and SY / T5235. 2. Environmental conditions used Sucker Rod Elevator a) Allows the use at a temperature of -18 â?? ~ 70 â??. b) Meet the harsh conditions of oil field operations. 3. Sucker Rod Elevator's types: reed. 4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel. 5. Sucker Rod Elevator main technical parameters: a) Applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in. b) Maximum load: 15t (135kN), 25t (225kN). 6. Sucker Rod Elevator major quality control requirements: 1) the chemical composition of each batch of material compliance with the relevant standards. 2) Body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ GB / T5677, the remaining parts of the meet GB â?¢ level requirements / T5677's. 3) Mechanical Properties Body of not less than: Rmâ?¥640 PMa, RP0.2â?¥540 PMa, Zâ?¥15%, Aâ?¥25%,AKVâ?¥42J (-20 â??). 4) product 10% for 1.5 times the testimony load test. 5) All parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ GB / T9444, the remaining parts of the meet GB â?¢ level requirements / T9444's. 6) The main products from raw materials to the carrier using the site dating back the whole process. 7. Sucker Rod Elevator structure diagram and parts list below: CDQ (S) Sucker Rod Elevator structure diagram.
Steel sucker rod 1.The series of products in germany advanced production technology, on the basis of the integration Of our company and the newest research achievements. 2.Drill rod body with high pressure seamless alloy steel pipe, spiral blade choose t steel with high Abrasion resistance, the prestressed winding welding and into. 3.High quality carbon in the alloy steel are used for tool joint is air conditioning quality processing, High pressure molding. 4.This series product the square or hexagonal fast connection, when used by the spring pin Automatic lock, with u or half ring out of stock, the optimal torque of drill pipe. Featurs: 1, ligh.T weight (lighter than the old-fashioned drill pipe 45%) 2, footage soon, dust small vertical holes left after drilling cuttings, into a hole clear. 3, card beans quickly and easily connect and save banding material. 4, under separation of body and drilling may be the end, the use of life extended. 5, water-based wet good pass operation
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
The Quick Details of Sucker Rod Centralizer : Place of Origin: Luoyang ,China Material: Nylon with 30--35%of fiberglas intensifier and wear - resistant additive Brand name: GUORUNXINCAI Colour: Natural colours,Black,grey Model: 19mm 22mm 25mm 29mm The Attributesof Sucker Rod Centralizer for Oil Extraction : 1 The Sucker Rod Centralizer that can reduce torque and friction to the utmost are coordinators of drivepipes , tail pipes and sieve pipes . 2 With the help of Sucker Rod Centralizer , life span of Pumping unit can be increased . 3 The Sucker Rod Centralizers are with wear resistant,self-lubricating and good chemical stability. 4 The installations of Sucker Rod Centralizers are convenient and efficient .
The sucker rod, an essential part in the rod production system, is used to connect the pumping unit on the ground and the oil well pump down in the well.Products comply with Specifications of Sucker Rods (API Spec 11B) and other related standards, and have acquired the authorization to use Official API Monogram.The company produces K, C, D or HL sucker rods with various specifications complying APIâ??s requirements. Technical Performance & Characteristics 1,Advanced online fault detection, hardening, continuous overall tempering and ball blast techniques are incorporated so that mechanical strength and overall performance are enhanced. 2,Threads are processed on special numeral control lathes avoiding any rotation of the rod and then subject to roll forming so as to ensure high precision, reliable performance and extended service life.
Sucker rod is the common equipment in the oil extraction. It is manufactured through many process including the testing, straightening and forging. The sucker rod is placed between the polished rod and oil well pump. To deliver power. Sucker rod is manufactured from high quality carbon steel and alloy steel, which is conform to the API Spec 11B standard. Sucker rod has various types including the common sucker rod, hollow sucker rod and FRP sucker rod. Commonly we use the sucker rod coupling to connect the sucker rod. The sucker rod also has various specs to fit different environments and applications
