Lucky clover We make tlucky cloverhese magic products with many kinds of insects, or flowers, or lucky clover embedded inside. These products are warmly welcomed by worldwide clients because of their good quality and competitive price.We have some man-made amber crafts, such as keychain, bracelet, necklace, Paperweight, desk decoration etc. In box
Fashion jewelry, insect amber decoration, insect keychain, necklace pendant, bracelet, cell phone accessory, paperweight, desktop decoration, crafts, gifts, educational resources, educational specimen, insect education, insect specimen, teacher's tools, teaching aids, kids study toys.
Scorpion bracelet--insect amber jewelry Scorpion bracelet can be a very special gift for yourself and your friend; it is a good luck charm for all people. In chinese cultures, people believe scorpion can protect them from evil. Scorpion bracelet is a symbol of safe keeping. Figuring out which bug you'll receive in your bracelet is exciting! youf+ll never know what you goanna get. Add a bit of color and fun to your life style with real bug jewelry. We still have jewelries(pendant, bracelet, earings) with beautiful insects inside. Measure: 2.8x1.9x1.1cm, color: transparent or glow-in-the-dark. Weight:20 g.
Cable protection hose, oil suction & discharge hose, dredging hose, chemical hose, other hose, rubber sheet, rubber hose, air cell flexible seperator, moulded items, extruded items, inflatable items, coated fabrics.
GBR type hot tack tester is applicable in hot tack property test for flexible and semi-rigid packaging materials or pipe materials. The hot seal temperature, pressure and time can be set by users easily. Temperature control system of digital P.I.D., with high accuracy. Parallel heating surface, even temperature, good sealing efficiency. International quality pressure control devices of higher accuracy. Optional load cell range, easy to change and easy to broaden the test scope. Perform many tests in different width by changing the specimen fixture quickly. Test controlled by micro-computer, led displays, with professional software. Test principle Clamp the two ends of the specimen by the static jaw and dynamic jaw, the driver moves the dynamic jaw, which produces relative movement. Tester gets electronic signal from the load cell after the specimen suffers the force. After analysis, get the data of hot tack, peel, and tension. It can print out the report if needed. Note: hot tack tester tests the strength of a specimen at a specified time interval (tack time) after completion of heat-sealing in melting state but prior to the temperature cooling down to room temperature. Specifications Temperature range: room temperature~250ºc Temp. Control accuracy: ±0.2ºc Dwell pressure: 0.04mpa~0.8mpa Hot sticking time: 0~99s Accuracy : ±1% of reading force Measuring range : 0-300 n Width of specimen : 15mm or 25 mm or 25.4 mm (optional) Length of specimen : 200 mm Dimension : 600mm (l) ×300mm (b) ×220mm (h) Power : AC 220v 50hz/60hz Net weight: 62kg Configuration Standard: mainframe, footswitch, hot tack clamp, calibration frame Optional: software, communication cable, non-standard seal jaws, test board, welding cloak, non-standard jaws, sample cutter, non-standard specimen Standards ASTM f1921, astm f2029, qb/t 2358(zby 28004), ybb 00122003.
Product name Inflatable packaging bag for cell phone Bag type L type Brand Intpkg174; Place of originjiangyin, jiangsu, p.R.China Material Pa/pe 7layers co-extruded film Color clear Column 248; 20mm Thickness 0.075-0.1mm Bag dimension 120mm*155mm 140mm*180mm Column number 5 \ 6
Consolidation apparatus (single gang model) Consolidation test is unidimentional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied. Specifications: The standard outfit comprises of the following items. Loading unit, maximum capacity 20kg/cm sq. Having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different diameter floating ring type consolidation cells. Fixed ring type consolidometer (odometer) cell assembly for testing 60 mm dia x 20 mm thick specimen Consolidation apparatus (three gang model) Consists of 3 consolidation test assemblies mounted on a single frame. Complete with 3 sets of consolidometer cell assembly for 60mm dia samples and three sets of weights each giving 10kg/sq.Cm. On each sample. Consolidation apparatus (six gang model) Same as above but six units mounted on a single frame.
