RTV-2 silicon rubber in liquid: [1]Applications of RTV-2 silicon rubber RTV-2 silicon rubber is intended for statue mold making ,candles. RTV-2 silicon rubber is applicated for plastic toys, relieve furniture. RTV-2 silicon rubber is used for architectural decoration, funiture decorative. RTV-2 silicon rubber is application for sculpture, art crafts mold making and so on. [2]Features of RTV-2 silicon rubber RTV-2 silicon rubber for statue mold making is flowing liquid with general hardness of 22-50A¡ã after curing with features: 1. Resistance to deformation and high-temperature, acid-alkali and expansion 2. Good tensile strength, tear strength and elongation 3. High reproduction times 25kgs/drum.
Liquid rtv silicone rubber for sculpture molding feature of liquid rtv silicone rubber for sculpture molding Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 a �� after curing with features: 1)low shrinkage 2)good operation 3)high tear and tensile strength 4)curing agent free 5)easy de-mold 6)high reproduction times 7)resistance to deformation and high-temperature, acid-alkali Operations of liquid rtv silicone rubber for sculpture molding If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.
1. Description of rtv 2 silicone rubber mold making for concrete casting mould C-830 liquid silicone rubber is condensation cure silicone rubber for mold making. The liquid silicone rubber will be cured under room temperature. It's two components, the mixing ratio is 100:2. Part a is a flowable liquid silicone, part b is the catalyst. It has an exceptional fluidity and good operability. 2. Characteristics of rtv 2 silicone rubber mold making for concrete casting mould An exceptional fluidity and good operability, easy to demold * good tensile strength and tear strength * suitable hardness * copy detailed pattern * good flexibility * eco-friendly * long shelf-time &lifetime 3. Application of rtv 2 silicone rubber mold making for concrete casting mould C-830 liquid silicone rubber is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations, plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. Etc. C-830 liquid silicone rubber is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation. Packing Package 25kg/drum vacuum packing for part a +1kg/ bottle catalyst for part b 200kg/drum packing for part a +1kg/ bottle catalyst for part b Shelf life 1. Twelve(12) months when stored under dry and cool place by original package under 25�?? Why choose us? 1.Free sample 2.Sample test 3.Technical support 4.Engineers site instruction 5.New products developing 6.New market developing 7.Factory visiting reception 8.China visiting reception 9.China latest silicone news 10.Related products purchasing assistance 11.More than 8 years experience in producing liquid silicone rubber
Yijiasan rtv liquid silicone rubber can be used for the molds making of plaster, concrete, pu, gypsum , artificial stone , grc , resin, plastic toys, lost wax, soap, candle, architectual decoration etc. Rtv-2 silicone rubber component a is white flowing liquid and component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Characteristics of silicone liquide for mould making 1.) amazing fluidity and easy to operate 2.) delicate design available 3.) non oily 4.) non-toxic and odorless catalyst provided 5.) easy de-molding 6.) excellent tension and tear strength 7.) high performance in duplication 8.) almost nil shrinkage below0.1 9.) excellent resistance to weather, temperature, aging, acid & aging-proofing.
Rtv-2 room-temperatue sulfureted silicon rubber Silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts, lighting and candle crafts.
applications of RTV-2 molding silicone rubber RTV- silicone rubber is mainly be used as following: 1. Decoration building mould making, including architecture column, porch column, interior column etc 2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on. 3. Concrete decoration, garden statue, plant, sculpture, Buddha and animal crafts .. features of RTV-2 silicone rubber 1. Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3. Good fluidity and excellent operation. 4. Good resistance to weather, temperature, aging, acid.. 5. Excellent tear strength, comfortable duplication times. fAQ of RTV-2 silicone rubber Why does the RTV-2 silicone mold get burnt out? The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem. for getting further information about our silicone rubber, Please feel free to contact with Miss Shameya. She can speak good Arabic and English and Chinese for an easier communication with you.
Applications of rtv-2 molding silicone rubber Rtv- silicone rubber is mainly be used as following: 1. Decoration building mould making, including architecture column, porch column, interior column etc 2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on. 3. Concrete decoration, garden statue, plant, sculpture, buddha and animal crafts .. Features of rtv-2 silicone rubber 1. Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3. Good fluidity and excellent operation. 4. Good resistance to weather, temperature, aging, acid.. 5. Excellent tear strength, comfortable duplication times. Faq of rtv-2 silicone rubber Why does the rtv-2 silicone mold get burnt out? The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem. For getting further information about our silicone rubber, please feel free to contact with miss shameya. She can speak good arabic and english and chinese for an easier communication with you. 200kg/drum, 25kg/drum
Factory Price Silicone Rubber Rtv 2
Applications of liquid pad printing silicone rubber Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. Operation Instructions of liquid pad printing silicone rubber Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
1. Application of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2. Features of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. 3. Operation instruction of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber is composed of two components.Component A is white flowing liquid while component B is the curing agent. Steps: a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly. b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Note: brushing RTV-2 molding silicone rubber is used for pouring or brushing technique. That is to say, firstly fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model,at last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. FAQ of Brushing RTV-2 silicone rubber for mold making : 1. Why is the appearance of the finished mold striate and unsmooth? It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the Brushing RTV-2 silicone rubber mold spray evenly on the product. In this case, the problem can be avoided.
