And have a monomode otical input suitable for 1290 to 1600nm wavelengths, a teminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75ª+
The amplifier supply voltage pin Connect to 24V (DC).The modules have a monomode optical input Suitablefor 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75ª+.
Structure: Coating Package size: 10 thickness 0.65mm Induction type: capacitance principle press type Sensing area: 6.0*6.0 Cold screen unlock:
Product description: Dl2102c is designed as a wifi module based on qca 9531. It adopts openwrt system, which is a highly modular, highly automated embedded linux system. Applications: Wireless router Smart gateway Iot application Smart sensor and controller Features: Support wireless router and related application Open-wrt system Support 802.11 b/g/n wireless standards. Support wep, wpa/wpa2-psk Support multiple network protocols Option on board antenna or external antenna Support uart, gpio interface
Embedded tiny high power poe pse module Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design. Below are the key features of pse-hqd Ieee802.3af compliant. Per port maximum output pse-hqd, 650ma. Pse-hqd supports high power mode and backward compatible to normal power mode. Maximum total power protection. Support pd power classification from class 0 to class 4. Per port over/under voltage protection. Per port short circuit protection. Per port over current protection. Thermal cut off. Equip common mode choke (per port) to reduce emi. Enhance current surge protection. Per port pse status indication. 1.Tiny size 92mm(l)x 25.1mm(w)x24mm(h)
Embedded normal power poe pd module Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design. Below are the key features of pse-qd 1.Ieee802.3af compliant. 2.Per port maximum output pse-qd, 450ma 3.Maximum total power protection. 4.Support pd power classification from class 0 to class 4. 5.Per port over/under voltage protection. 6.Per port short circuit protection. 7.Per port over current protection. 8.Thermal cut off. 9.Equip common mode choke (per port) to reduce emi. 10.Enhance current surge protection. 11.Per port pse status indication. Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information. 1.Tiny size 92mm(l)x22.1mm(w)x24mm(h)
12w output embedded poe pd module(tpd-50) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-50 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h). F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
16W Output Embedded PoE PD module(THPD-33) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. Below are the main features of thpd-33 modules A.Isolated pd module, isolation level 1.5kv B.Backward compatible ieee802.3af C.Support wide input voltage range, 36vdc to 55vdc. D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33) E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space. High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules. 1.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
12W Output Embedded PoE PD Module(TPD-12) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-12 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h)) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
BRAND: WEST PID TEMPERATURE CONTROLLER WEST Controller: Model: WEST-6100+,P6100 Model: WEST-4100+,P4100 Model: WEST-8100+,P8100 Features and Benefits: Dual setpoints & optional remote selection Plug-in output modules allow installing just the functions needed in Expanded user-selectable operator modes in User-selectable plug-and-play output cards in Process and loop alarms in Adjustable hysteresis in Optional 10V SSR driver in Improved Windows PC configuration software Improved easy-to-use HMI Jumperless input configuration Auto-hardware recognition Faster communication speeds More security options Backward compatible panel cutout, housing and terminal wiring capability P6100/P6170/P8100/P4100
PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit. Features: 01. On-board Function Generator. 02. Transmitter : 1 No. 03. Receiver : 2 Nos 04. Fiber Optic Analog Link. 05. Fiber Optic Digital Link. 06. Signal strength indicator. Technical Specification: 01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible. 02. Receiver : 2 Nos. silicon photo detectors 03. Modulation : Intensity modulation. 04. Driver Circuit : Analog and digital configuration for 635 nm LED. 05. Analog Bandwidth : 35KHz. 06. Digital Bandwidth : 50KHz. 07. On-Board Function Generator : 08. Sine Wave &TTL Square Wave : 09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz 10. Amplitude : 0 to 4Vpp. (Except Square) 11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER 12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power. 13. Fiber Optic Cable: 14. Type : 1000 micron Step Index, Multimode Plastic Fiber 15. Fiber Lengths : 1&5 Meter. 16. Power Supply : GND, +5V, +12V, -12V at100mAINT.
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm Max Cable Distance 10km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm
Summarize The NE100 Optical transmission platform can be as a converge center of optical transmission system in headend and hub to increase network reliability, scalability and cost-effective deployments. NE100 provide high usable module density (up to 14 modules in 4RU chassis), smart management in local or through SNMP, simplified installation, optional redundant powering, hot-swappable modules. Features Convenient: Blind-mate RF adaptors on the back-plane. Simple insertionand removal of modules; vacuum fluorescent display and navigation buttons for use as a simple interface for local status monitoring and control High Density: Capable of accommodating up to 14 application modules in a 4RU chassis Universal: Application modules can be located in any slot. Hot-swappable Modules: All application modules are hot-swappable modules, time-delay and protection circuit inside Intelligence: CPU intelligent system controller, monitoring the output voltage of power module and the system temperature; Blue-Screen VFD display the work status of the system; Element Management interface and independent TCP/IP server, ease to manage remotely High Reliability: two additional slots in the rear accommodate the AC and/or DC power supplies (120/240 Vac or -48 Vdc). One is main power supply, another is redundant, heat switched automatically