EPGT tube stands on EDTAK2 with Gel Tube. It is coated with lithium heparin and inside the tube a barrier Gel presented at the bottom. Product Feature they are normally made of glass and plastic. In addition, the plastic tube includes PET, PP and PS. Product Specification/Models 1ml 13í-75mm VP10041S 2ml VP20031S 3ml VP30031S 4ml 13í-100mm VP40042S 5ml VP50032S 6ml VP60032S 8ml 16í-100mm VP80043S 9ml VP90043S Application. Through centrifugation, the separation gel can form a barrier between plasma and blood cell and totally separate them. Clinical specimen obtained is suitable for analysis of virus capacity and molecular diagnostics of undiluted plasms. Other Information We are professional manufactory dealing especially with the export of blood collection kits. We are in a position to accept orders according to the customer's samples. 100pcs/tray 1200pcs/carton
As a veteran manufacturer of blood collection tube additives, Desheng has a small workshop to today's large factory. In the ups and downs of the world, it can always maintain its progress, which can only mean that it has been keeping up with the pace of this era, working hard to make every product of it, so that all those who have been exposed to their products Both individuals and companies applauded. I think the success of an enterprise is ultimately inseparable from product quality and service. Since it is an old blood collection tube additive manufacturer, what are their blood collection tube additive products? Serum separation gel, heparin sodium, lithium heparin, dipotassium EDTA, tripotassium EDTA, coagulant, siliconizer, sodium citrate, potassium oxalate, etc. Each product has its characteristics and uses, but who is the one among these products? From the point of view of use, sales and production, the serum separation gel deserves to sit on the throne. Serum separation gel is a substance that separates serum (plasma) and blood cells (blood cells). Separating gel can not only be used with coagulant but also with anticoagulant such as heparin salt, EDTA salt and sodium citrate. The separation glue is used for the preparation of high-quality specimens and for specimen storage and transportation. If separation gel is not used in the blood collection tube of the coagulant, although it can also accelerate blood coagulation and form a blood clot and separate the serum, but the blood clot is in contact with the serum for a long time, there will be material exchange, and the blood cells are very fragile and hemolysis is easy to interfere with the serum sample , The use of separating glue to separate the barrier can solve the problem. Generally, 0.8-1.2g of separating glue is added to each blood collection tube to form an isolation layer of at least 5mm between different components of the blood to ensure the high quality of blood samples. The pure EDTA additive is a routine blood tube, while the use of EDTA dipotassium and serum separation gel together is suitable for the collection, transportation and storage of venous blood samples for nucleic acid testing. It is for DNA amplification testing of HBV DNA, HCV, and HIV. Serum separation gel can effectively block the interference of hemoglobin in red blood cells on nucleic acid detection experiments. We invest a lot of manpower and material resources in serum separation gel every year. Last year we also obtained a patent due to the technical improvement of separation gel, which increased our output from 500 tons per year in the previous period to 800 tons. Sales are also large. The rate of increase is even more exported to home and abroad. No matter from which aspect, the serum separation gel is one of the blood collection tube additives. And our other products are only relative to the separation glue, which may not be so brilliant, but the market share is also commendable.
Blood analysis is a very important and powerful diagnostic tool in animal health and welfare control. It is usually performed in higher vertebrates, and its reference value has been established, but fish hematology still needs further research. Many internal and environmental factors have a profound impact on the hematology value of fish, making it difficult to determine the reference value. In addition, due to the short clotting time, fish blood usually requires the addition of anticoagulants. The choice of anticoagulant is essential to obtain reliable blood test values. In this study, the effects of two common anticoagulants, K 2 EDTA (1.8 mg/ml) and lithium heparin (18 IU/ml), the hematological value of brown trout in the breeding season on the spawning season The spawner conducted an investigation. The results of basic hematology analysis, such as compacted cell volume (PCV), hemoglobin concentration (HGB), red blood cell count (RBC), mean corpuscular hemoglobin (MCH), mean corpuscular volume (MCV), mean corpuscular hemoglobin concentration (MCHC), and White blood cell count (WBC) was compared between K 2 EDTA and lithium heparin. Statistically significant differences were observed in PCV, MCV, and MCHC, while HGB, RBC, MCH, and WBC did not show such differences. These results indicate that lithium heparin provides more reliable results because the red blood cells in the K 2 EDTA-treated samples have a tendency to swell. The salt of ethylenediaminetetraacetic acid (EDTA) is recommended by the International Committee for Standardization in Hematology (ICSH) and the Clinical and Laboratory Standards Institute (CLSI) as the anticoagulant of choice for blood counts. EDTA acts as a chelating agent for Ca 2+ and Mg 2+ ions. It binds to calcium and is essential for the enzymatic reaction in the coagulation cascade, resulting in anticoagulation with minimal impact on cell morphology. EDTA can most reliably preserve the cells on the stained blood membrane. It is commonly used for routine hematology tests in humans, mammals and other vertebrates. It has also achieved some success in fish. However, EDTA salt has some disadvantages. In some cases, they can cause blood hemolysis, especially in specimens anesthetized with unbuffered tricaine mesylate (MS 222). Lithium heparin is more suitable for hematological evaluation of spawning in trout than dipotassium ethylenediaminetetraacetate. Heparin does not affect the size of red blood cells, thereby minimizing the possibility of hemolysis. Compared with heparin, blood smears made from blood treated with EDTA are of higher quality. Based on current research, we suggest that K2EDTA can be used cautiously for blood count and HGB determination. In order to better understand the effects of anticoagulants on hematological parameters, further research is needed.