C830 silicone rubber is condensation cure silicone rubber (tin cure silicone rubber) for mold making. The silicone rubber will be cured under room temperature. It is two components, the mixing ratio is 100:2. Part A is a flowable liquid silicone, part B is the catalyst. It has an exceptional fluidity and good operability. * An exceptional fluidity and good operability, easy to demold * Good tensile strength and tear strength * Suitable hardness * Copy detailed pattern * Good flexibility * Eco-friendly * Long shelf-time &lifetime
Silicone rubber for mold making is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 25kg/drum and 200kg/drum
Item: OTT-S825 Mixing ratio:100:3 Color: White Hardness: 25;¨¤2 Viscosity (mPa.s):15000;¨¤3000 Working Time (25):20-40mins Curing Time (25):3-5h Tear-Strength (kN/m):;Y25 Tensile- Strength (Mpa):;Y4 Elogation (%):;Y500 Shrinkage(%):;¨¹0.2 1kg/tin 5kg/tin ;20kg/drum; 25kg/drum; ;200kg/drum
Silicon rubber HY-638 application: Silicon RTV (HY-638 ) is two parts condensation liquid silicone rubber that can be cure under room temperature. silicon rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc. Silicon rubber(HY-638) features: HY-638# silicon rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. silicon rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicon rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2% 25KG/DRUM, 200KG/DRUM
Application of rtv-2 mold making silicone rubber: Rtv-2mold making silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. An elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. Description of rtv-2 mold making silicone rubber: Rtv-2molding silicon rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. And fabrication of precision molds. Feature of rtv-2 mold making silicone rubber: 1.Rtv-2 silicon rubber:flowable liquid silicon and curing agent. 2.Rtv-2 silicone rubber cures at room temperature within 2-4 hours. 3.An exceptional fluidity and good operability, easy to demold. 4.Good tensile and tear strength, low shrinkage. 5.High duplication times. Model number: 620 628 638 640 Fob price: usd7.0~8.5 Port: shenzhen Min: 100kg Supple ability: 4ton/per day 25kg/drum and 200kg/drum.
Brief description: Silicone rubber for mold making: 1. Resistance to deformation, high-temperature 2. High reproduction times 3. Good tensile strength 4. Exceptional fluidity and good operability. 25kg/drum
Brief Introduction Silicone rubber for molding is a kind of liquid fluid, features good fluidity and good operation, many duplication times. Applications of mould making silicone rubber Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Features of mould making silicone rubber Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50shore A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Product Specification 620# 630# 638# FAQ of mould making silicone rubber Why should the silicone mold be reused only for a few times? It can be due to the following reasons: a. Adding too much silicone oil in to silicon rubber. b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs. For getting further information about our silicone rubber, Please feel free to contact with Miss Shameya. She can speak good Arabic and English and Chinese for an easier communication with you. 200kg/drum, 25kg/drum
Usage for Pad Printing silicone rubber: Pad printing silicon rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery, etc. Features of Pad Printing silicone rubber: The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. Pad Printing silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. Payment Terms:L/C, T/T Port: Shenzhen Minimum order quantity:200kg Supply ability:8 tons/day Deliverly Time:within 3 days after getting bank receipt Package:25kg/drum and 200kg/drum
Mould making silicon rubber Applications of mould making silicon rubber Silicon rubber for mould making is mainly used for poly resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candle crafts, plastic toys, stationary gifts crafts industry, a large statue Buddha, large-scale cement mold, aninamls and plants sculpture, relievo furniture, cultural relic product, etc. Features of molding silicon rubber: Silicon rubber for mold making with general hardness of 22-55 A0 after curing. Molding silicon rubber is a kind of flowing liquid which features with good resistance to deformation, good tensile and tear strength, acid-alkali as well as high reproduction times, good flowability and easy operation. Payment Terms:L/C, T/T Port: Shenzhen Minimum order quantity:200kg Supply ability:8 tons/day Deliverly Time:within 3 days after getting your payment Package:25kg/drum and 200kg/drum.
Pad printing silicone rubber applications The pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface. Pad printing silicone rubber features description Pad printing silicone rubber with high print times and abrasion resistance, without any impurities, with good printing effects, permanent and durable, we can provide all kinds of colors and our catalyst is free charged.
