Rigid endless passenger elevation (man-riding) hoist designed to be used with unlimited rope lengths for lifting and lowering personnel. Capacities range from 400kg to 1000kg at either 9 or 18 m/min. The Rigid LTD-P Series unlimited cable (wire rope) passenger lifting hoist is the nearest alternative available in the market place to the Tractel Tirak XP Series manriding hoists. The new Rigid LTD-P Series endless hoist is versatile and suitable for unlimited applications. The rope is not connected which makes it compact, lightweight and very easy to handle. The unrestricted wire rope lengths capability of the Rigid LTD-P Series makes it possible to utilise unlimited lifting heights and traction lengths. Features and Benefits 1.The robust, precisely machined housing of die-cast aluminium, ensures a low dead-weight and outstanding rigidity. 2. Gearing and drive sheave is fabricated from hardened steel. 3. Universal attachment of the winches is capable by means of a central 16mm load pin, or two M10 screws. 4. Motor protection: Protected to IP55 as standard. 5. Standard LTD-P series operating voltage: 380V, 3ph, 50Hz (voltage and frequency are available upon request). 6. Control Voltage: 24V for mobile application units and 42V for the stationary applications models. 7. Phase monitoring: As standard on mobile application models, not available on stationary units. 8. Hoist motor, as standard is fitted with a thermal overload protection device. 9. Certification: Certified by and independent inspection institute (TUV). 10. Drive sheave and pressure rollers of special nitrided steel with a surface hardness of approximately 70 HRC, guaranteeing low wear of these components. 11. The fully-synthetic special oil ensures highest possible efficiency for quiet running characteristics, in a temperature range of -40°C to 70°C. 12. Standardised components ensures easy access to all wearing parts.
CD or MD model wire rope electric hoist is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions. MD model wire rope electric hoist have normal and slow lifting speeds which make it lift steadily and accurately. CD&MD model monorail wire rope electric hoist can be widely used to hoist heavy objects, or installed on the straight or curve I-section steel beam or single beam overhead cranes or single beam gantry cranes. They can also be used together with electric hoist type double beam overhead crane or Double beam gantry cranes or jib cranes. All the above has made the electric hoists common in industrial and ore enterprises, railway, wharfs and warehouses. Capacity: 0.5T, 1T, 2T, 3T, 5T, 10T, 16T, 20T. Lifting height: 6m, 9m, 12m, 18m, 24m, 30m, and Max. 100m.
CD or MD model electric hoist can be widely used to hoist heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoists common in industrial and ore enterprises, railway, wharf and warehouses. CD or MD model monorail wire rope electric hoist is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. CD model electric hoist has one lifting speed. MD model electric hoist has normal lifting speed and slow lifting speed which make it lift steadily and accurately.
Rated volt:220v 50hz Input power :1000w Lifting speed:single-hook 12 m/mim double speed:6 m/min Reated capacity:single hook:500kg double hook:1000kg 1 pc in a carton Nw:31kg Gw:32kg Packing size:45*34*27
Quick Information Brand Name: LieDiaoPlace of Origin: China Description Details Mini electric hoist: Mini electric hoist(small type electric hoist/civil electric hoist )divides fixed type and running type with simple structure, convenient installation, small and exquisite, single-phase power supply.It is widely used in various occasions, it can lift objects below 1000KG, especially for lifting from ground to high-rise buildings. With the advanced technology and good raw materials, the working time of our Mini electric hoist is longer than other suppliers. We can produce by customer requirements. Features 1.Fixed device: thickened steel, high affordability, convenient installation. 2.Motor shell: it is made of aluminum alloy, can protect the durability of the motor effectively. 3.Lifting hook: a high-strength die forging hook. In the case of accidental overload, it will not suddenly broken but deformed gradually. Forged by high-grade alloy steel, is is good toughness. 4.Hoist switch: wired switch voltage is 36Vl with modern design, which makes you more secure. 5.Limiter: When the lifting objects reaches the limiter, it will automatically stop running. 6.Power supply: home 220V power, the power is plugged in, easy to use. 7.High-quality CCC certified wire: thicker CCC certified wire, safe operation, durable longevity. 8.Hoist shell: A3 stainless steel with spray treatment, solid and durable. 9.High-quality anti-rotation wire rope: thicker and solid wire rope, high bearing capacity and will not break. 10.Motor: twined by copper wire,fast dissipation, high temperature resistance. The shaft is extended, copper wire is extended, which will be more durable and more efficient. 11.Thermal protection device: Protection class IP54, the motor runs some time later, it will automatically power off. 12.Motor housings, gearbox housings are made of thicken steel. 13.Packing: Carton box and foam inside, transport safely. Certificates CE : 0141 Price Price Condition : FOBPrice : USD200 / setDelivery Port : Tianjin Packaging & Delivery Packing :By carton box or Wooden box according to differentDelivery Lead Time : 3-7 working days according to different quantitiesMinimum Order : 1 setSupply Ability : 2000sets/weeks.