Our range of extruded PVC sheets are light in weight with homogeneous close cell structure that makes them highly durable. Highly resistant to chemical, these products are extensively used in process industries and laboratories. We also offer our customer cost effective customization of PVC sheets exactly as per their requirement. Ideal for chemical process industries and laboratories and are used for fabrication and lining of: Chemical tanks and vessels Ducts and gutter to carry chemicals Control cabinets and panels Equipment and structures for corrosive environments They can be fabricated and installed in an easy way with conventional tools and simple handling methods. They can be easily worked upon and following operations can be carried out: Thermoforming Machining Bonding Drilling Welding Sawing
Quick details Place of origin: china (mainland) Shape: carbon plate Dimensions: 600x180x50 mm, 600x180x40 mm, 600x300... Ash content (%): ¡¡§10.5% Specifications Carbon plates work as the exclusive anode material in electrolytic cells for generating fluorine gas or sulfur hexafluoride gas Production Raw material: high quality petroleum coke & coal tar pitch. Extruded, carbonized and impregnated under precise technical control. Applications These carbon plates work as the exclusive anode material in the electrolytic cells for generating fluorine gas or sulfur hexafluoride gas. Programmable properties 1.High density and high mechanical strength 2.Good electrical conductivity 3.Corrosion resistance to fluorine and hydrogen fluoride 4.Good wettability to the electrolytes Typical sizes 600x180x50 mm, 600x180x40 mm, 600x300x70 mm Other sizes are available on request. Specifications SpecificationsUnit Bulk density (min.)G/cc1.65 Specific resistance (max.)|¡§¬ |¸•m 40 Compressive strength (min.)Mpa70 Bending strength (min.)Mpa20 Ash (max.)%0.5 * other specifications are available on request. ** the values mentioned in this table are only for reference and not committed to any contract.
Place of origin: china (mainland) Shape: carbon plate Dimensions: 600x180x50 mm, 600x180x40 mm, 600x300... Ash content (%):0.5% Specifications Carbon plates work as the exclusive anode material in electrolytic cells for generating fluorine gas or sulfur hexafluoride gas Production Raw material: high quality petroleum coke & coal tar pitch. Extruded, carbonized and impregnated under precise technical control. Applications These carbon plates work as the exclusive anode material in the electrolytic cells for generating fluorine gas or sulfur hexafluoride gas. Programmable properties 1.High density and high mechanical strength 2.Good electrical conductivity 3.Corrosion resistance to fluorine and hydrogen fluoride 4.Good wettability to the electrolytes Typical sizes 600x180x50 mm, 600x180x40 mm, 600x300x70 mm Other sizes are available on request. Specifications SpecificationsUnit Bulk density (min.)G/cc1.65 Specific resistance (max.)¦ì ¦¸•m 40 Compressive strength (min.)Mpa70 Bending strength (min.)Mpa20 Ash (max.)%0.5 * other specifications are available on request. ** the values mentioned in this table are only for reference and not committed to any contract.
