Rtv-2 Mold Making Silicone Rubber

Supplier: RTV 2, Liquid Silicone Rubber, Mold Making Silicone, Silicone Rubber for Mold, Skin Like Liquid Silicone Rubber

Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum

applications of RTV-2 molding silicone rubber RTV- silicone rubber is mainly be used as following: 1. Decoration building mould making, including architecture column, porch column, interior column etc 2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on. 3. Concrete decoration, garden statue, plant, sculpture, Buddha and animal crafts .. features of RTV-2 silicone rubber 1. Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3. Good fluidity and excellent operation. 4. Good resistance to weather, temperature, aging, acid.. 5. Excellent tear strength, comfortable duplication times. fAQ of RTV-2 silicone rubber Why does the RTV-2 silicone mold get burnt out? The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem. for getting further information about our silicone rubber, Please feel free to contact with Miss Shameya. She can speak good Arabic and English and Chinese for an easier communication with you.

Applications of rtv-2 molding silicone rubber Rtv- silicone rubber is mainly be used as following: 1. Decoration building mould making, including architecture column, porch column, interior column etc 2. Unsaturated rein crafts, epoxy resin crafts, poly resin crafts, plastic toys and so on. 3. Concrete decoration, garden statue, plant, sculpture, buddha and animal crafts .. Features of rtv-2 silicone rubber 1. Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3. Good fluidity and excellent operation. 4. Good resistance to weather, temperature, aging, acid.. 5. Excellent tear strength, comfortable duplication times. Faq of rtv-2 silicone rubber Why does the rtv-2 silicone mold get burnt out? The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem. For getting further information about our silicone rubber, please feel free to contact with miss shameya. She can speak good arabic and english and chinese for an easier communication with you. 200kg/drum, 25kg/drum

Mould making silicone rubberApplications: Mould making silicone rubberwith the hardness of 25-30 shore A, is specially suitable for medium crafts mould making and duplication of poly resin crafts in pouring way, PU crafts, gypsum or plaster, unsaturated resin, lighting and candles crafts, plastic toy, stationery gifts crafts, large statue buddha, furniture decoration, cement, articficial stone, etc. Mould making silicone rubber Advantages: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength. Description ofMould making silicone rubber: Mould making silicone rubbermainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. Features ofMould making silicone rubber (1)high tensile & tear strength (2)Low linear shrinkage (3)free Curing agent (4)brushing & pouring (5) high duplication times (6)easy operation (7)High temparate resistance,acid and alkali -resistance UsingMould making silicone rubber advantages: * Reusable * Molds can be used over and over again. * Does not shrink * Has good abrasion resistance. * Comes in a wide range of hardnesses and therefore gives long mold life. * Can be poured, brushed or sprayed on to the original model. * Is the most economical overall (compared to other mold rubbers). Storage and precautions for liquid silicone rubber Liquid silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date ofproduction. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. 1kg/tin; 5kg/tin; 20kg/drum; 25kg/drum; 200kg/drum

Mould making silicone rubber Applications: Mould making silicone rubber with the hardness of 15-30 shore A, is specially suitable for mould making and duplication of poly resin crafts in pouring way, PU crafts, gypsum or plaster, unsaturated resin, lighting and candles crafts, plastic toy, stationery gifts crafts, large statue buddha, furniture decoration, cement, artificial stone, etc. Advantages: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength. Description: Mould making silicone rubber mainly used for making molds, casting, brushing, potting, sampling, including plaster models, simple products, products with different patterns, as well as product models with stable size and non-deformation. Features: (1)High tensile & tear strength (2)Low linear shrinkage (3)Free Curing agent (4)Brushing & pouring (5)High duplication times (6)Easy operation (7)High temperate resistance, acid and alkali -resistance Using XD silicone advantages: * Reusable * Molds can be used over and over again. * Does not shrink * Has good abrasion resistance. * Comes in a wide range of harnesses and therefore gives long mold life. * Can be poured, brushed or sprayed on to the original model. * Is the most economical overall (compared to other mold rubbers). Storage and precautions: Liquid silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. Any questions of Mould making silicone rubber, please feel free to contact Victoria: MOBILE:086-15910679670 Website: www(dot)xdsilicone(dot)com E-MAIL: silicone(at)xindeglass(dot)com 1kg/tin; 5kg/tin; 20kg/drum; 25kg/drum; 200kg/drum

Liquid rtv silicone rubber for sculpture molding feature of liquid rtv silicone rubber for sculpture molding Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 a �� after curing with features: 1)low shrinkage 2)good operation 3)high tear and tensile strength 4)curing agent free 5)easy de-mold 6)high reproduction times 7)resistance to deformation and high-temperature, acid-alkali Operations of liquid rtv silicone rubber for sculpture molding If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.

Supplier: Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc

Silicon rubber HY-638 application: Silicon RTV (HY-638 ) is two parts condensation liquid silicone rubber that can be cure under room temperature. silicon rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc. Silicon rubber(HY-638) features: HY-638# silicon rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. silicon rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicon rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2% 25KG/DRUM, 200KG/DRUM