Blood analysis is a very important and powerful diagnostic tool in animal health and welfare control. It is usually performed in higher vertebrates, and its reference value has been established, but fish hematology still needs further research. Many internal and environmental factors have a profound impact on the hematology value of fish, making it difficult to determine the reference value. In addition, due to the short clotting time, fish blood usually requires the addition of anticoagulants. The choice of anticoagulant is essential to obtain reliable blood test values. In this study, the effects of two common anticoagulants, K 2 EDTA (1.8 mg/ml) and lithium heparin (18 IU/ml), the hematological value of brown trout in the breeding season on the spawning season The spawner conducted an investigation.
The results of basic hematology analysis, such as compacted cell volume (PCV), hemoglobin concentration (HGB), red blood cell count (RBC), mean corpuscular hemoglobin (MCH), mean corpuscular volume (MCV), mean corpuscular hemoglobin concentration (MCHC), and White blood cell count (WBC) was compared between K 2 EDTA and lithium heparin. Statistically significant differences were observed in PCV, MCV, and MCHC, while HGB, RBC, MCH, and WBC did not show such differences. These results indicate that lithium heparin provides more reliable results because the red blood cells in the K 2 EDTA-treated samples have a tendency to swell.
The salt of ethylenediaminetetraacetic acid (EDTA) is recommended by the International Committee for Standardization in Hematology (ICSH) and the Clinical and Laboratory Standards Institute (CLSI) as the anticoagulant of choice for blood counts. EDTA acts as a chelating agent for Ca 2+ and Mg 2+ ions. It binds to calcium and is essential for the enzymatic reaction in the coagulation cascade, resulting in anticoagulation with minimal impact on cell morphology. EDTA can most reliably preserve the cells on the stained blood membrane. It is commonly used for routine hematology tests in humans, mammals and other vertebrates. It has also achieved some success in fish. However, EDTA salt has some disadvantages. In some cases, they can cause blood hemolysis, especially in specimens anesthetized with unbuffered tricaine mesylate (MS 222).
Lithium heparin is more suitable for hematological evaluation of spawning in trout than dipotassium ethylenediaminetetraacetate. Heparin does not affect the size of red blood cells, thereby minimizing the possibility of hemolysis. Compared with heparin, blood smears made from blood treated with EDTA are of higher quality. Based on current research, we suggest that K2EDTA can be used cautiously for blood count and HGB determination. In order to better understand the effects of anticoagulants on hematological parameters, further research is needed.
Commodity : Potassium sorbate Molecular formula : C6H7KO2 Molecule Weight : 15022 HS code : 29161900 CAS : 24634615� Specifications appearance : White crystal granule Production Standard : FCCIV Content : 9801010 K2CO3 : 1 max Loss on drying : 1 max Chloride : 001 max Heavy metalsas : Pb 0001 max Packing in carton 25kgs net weight Quantity 14MT loaded into 1 x 20GP Excellent preservative properitesproperites Sorbic Acid Potassium Sorbate can restrain effectively the activity of mould yeast and aerophile bateria Restrain growth and reproduction of the pernicious micro organism as pseudomonas staphylococcus salmonella action to restrain growth is more powerful than killing Meanwhile it can not restrain useful microoranganim growth ad Anaerobicbearing barilli acidophil therefore to lengthen food store peroid and remain food original flavor The preservative efficiency of sorbic acid Potassium sorbate is 510 times sodium benzoate High safety Sorbic Acid Potassium Sorbate is one kind of nonsuturated fatty acid compounds It can be absorbed by human body rapidly then decomposed into CO2 and H2Omoreover no remaining in body ADI 025mgkg based on sorbic acid FAOWHO 1994 LD50 4920 mgkglarge mouse by mouth GRASFDA 1823640 1994 Its toxicity only 112 times table salts and 140 times sodium benzoate Good stability Sorbic Acid Potassium Sorbate is stable in sealed staus will not be decomposed until 270C It will be oxidized into colored ones and absorbing moisture in case exposed in air for a long time Wide application At the momentSorbic Acid Potassium Sorbate has been used extensively in food drinkvegetables in soy tabacco drugs cosmetics agricultural products forage and other domain Its applicaion should be wide and wide in the world As acidic preservative Sorbic Acid Potassium Sorbate is also used well in neutral foodph6065 The preservative efficiency of sodium benzoate will decrease clearly and have a bed taste while ph4 Applicaion flexibilitySorbic Acid Potassium Sorbate can be used by direct adding sprayingretting dry spraying using in packing material and other method
Assay % 99.8% Moisture % 0.10% Water-Insolubles % 0.01% Chlorides % 0.03% Sulphates% 0.01% Iron% 0.01% Nitrogen % 13.8% Potassium Oxide % 46.0% Calcium and Magnesium as oxides% 0.5%
Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Commodity: Potassium Amyl Xanthate Product Nature Chemical name: Potassium Amyl Xanthate (PAX) Equivalent to : Z-6, AERO 350 xanthate Molecular Formula: C5H11OCSSK Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form Testing method: Lead acetate titration CAS Number: 2720-73-2 EINECS No.: 213-180-2 Use A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging. Specifications Chemical components Specification 1 Specification 2 Purity 85% Min 90% Min Moisture & volatiles 10% Max 4% Max Free alkali 0.5% Max 0.2% Max Packing and Storage 120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM) 850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
Commodity:Avobenzone CAS No. 70356-09-1 Molecular Formula C20H22O3 Molecular Weigh 310.39 EINEC No. 274-581-6 Specification Quality standard: USP36 Appearance Off-white powder Assay 95.0-105.0% Melting range 81.0~86.0 Impurities Any individual impurity: 3.0% The sum of all of the impurities: 4.5% Loss on drying 0.5% Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years. Reference dosage: The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%. Usage: Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin. Application: This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
Checking Item Test Standard Sodium oxide(Na2O)% 28.00-30.00 Silica(SiO2)% 27.00-29.00 Water insoluble% 0.2 Fe(ppm) 200ppm Whiteness% 80 Bulk Density 0.80-0.97g/cc PH of 1.0% Solution 12-13 Melting Point 72.2 ParticularSize % (16-30mesh) 90 98
Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard: Â Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02