The disposable virus sampling tube/Virus Transport Medium(VTM) is suitable for nucleic acid extraction of SARS-CoV-2 virus, various influenza viruses, avian influenza viruses, rubella, swine fever and other virus samples. The disposable virus sampling tube/Virus Transport Medium(VTM) is suitable for nucleic acid extraction of SARS-CoV-2 virus, various influenza viruses, avian influenza viruses, rubella, swine fever and other virus samples. It is also suitable for the collection and transportation of specimens of Chlamydia, Mycoplasma, and Mycoplasma Arthroplasma. Samples are usually collected from the mouth, throat, nasal cavity, and anus. Sampling tube: The tube body and tube cover are made of polypropylene, which will not deform at high temperature and high pressure (121C, 15min), and will not become brittle at low temperature (196C). Resistant to static extrusion and dynamic impact. The bottom tapered design is resistant to centrifugation and vibration. Built-in sample preservation solution is used for sample preservation to prevent leakage. Sample preservation solution: Functioned with virus lysis solution and virus nucleic acid preservation solution. The virus lysate realizes the inactivation of the virus in the sample and reduces the risk of secondary infection. The unique protection system can prevent nucleic acid from being degraded and improve the accuracy of downstream detection. The sample has a wide adaptability and can be used for the collection, preservation and transportation of various swabs. Sampling swabs: sampling swabs are flocking sampling heads, which are non-toxic to cells and viruses, and do not contain RNase, which can greatly increase the collection and release of virus samples , ensure the accuracy of PCR detection results. The plastic rod is made of ABS, with a unique molded breaking point design, and there is no tiny debris during the breaking process. Features: 1.More collection and release:nylon flocked swabs provide optimum specimen collection because of their ability to collect more specimen at the collection site and to more rapidly release the entire samples specime 2. High safety factor: it can lyse pathogens, inactivate viruses, and reduce the risk of secondary infection. 3. Stable nucleic acid: a unique protection system that can prevent nucleic acid from being degraded and improve the accuracy of downstream detection. 4. Wide sample adaptability: it can be used for the collection, preservation and transportation of various swabs,Including oral swabs, throat swabs, nasal swabs, vaginal swabs and so on.
St-8612pc materials tensile test machine Standard: in accordance with GB 16491, GB/T 2951.1, UL1581, IEC 60811-1-1 standards Technical parameters: 1. Induction method: high precision load cell (sensor) 2. Capacity (optional): 100 / 200 / 500 / 1000 / 2000 / 5000 kgf 3. Unit (switchable): KGF, N, LBF 4. Can meet or surpass of reading: 0.4~100% 5. Load resolution: 1/200000 the same stage and the some resolution during the whole test 6. Class: 1 level 7. Load accuracy: 1% 8. Testing range: 800mm (exclude the grips) 9. Availability width: 340mm 10. Displacement resolution: 0.01/0.001mm 11. Normal non-metal large deformation test instrument: 1 set Metal deformation test instrument (elongation meter): normal distance 10/25/50/100mm optional 12. System constitution: above windows xp operating system, t2006 specific control software and a4 color print function for tester, indicator: computer system software and print function 13. Test speed: 1) metal specimen 0.01~250mm/min, 2) non-metal specimen: 0.01~500mm/min 14. Method of speed: keyboard input 15. High security: restrict protection 16. Over load: protect automatically when 10% of max exceeds. 17. Motor: ac servo motor 18. Tensile grips: select according to users products requirement 19. Power source: ac 220v10%, 50hz / 5a 20. Weight: approx. 280kg Polywood case
