Strontium Fluoride Suppliers and Manufacturers

Product Name: Perfluorobutanesulfonyl Fluoride CAS No: 375-72-4 Molecular Formula: C4F10O2S Molecular Weight: 302.09 Molecular Structure: Appearance: Colorless transparent liquid purity: 99%min Application 1.For the synthesis of fluorocarbon surfactants, fluor pesticides, dyes, polycarbonate processing dispersants, etc. 2.Antibacterial synergist.

The aqueous solution of hydrogen fluoride gas is a clear, colorless, fuming corrosive liquid with a strong pungent odor, easily soluble in water and ethanol, and slightly soluble in ether. Hydrofluoric acid is a weak acid with strong corrosiveness, which can strongly corrode metal, glass and silicon-containing objects. It is generally produced in laboratories with fluorite (mainly composed of calcium fluoride) and concentrated sulfuric acid. It needs sealed in a plastic bottle. The chemical industry is used to produce organic and inorganic fluorides (such as potassium fluoride, magnesium fluoride, uranium hexafluoride, calcium fluoride helium, fluororesin, fluoroplastic, fluororubber), dye synthesis, organic synthesis catalyst, and flame-retardant agent etc. In glass processing and production, it is used for frosted bulbs and general bulb treatment, glassware polishing, glass instrument scales, glassware and mirror engraving and lettering. As a cleaning agent for pickling of metal surfaces such as stainless steel. Used in the atomic energy industry, for the production of elemental fluorine and fluorides, and also as catalysts and fluorinating agents.

At the moment we have following grades material available to offer: 40-50% 50-60% 60-65% 65-70% 70-75% 75-80% 80-85% 90% + (Greater than 90%) For any further information please feel free to contact.

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.

Cassava is one of Nigerias most common and essential staple crops recognised as a 21stcentury crop primarily for smallholder farmers Accounting for about 26 of global production Nigeria is one of the largest producers of Cassava in the world producing over 63 million tons of Cassava in 2021 The cassava stem contains about 1162 hemicellulose and 2143 cellulose as fermentable sugars in the form of lignocellulose This means cassava can serve as feedstock to produce both first and secondgeneration biofuels With our robust storage facility which include our two warehouses in eastern Nigeria we can supply 5002000 metric ton of this product per month to any destination

Charcoal is basically a black substance which is derived from burning wood. It is the impure carbon residue which remains after burning wood. It has an unpleasant smell and floats on water as it is porous and brittle. It is also a bad conductor of electricity and heat. With our various warehouses in the southern part of Nigeria we are positioned to supply 1000-3000MT of this product monthly either Hardwood, BBQ or Shisha type of charcoal.

Fresh/Dry Ginger is one of the products we trade majorly on our export channel. We maintain a separate warehouse for it in the Northern Nigeria and Apapa, Lagos to ease the export processes. We always ensure that process gets to the best grade level before executing supply contract locally and internationally. Within the six months of season, November to April, we have the capacity to supply more than 1000 tons monthly. In addition, we supply fresh (raw) Ginger locally for domestic consumption.

Our Non Gmo Soybeans are high in protein and a decent source of both carbs and fat. They are a rich source of various vitamins, minerals, and beneficial plant compounds, such as isoflavones. Soybeans and soy foods may reduce the risk of a range of health problems, including cardiovascular disease, stroke, coronary heart disease (CHD) and some cancers, as well as improving bone health. With our more storage options we can offer the right amount of quantity any buyer wants.

Mica is a hydrated phyllosilicate mineral of aluminium and potassium with formula KAl(F, OH), or (KF) (AlO) (SiO). Muscovite can be cleaved into very thin transparent sheets that can substitute for glass, particularly for high-temperature applications such as industrial furnace or oven windows. It is also used in the manufacture of a wide variety of electronics and as a filler in paints, plastic, and wallboard. Our monthly supply of these mineral ranges from 1000-2000MT.

Fluorspar (CaF2) is widely used in industry and beyond. This chemical compound is mostly fit for the production of hydrogen fluoride, which is used for example in glass etching and yeast production. It is also a valuable raw material used in the production filters and optical glasses, anti-reflection coatings, cosmetics, (calcium) nitrogenous fertilisers used in agriculture, dental preparations and varnishes. With our double storage warehouses in Port Harcourt and Lagos we are positioned to supply 1000-3000MT of this product monthly. Specifications: 1: Grade: CaF2 80+%. 2: Size: According to buyer requirement.

Fluorite ore (CaF2) is widely used in industry and beyond. This chemical compound is mostly fit for the production of hydrogen fluoride, which is used for example in glass etching and yeast production. It is also a valuable raw material used in the production filters and optical glasses, anti-reflection coatings, cosmetics, (calcium) nitrogenous fertilisers used in agriculture, dental preparations and varnishes. Fluorite is also a valuable material for the steel manufacturing industries. With our double storage warehouses in Port Harcourt and Lagos we are positioned to supply 1000-3000MT of this product monthly.

Ilmenite is the primary ore of titanium, a metal needed to make a variety of high-performance alloys. Most of the ilmenite mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Ilmenite Sand. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Ilmenite sand per month to any destination.