Optical Bypass Protection System Module OBP Module
Features
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Modularized Design
Specifications
Parameters Unit SUN-OBP-SS-L
Wavelength Range nm 1260 ~ 1650
Test Wavelength nm 1310 / 1550
Insertion Loss dB Typ: 1.2 Max: 1.5
Return Loss dB SM 45
Crosstalk dB SM 50
PDL dB 0.20
WDL dB 0.30
PD dark current nA 1
PD responsivity mA/W 24 ~ 40
PD report accuracy dB (at -50 to 23 dBm)
Operating voltage V 4.5 ~ 5.5
Operating current mA 80 ~ 120
Operating Temperature -5 ~ +60
Storage Temperature -30 ~ +80
Dimension mm 1208018
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km.
The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
QSFP-40G-ESR4 850NM 300M/400M MPO TRANSCEIVER
Item NO.: EQ854X-3MCD03
Date rate: 40G
Wavelength: 850nm
Distance: 300M
Connector: MPO
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1. High Channel Capacity: 40 Gbps per module / Up to 11.1Gbps Data rate per channel;
2. Maximum link length of 300m links on OM3 multimode Fiber or 400m links on OM4 multimode fiber;
3. High Reliability 850nm VCSEL technology / Electrically hot-pluggable;
4. Digital diagnostic SFF-8436 compliant / Power dissipation < 1.5 W;
5. Case operating temperature range:0°C to 70°C .
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
Application
â?¢High-speed interconnects within and between switches, routers and transport equipment
â?¢Server-Server Clusters, Super-computing interconnections
â?¢Proprietary backplanes
â?¢Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
â?¢40GBASE-LR4 Ethernet links
â?¢InfiniBand SDR, DDR and QDR application
Feature
â?¢QSFP+ MSA, SFF-8436 compatible
â?¢Four independently addressable transmit and receive channels
â?¢Highly compact: savings of 60% on edge and board usage compared to four comparable SFP+ modules
â?¢Electrically hot-pluggable
â?¢XFP-like latch mechanism for ease-of-insertion
â?¢Optical connectivity via industry standard MPO/MTP terminated fiber ribbon
â?¢Digital Diagnostics Monitoring Interface. allows customer management and monitoring of key modules parameters, analogous to SFP+
USD110 for 100G rate QSFP optical transceiver module
155M-400G optical transceiver modules
We provide 155M-400G rate optical transceiver modules that are compatible with different brands of switches (e.g., Cisco,Huawei,H3C,ZTE,Dell,HP,Mellanox,Mikrotik,Netgear,Brocade,Juniper,Extreme,Quidway,Aruba,Intel,etc.).These optical transceiver modules with wavelengths ranging from 850nm to 1610nm are available in SFP,SFP+,XFP,X2, XENPAK,SFP28,QSFP+,QSFP28 packages.Transmission distances are LRM,SR,LR,ER,ZR,and up to 160 km.
Our optical transceiver modules have competitive prices. For example,the unit price of optical transceiver module that replace the Cisco SFP-10G-SR is around USD14 FOB China,and the unit price of optical transceiver module that replace the Cisco QSFP-100G-SR4 is around USD110 FOB China.
Welcome to purchase our optical transceiver modules.Thanks.
SINY OPTIC-COM CO.,LTD. was founded in 2008, is ISO9001 and ISO14000 optical components manufacturer in China.
SINY main products:
Free Space Optical Isolator
Polarization Dependent Isolator
Polarization Independent Isolator
Collimator Receptacle
Receptacle With FA
SINY's collimator Receptacle have two type: A-Lens Collimator Receptacle, C-Lens Collimator Receptacle.
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB
Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm
Max Cable Distance 10Km Connector Simplex LC
Transmitter Type DFB BiDi Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength 1310nm
Max Cable Distance 10km on 9/125um SMF Connector Duplex LC
Transmitter Type DFB 1310nm Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength 850nm
Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC
Transmitter Type 850nm VCSEL Extinction Ratio 2dB
Media MMF Power Consumption
GLsun QSFP28-100G-LR4 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four electric-absorption modulated lasers (DMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
Compatible Cisco Form Factor QSFP28
Max Data Rate 28Gbps data rate per wavelength Wavelength 1310nm
Max Cable Distance 10km link length Connector Duplex LC
Transmitter Type LAN WDM DML Extinction Ratio 4dB
Media SMF Power Consumption
GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.
Product Features
4 WDM lanes MUX/DEMUX design
4 WDM channels are 1296, 1300, 1305 and 1309 nm
Hot-pluggable CFP2 footprint
RoHS compliant and Lead Free
Up to 10Km link length
Power dissipation
Features
- 4 independent full-duplex channels
- Up to 11.2Gb/s data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Up to 100m transmission on OM3 multimode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0 to 70oC
- XLPPI electric interface
- Maximum power consumption 1.5W
- RoHS-6 compliant
Applications
- Rack to Rack
- Data Center
- Infiniband QDR, DDR and SDR
- 40G Ethernet
QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.
Multi-mode Transceivers
Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver.
400G QSFP-DD SR8
The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA.
Single-mode Transceivers
Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance.
400G QSFP-DD DR4
The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD DR4+
The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD LR4
The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD Loopback
The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Models: Angle of LKD - 4 x12-3528-3030:62 x144 ° : matching LED Cree 2835 3030 size: 250 x 74 mm material: optical level PC and heat-resistant: - 40 ° ~ 120 ° standard: SGS/ROHS environmental protection authentication application: suitable for solar street lamps, communities and the new rural lighting, street lighting and other LED applications at a high speed.Product features: 1. The surface is in the shape of peanut meters, with good evenness and good light efficiency.2. Matched LED with uniform light spots, no astigmatism, no black spots, and very high transmittance without shadow, can maximize LED light utilization rate; 3. This product uses the high precision, aspheric optical design, original installation import optical PC raw materials, to ensure enough injection molding (reduce shrinkage products) we have good quality, and strict with product, all conform to the country and the export standards, the product uses the antistatic shockproof packaging.All products have passed SGS certification and meet ROHS environmental requirements.
40G QSFP+ to QSFP+ DIRECT ATTACH CABLES
ITEM NO.:EQSPPD4A-324CXX
DATA RATE:40G
PRODUCT ORIGIN:Made in China
SHIPPING PORT:ShenZhen
Features
Compliant QSFP MSA specifications
Fully compatible with IEEE802.3ba and Infiniband QDR specifications
40Gb/s total bandwidth
4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbps data rates
100 ohm differential impedance system
Single 3.3V power supply, low power consumption,
Features
- Compliant with SFF-8402 and SFF-8432.
- Up to 25.78125 Gbps data rate per channel
- Up to 5m transmission
- Single 3.3V power supply
- Lowest total system EMI solution
- Optimized design for signal integrity
- Operating temperature: -5~70â??
- RoHS compliant