Functions as follow: 1. The testing machine is equipped with 100KN axial actuator, which can complete the uniaxial tensile, compression and fatigue testing of materials. 2. The machine is configurate with high temperature heating box, which can complete the fatigue testing uner 1100 . 3. Adopt of imported load cell, displacement and deform extensometer, which would control the data of testing force, confining pressure, specimens deformation automatically and precisely. Such as: a) constant stress, constant displacement, constant deformation. b) speed of constant stress, constant displacement, constant deformation. c) rate control of stress, displacement, deformation. d) loading and unloading in circulation. 4. The testing machine adopts high performance electro-hydraulic servo proportional valve set with wide speed and digital controlling with full digital closed-loop speed regulation control system, smoothly (no impact) conversion among force (stress), displacement and deformation (strain). 5. Safety protections: a) electric system: over voltage, over current, over heating. b) measuring and c pressure, oil temp, oil-way blocking. d) high temp system: ultralimit of high temp e) deformation and time pre-setting, limit of deform. f) protection of specimens rupture 6.The software of testing is working under windows with strong data processing, automatically save, display and printing. Standards as follow, GB/T2611-2007 General Technical Requirements for Testing Machine JJG 139-1999 Tension,Pressure and Universal Testing Machine GB/T2282010 Metal Tensile Test GB/T3075-82 Standard Test Method for Axial Fatigue of Metals GB/T2039-80 Test Method for Tensile Creep of Metals GB/T16826-2008 Electro-hydraulic Servo Universal Testing Machine JB/T9397-2002 Technical Condition of Tensile and Compression Fatigue Machine GB/T228.1-2010 and GB4338-2006-T Testing Methods of Metals Technical spec: 1.Actuator: imported HANCHEN dynamic servo actuator in Germany. Max static loading forceï¼?100KN Max dynamic loading forceï¼?100KN loading frequencyï¼?0.1Hzï½?100Hz orï¼?0.1-30HZï¼? Speed of flexï¼?0ï½?200mm/s Dynamic performanceï¼?loadï¼?±100kNï¼?Ã?amplitudeï¼?±0.1mmï¼?Ã?frequency(100Hz) Accuracy of loadï¼?±0.1%FS Accuracy of displacementï¼?±0.5%FS 2.TEMP of heating furnaceï¼?1100ï¼?accuracy : ±5 3. Testing specimens Specimens plateï¼?0ï½?10mm Round rod specimensï¼?dia. :0ï½?Ï?30mm High tempï¼?connect to M20 of high temp with threaded 4.Oil source systemï¼? Powerï¼? AC380V 50HZ about 35KW Flowï¼?57L/Min Pressureï¼?rated pressure: 25MPa 5.Sensorï¼? Load cellï¼?INTERFACE1032,range is 125KN,accuracy is ±0.04%FS
Features: Chassis: Nylon composite construction Drive: Four wheel with lightweight extruded aluminum shaft Radio: Traxxas TQ 2.4GHz High Output Traxxas Link with mini receiver Electronic Speed Control: Traxxas Velineon VXL 3S Motor: Traxxas Velineon 3500 with ultra high temperature Neodymium magnets and high speed ball bearings Spur Gear: 54 tooth, 0.8 module 32 pitch Pinion Gear: 13 tooth Battery: Traxxas Power Cell 8.4V 3000mAh 7-cell with high-current connector Battery Charger: Body: Painted and trimmed Bumpers: Front and rear, composite construction Shocks: Traxxas Ultra oil filled with high-volume body, silicone bladders, dual X-ring seals and progrssive springs Suspension: C-hub design Transmission: Ball bearing equipped with adjustable Torque-Control slipper clutch with finned aluminum alloy pressure plates Differentials: Revo-spec sealed silicone filled planetary gear type Ball Bearings: Rubber sealed Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Tires: Mud-Terrain, with foam inserts 1.7" (43mm) wide, 4.3" (109mm) diameter Wheels: Beadlock style split spoke with chrome center and color molded outer rim to simulate beadlock, 12mm hex Steering: Dual bellcrank pivoting on rubber sealed bearings with integrated cam-type servo saver, waterproof digital high- torque (125 oz-in) servo. INCLUDES: Traxxas Slash 4X4 Short Course Race Truck with 2.4GHz radio system, brushless ESC and motor, body, 7-cell 3000mAh NiMH battery, AC powered charger, decals and illustrated instruction manual.
