Polyester Resin Suppliers and Manufacturers

Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120 150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110. 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.

Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.

Bare flat aluminium wire is wire made by oil-free electrician round aluminum rod, electrician flat aluminium wire by continuous extrusionhas advantages of fine surface, burr-free,low resistivity. It can be used as finished product and intermediate product. It is widely used in motor, transformer, electric welder and other similar equipment.

Low acid value and dry blend to matting with high AV Polyester Resin High acid value dry blend to matting with high AV Polyester Resin

Very good drying time with Isocyanates Excellent film hardness and durability Excellent glossy finishing and coverage Specially used for glossy PU topcoat coatings Use with proper catalyst 50% or 100%

Polyester Resin - Saturated. 100% Solids (granular/pellet form) Applications: Paints, Coatings, Inks Soluble variety of solvents. Contact directly for TDS & Samples

Cheap price good quality , it is helpfule for making powder coating. Weaves bag, 25kg/p, standard

Polyester Resin for Outdoor Matt Paint 93/07 Polyester Resin With Excellent Outdoor Durability 93/07 Polyester Resin for Transferring Coat 92/08

FEATURES Excellent drying with Isocyanates Excellent clear surface High sealer quality APPLICATION PU sealers and ligh matt finish topcoats Matt PU coatings High sealer quality CHARACTERISTICS Solvent Xylene Solids 60 +/- 1% Hydroxyl value on solid 115 +/- 5 Oil length 33 +/- 1 Viscosity (Gardner scale @ 25o C Y - Z Acid value 14- 17 Color (Gardner) 3 max Clarity Clear SOLUBILITY DATA Aliphatic Solvents Limited Aromatic Solvents Soluble Ketones Soluble Esters Soluble COMPATIBILITY DATA Medium oil alkyd Compatible Long oil alkyd Compatible Rosin maleate Compatible DELIVERY FORM DETAILS Supplied at 60% in Xylene packed in Mild steel drums (Net. weight 200kg SHELF LIFE Minimum 12 months when stored under standard storage conditions

Hi,friend This is Sara from Kingkonree(KKR) which is mainly supplying Solid surface sheet,Quartz stone,Basin/Sink,Bathtub,Shower tray,Finished products(such as table/bar tops) and all customized mold products. We can advise on suitability, performance and design with our 19 years experience. Kingkonree offers more than 100 design to choose from, also we have our own mold workshop,which can meet your special customized requirements. Please do not hesitate contact with me if anything I can do for you.

o Button Our customers in Vietnam used our resin producing Polyester Button to export to European and USA markets which require high quality product: FB (SHEET/ROD/DECORATIVE) o Corrugated and flat Paneling, Roofing sheet: CP (HAND LAYUP/MACHINERY) o Artificial Fine Art Item, Polymer Casting, Solid surface CC (CASTING) o Artificial Marble, Onyx, Sanitary ware/Kitchen/Bathroom fixer AM (CASTING/HAND LAYUP) o Fiberglass Reinforced Plastic/FRP Composite: GF (HAND LAYUP) o Boating, Canoe, o Cooling Tower, Tank, Cabinet, Rubbish Bin o Flower Pot, Stage case, Table, Chair, Bench, Door o Cladding, Grating, Ladder, Tray, Rail o Bumper, Spoiler, Side skirt, Road signage o Plywood Laminate: DP o Polyester Putty: PC.

Unsaturated polyester resin - Used in FRP moulding, laminating and lining applications In 35kg, 55kg, 230kg of packing

ISOLATOR B is an isolating primer based on saturated polyester resin and poly- functional isocyanate polymers.

Tmpde£¨cas rn: 682-09-7£© is a compound of three kinds of allyl ether, full name is trimethylolpropane diallyl ether, including monoallyl ether, diallyl ether, triallyl ether. Because of such structure, tmpde becomes an excellent air drying agent, is widely used in the production of unsaturated polyester resin (upr), and modified acrylic resins (uv) mainly.

Product Details: Name:Enameled aluminum wire Type:Insulated Application:super enameled wire used for transformer Conductor Material:Aluminum, Aluminum Wire Gauge:a:1-10,b:3-16 Standard:IEC, NEMA,GB ,SGS Certification:UL,SGS,ISO14001,IS09001 Factory history:20 years Manufacturing Experiences Cooperative Client:oversea 200 customers Delivery:Timely delivery guarantee url:http://www.ybtransformer.com

We would like to introduce polres polyester, one of the leading polyester resin producer from turkey. Our company was established at gebze, kocaeli, geposb industrial area in 2003. Our proven quality ensures customer satisfaction and our competitive marketing policy is the very nature of our success in both local and international markets. In our own facilities we produce -general purpose polyester resins, -grp type polyester resins, -putty type polyester resins, -marble adhesive type polyester resins, -casting type resins, -acrylic type resins, -smc / bmc resins, -button type resins, -pipe type resins, -gelcoats, -pigment pastes, and more. With our huge web of contacts with (www.Polrespolyester.Com.Tr) my products, we are here to supply all type of products demands with our broad style of basin collection and technology. Please be informed that all kinds of orders with different style and packaging are welcomed. Our company is supplies its costumers different sizes of high quality products in european standards. Kindly do not hesitate to come with further enquiry and demand our specs, samples. Your own specs and packaging requests are also welcome. We do business in eastern europe, middle , bulgaria, germany, poland , our aim is to meet the requirements of our customers in the most appropriate way and time. Besides our current products, we also accept all kinds of oem projects in accordance with customized request. In case you are interested in our company and products portfolio, we would be happy to contact you and send any further information regarding the specifications and quotations of the products. We hope that your kind reply will found a long-lasting business relationship with you as well. (we look forward to hearing from you soon for a mutual beneficial cooperation with your esteemed company.) Yours faithfully, Skype:caysekoc Best regards Aishe koch

180-grade Polyester Resin Enamelled Aluminium Flat Wire Henan YuBian Electric Co., Ltd. Add:Qianlong industrial park Huixian City Henan Province