1. Application of Brushing RTV-2 molding silicone rubber :
Brushing RTV-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2. Features of Brushing RTV-2 molding silicone rubber :
Brushing RTV-2 molding silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
3. Operation instruction of Brushing RTV-2 molding silicone rubber :
Brushing RTV-2 molding silicone rubber is composed of two components.Component A is white flowing liquid while component B is the curing agent.
Steps:
a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.
b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.
c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note: brushing RTV-2 molding silicone rubber is used for pouring or brushing technique. That is to say,
firstly fix the product or sole model to be duplicated onto a plane plate,
then enclose the plane frame with wooden plates to prevent the leakage of the silicon ,
thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model,at last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
FAQ of Brushing RTV-2 silicone rubber for mold making :
1. Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the Brushing RTV-2 silicone rubber mold spray evenly on the product. In this case, the problem can be avoided.
1.Application of brushing rtv-2 molding silicone rubber : Brushing rtv-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2.Operation instruction of brushinng silicone rubber : Brushing rtv-2 molding silicone rubber is composed of two components.Component a is white flowing liquid while component b is the curing agent. Steps: A. Take silicone rubber of 100g and add 2% curing agent for mixing evenly. B. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. C. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Note: brushing rtv-2 molding silicone rubber is used for pouring or brushing technique. That is to say, Firstly fix the product or sole model to be duplicated onto a plane plate, Then enclose the plane frame with wooden plates to prevent the leakage of the silicon , Thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100: 2 and pour them onto the sole model, At last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. 3. Storage and precautions of brushing molding silicone rubber : 25kg/drum, 200kg/drum
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum
Supplier: Plastic scrap (ldpe, pp, pvc, pet, pmma, hdpe, bopp, pe, ps, abs etc)., textile waste (cotton hosiery clips, cotton thread waste), denim, unbleached, selvedges rama string, rags for mattresses, wiping rags, licekrin dropings 100% cotton bales, card fly etc.) paper scrap
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).