Configurations Chassis Model Descriptions NE100-H Housing (only),no power NE100-H1 Housing, 1 NE100-PSAC NE100-H2 Housing, 2 NE100-PSAC NE100-H3 Housing, 1 NE100-PSDC NE100-H4 Housing, 2 NE100-PSDC Powering Modules Model Descriptions NE100-PSAC AC Power Supply 180~264V,50/60Hz NE100-PSDC DC Power Supply,-48v Application Modules Module Descriptions TFT100-(output power,mw) Forward 1310nm Optical Transmitter 4~20mw TFR100 Forward optical receiver TRR100 Single Reverse Optical Receiver TRR120 Dual Reverse Optical Receiver TRT100F Reverse Optical Transmitter,FP TRT100D Reverse Optical Transmitter,DFB TRT100C Reverse Optical Transmitter,CWDM NE100-H Chassis Technical Specifications Items Specifications Dimensions(Hí-Wí-D) mm 177í-437í-550 Slots 14 Power supply AC,180~264v 50/60 Hz, or DC,-48V RF Connectors F-Type Weight kg 20 Ordering Information: Model Number Descriptions NE100-H Chassis (only),no power NE100-PSAC AC Power Supply 180~264V,50/60Hz NE100-PSDC DC Power Supply,-48v NE100-H1 Chassis, 1 NE100-PSAC NE100-H2 Chassis, 2 NE100-PSAC NE100-H3 Chassis, 1 NE100-PSDC NE100-H4 Chassis, 2 NE100-PSDC PS100 AC & DC Power Supplies Summarize The PSAC and PSDC are power supply modules that provide AC and DC voltages for the NE100 optical broadband transmission platform, the module is installed in the rear of the Housing accommodates two power supplies for true power source redundancy. When two power supplies are used, the load is shared between both supplies. If one supply fails, the other immediately picks up the additional load. Features 1. High reliability. 2. Low output voltage 3. Dual power supply hot-switched Specifications Input Voltage 180-270V 50HZ AC 40-72VDC DC Output +24.4V7A +5.4V 8A -5.4V 8A Efficiency >85% Note: PSDC-48V, -48V DC Power Supply. 10KG
2MP Camera Module Face Recognition Camera Module Description: Face recognition is mainly used for identity recognition.Due to the rapid popularization of video surveillance, many video surveillance applications urgently need a kind of fast identification technology under the condition of long distance and users' uncooperation, in order to quickly confirm the identity of people from long distance and realize intelligent early warning.Face recognition technology is undoubtedly the best choice. Using fast face detection technology, we can find the face from the surveillance video image in real time, and compare it with the face database in real time, so as to achieve fast identity recognition. 003-0691 is a 2MP HD USB camera module, using latest 3.0m pixel with ON Semiconductor DR-Pix technology with dual conversion gain1/2.7" AR0230 sensor. The max frame rate 1920*1080p@30fps. This camera module has an excellent performance on AI face recognition application.� It also widely be used on access control system, LED display etc. Key Features of 2MP Camera Module: 2MP� HD Resolution:� Full HD support at up to 1080P 30 fps for superior video performance.� High precision and high quality pictures! Web camera captures your clips in true 2MP, and 30 frames per second,high pixel technology for sharp image and accurate color reproduction. � Wide View of Angle & Wide Dynamic Range: 2MP USB camera module with a wide angle rage at FOV 95degree without distortion. This camera module has a 96dB of wide dynamic range, you could caputure a clear image at different light condition, even under backlight condition.
Powellenses is one kind of opticaruling lens, xi'an lingyue machinery&electr.Ltd.Cnsupply powellenses that divergence angle from 10íp to 100íp, the standard have 30íp\45íp\53íp\60íp\70íp\85íp\90íp. When 1mm laser bean get through the powellenses, it is optimized transformed a line which is uniform, stability, straight .Lineation by powellenses is better than aspheric lensse, as by powellense can cancelling centrahotspot of gaussian beams and fade-marginadistribution. Applied range: Laser scriber Machining -position by makeing Building- graticule by makeing Laser scanning system Customs can order by index following Divergence angle Work distance Beam wavelength or beam diameter Width of lineation. Standard: Divergence angle materials 30íp bk7 45íp sf6 53íp bk7 60íp sf6 70íp sf6 85íp sf6 90íp sf6.
Relife RL-071B 4-in-1 optical fingerprint calibrator for Android Phones Huawei MI Oppo Vivo fingerprints repair. Relife RL-071B optical fingerprint calibrator used to solve mobile phone screen fingerprint failure. RL-071B fingerprint calibrator suitable for Huawei/MI/Oppo/Vivo to solve the fingerprints problem under the screen or poor input after screen replacement. Features: 1. Solve the problem of the fingerprint display under the calibration screen cannot be recognized after the screen is changed. 2. Suitable for Huawei/Xiaomi/Op/Vi to solve the problem of the fingerprints under the screen or poor input. 3. Use with software/tutorials, easy to use, no cumbersome steps. 4. Solve the problem of screen fingerprint failure after the mobile phone is replaced. 5. 4 IN 1 fingerprint calibrator, no disassembly calibration, convenient and fast. 6. Easy to operate. 7. Quick calibration. 7. Small and portable.
Specification - High stable Xe white light source: Color temperature: 5,500k - 6,000K Optical instability =250 lux Green light: peak@550nm+/-5nm; >=300 lux Blue light: peak@475nm+/-5nm; >=100 lux - White light intensity: >= 8,000 lux - Light intensity adjustment: 0~100% with 0.1% resolution Max 4-order light intensity dynamic range Application - Optical Fingerprint Sensor testing - Development of Fingerprint Recognition Algorithm in ISP Chip - Sensor Properties test and analyze - Analyze the image qualities of the Optical Sensor Module
Flyin Optronics offers a full range of CWDM Mux-Demux and Optical Add Drop Multiplexer (OADM) units to suit all kinds applications and network solutions. Some most common ones are: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. Flyin Optronics' Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Our CWDM Mux Demux products provide up to 16-channel or even 18-channel Multiplexing on a single fiber. Due the the low insertion loss is needed in WDM networks, we can also add ¡¡ãSkip Component¡¡À in a CWDM Mux/Demux module to reduce the IL as an option. Standard CWDM Mux/Demux package type include: ABS box package, LGX pakcage and 19¡¡À 1U rackmount. BY customer request