Product Description Insulated Copper Tube is mainly used for Installation of Air Conditioner. The Insulated Copper Tube is usually supplied by roll as per ASTM B280 standard, AS 1571 standard and EN 12735 standard. Our Insulated Copper Tube is R22, R407C, R410A, R404A, and R507C compliant. Product Feature The insulation is a double layered structure made of cross linked foam polyethylene with closed cells. The insulation tube is extruded to ensure close tube contact to enhance dew point proofing properties. The insulation is covered with embossed polyethylene film to prevent the foam creasing. The insulation tube is good for Anti-UV, heat resistance, low water absorption. Product Specification / Models Pair Coil size: 1/4 inch +1/2 inch, 1/4 inch +3/8 inch, 3/8 inch +5/8 inch, 3/8 inch +3/4 inchú¼ 1/2 inch +5/8 inch, 1/2 inch +3/4 inch Single Coil size: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch Length: 3m, 5m, 6m, 7.5m, 15m, 18m, 20m, 25m and 30m Application ISO 9001 Other Information Supply Ability: 200MT/month Carton Box
FOR COLLECTION AND TRANSPORT OF SAMPLESFOR NUCLEIC ACID AMPLIFICATION TESTS Intended use: VIROSWAB/TRANSFER is a transport system used for the collection and transport of cells from clinical samples or from the environment, for isolation of nucleic acids that will be used in nucleic acid amplification tests. Summary and explanation of the test: Amplification of nucleic acids isolated of the cells obtained from clinical samples or from the environment by methods like polymerase chain reaction (PCR) is widely used for various purposes like detection of infectious agents, identification of their genotypes, identification of DNA sequences that lead to genetic diseases, drug resistance, etc. The sensitivity of these methods is very much dependant on the appropriate collection and transport of the samples. VIROSWAP/TRANSFER is a kit prepared to enable this. VIROSWAP/TRANSFER is made up of two parts: Sterile dacron swab in a plastic package for collecting the sample and sterile transport medium in a crack-proof plastic tube. Samples obtained by the dacron swab is put in the transport medium. Specimens like a biopsy, scrapings, discharge can directly be put into the medium. Limitations: RNA molecules are very susceptible to nuclease digestion that may be coming from degrading cells. If amplification is intended to be done using RNA molecules as a template, it is recommended to transport the samples in an icebox and isolate nucleic acids within 4 hours. Principles of the procedure: VIROSWAB/TRANSFER is designed in a way to enable easy collection and appropriate transport of the samples. Polycarbonate tubes will not crack as glass tubes when the samples are frozen to preserve for an extended period of time. On the other hand the glass like transparent structure makes it easy to visualize and manipulate the samples. Dacron swab is kept dry; after collecting the sample the shaft of the swab is broken and the swab is placed into the tube containing the transport medium. The shaft of the swab is made from special plastic to enable easy breaking. The transport medium contains tris which keeps the pH around 8.0, which is suitable for nucleic acid preservation. Samples may contain nucleases (DNAse and RNAse) which will digest free nucleic acids and prevent their amplification. These enzymes require Mg++ as their co-factor to be functional. EDTA that is included in the transport medium strongly binds Mg++ and thus inhibits nucleases and preserve nucleic acids. Ingredients: Sterile dacron swab in a plastic package. Nucleic acid transport medium (20mM Tris (pH 8.0), 2mM EDTA) 3ml in plastic tube.
Types: PMMA Sheet, PMMA Plate, Extruded Acrylic Sheet, Cast Acrylic, Cast PMMA Sheet, Frosted Satin Acrylic Main character: 1,Acrylic sheet is the best polymer transparent material, transmittance is 93%. Commonly known as plastic crystals. 2,High degree of mechanical The higher strength and impact resistance of acrylic sheet are 7-18 times higher than ordinary glass. 3,Light in weight The density of acrylic sheet is 1.19-1.20 g / cm¦ , and the same size of the material, its weight is only half of the ordinary glass. 4,Easy processing Acrylic can be used not only for cutting lathe, drilling machine for drilling, and can use acetone, chloroform and other adhesive devices into a variety of shapes and glass products. But also use blow molding, injection, extrusion and other methods of plastic molding process to the aircraft canopy. Application: Acrylic sheet are widely used for engraving sheets, advertisement sheets, instruments, parts of instrument, lamps, decorations, airplanes, automobile fittings, medical appliances, work of arts, insulation materials for electrical appliances, specimen, sign boards and various articles for light industry, culture, education and livelihood. Strong point: 1. Light transmission 92% is higher than the normal glass 91%.Surface is crystal clear, is enjoyed fame of THE QUEEN OF THE PLASTIC 2. Fine mechanical performance, it is suitable to use many performance way to make various sculpts. 3. Good resistant to Acid and corrosion, the surface is suitable to be printed. 4. Not easily fragile, the hardness is similar as copper or aluminum. 5. Good weather resistant, it is suitable to be used in outdoor of cold or hot region. The heat softening point is about 100 Degree. 6. Non-toxic, no odor, it can be used as container of food and medicine. Maintenance: 1, Temperature: the product will be softening when the temperature exceed 100 Degree, so it should avoid to use in the temperature of above 100 Degree. 2, Scratch: The surface of hardness of the PMMA sheet is similar as Aluminum, so the surface protection is necessary, if surface scratch happened, it should use the abrasive which brass used to polish it. 3, Clean: For keeping the surface clear ,when cleaning the surface, it should used the soft cloth with the suds of concentration 1% to clean it.