1. Capacity from 1ton to 80ton; 2. Lifting height from 6m to 100m; 3. Lifting speed is double speed or frequency inverter control; 4. Traveling speed is controlled by frequency inverter. 5. Working duty class are FEM 2m, 3m; 6. Working environment temperature: -25~+42 certigrade; 7. Working elevation: within 1000m; 8. Low working noise;
Wire rope electric hoist application 1. Cd and md wire rope electric hoist is small type lifting equipment, which can be installed on single beam overhead crane, single beam gantry crane, jib crane or i-beam. 2. Cd wire rope electric hoist lifting speed is 7 m/min, md wire rope electric hoist has two lifting speed: 0.7 m/min and 7 m/min. 3. Working conditions: * ambient temperature should be no more than 40 oc. * controlled by push button or remote with vvvf. * forbidden to use in easily combustible, explosive, corrosive, electromagnetic, electric hoist, melting metal, overloading and dust works. 4. Wire rope electric hoist specification: Loading capacity: 0.25 ~ 80t Lifting height: 3 ~ 50m Lifting speed: 0.3 ~ 8m/min Power supply: 220 ~ 440v, 50/60hz, 3phase Wire rope electric hoist features 1.Compacted structure, save the space 2.Aluminum alloy body, low self weight 3.Free-maintenance design, interchangeable of components; 4.The gear transmission was harden treatment, low noise, environmentally friendly 5.The waste spare parts wonâ??t make a destory to surrounding environment 6.Convenienct installation flexible operation.
The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
The electric hoist we produce can be used in factories, mines, agriculture, electric power, construction building site, dock And warehouse for installation of the machineslifting the cargoes, loading and unloading the trucks, The product we produced is in compliance with the national standard, the design is ressonalbethe materials are of good Qualitythe structure is advancedthe appearance is beautiful and the size is compactihe weight is light, the hand pull force issamll, and the parts have high strengthbig tenacityand all these make it safe, durable, and the products are popular at home and abroad, it can be compared with the famous brand product in the world.
Low headroom electric hoist (chinese style) introduction: Light weight for itself, working class is high Safe, reliable, and low malfunction. Low working noise, extra overhead, superior braking force. It is stable that no fall off out chain wheel during working. The structure is tighness and lifting higher than others.
Explosion-proof electric hoist introduction: Compact structure design & easy installation, economical & widely used.
Lifting large objects or pieces of equipment is the purpose of an electric wire rope hoist. It is typically mounted overhead and can be stationary or travel back and forth on a rail. Industrial hoists usually consist of an enclosed electric motor that turns a grooved drum. 1)Wrapped around the drum is a wire rope which is constructed of numerous metal strands coiled together. One end of the wire rope or ropes attaches to the drum by iron clamps, The other end or ends descend through an enclosed tackle device. Suspended from the tackle is a large hook and spring latch closure. The number of ropes traveling through the block tackle varies according to the weight limit of the device. 2)Motor adopts frequency conversion motor, the lifting stability, low noise, stable and reliable transmission, low energy consumption; the butterfly brake, brake is flexible and reliable, higher safety performance. 3)Control : lifting the standard frequency control, stable and easy to control play ping 4)Wheel : use 45 steel heat treatment, tooth surface high-frequency quenching, high wear resistance and long life 5)Travel limit¡êoto prevent the misoperation caused by rush 6)Wire rope ¡êo the M5 level, and adopts the European high strength steel core line 7)The high limit of two sections: a cut, a cut off the power supply, dual protection 8)Hook group :composed of a pulley and hook is made of nodular cast iron with large diameter, the antifriction roller bearing, the bearing manufacturer for SKF or FAG , safety is equipped with spring pressure can prevent slip hook for quenched and tempered steel 34CrMoV, according to the standard of DIN17200. 9)Product features: job level is high, can be applied to all kinds of bad place, and the price is materially beneficial. Electric wire rope hoist is essential in raising working efficiency and improving working conditions. It is also equipped with overhead crane, gantry crane, jib crane as the lifting mechanism. SMF company is top electric hoist manufacturer in china, It has excellent quality¡ê¬materially beneficial price and considerate after-sale service. Hot sale in over 500 countries and regions. Include girder cranes, under running crane, semi gantry cranes, jib cranes, open winch, crane fittings and all kind of electric hoist.
Power - master electric wire rope hoists designed & manufactured as per is: 3938 are compact and modular with easy in operation & maintenance. Frame All steel fabricated machined and bolted type. The gear box is rigidly aligned with the end load plates by substantially holding the transfer members which also form the motor platform for foot mounted motors. Rope drum
The CD1, MD1 electric wire rope hoist is one kind of small light crane equipment, mainly structures include speed reducer, travelling mechanism, coiling block, hook, coupling, Soft cable current introducer & limiter. It uses the taper rotor motor, which contains the driving force and braking force. The electric block has the features of compact, light, small-sized shape and smooth operation, it is the necessary crane machinery for the industrial & mining enterprise, storage, wharf and cargo lift producing occasion. It can be mounted on overhead I beam independently and also can be used with electric & manual single beam, double beam, and cantilever & gantry cranes together as a complete set.
Capacity 2 ton (two Falls 10mm Rope) BP Hoist Motor 2 HP / 960 / B5 90 Frame Class 4 S1 Duty, lifting Speed 3 meter / minute, Lifting height 8 meter / minute Cross travel 13 meter / minute / 0.5HP Control Panel, Electric Trolly, Rope Guide,Bottom Block,4 way Switch
Capacity 3 ton (Four Falls 10mm Rope) BP Hoist Motor 3 HP / 960 / B5 100 Frame Class 4 S1 Duty, lifting Speed 3 meter / minute, Lifting height 8 meter / minute Cross travel 13 meter / minute / 0.5HP Control Panel, Electric Trolly, Rope Guide,Bottom Block,4 way Switch
•Capacity: 0.5T ~ 80T •HOL (STD.): 6M ~ 15M •HOL Speed: SINGLE; DUAL = 3:1, 6:1, 10:1; VARIABLE (INVERTER) •HOL Motor: FEM 2m (STD), IP54, F-GRADE INSULATION •Duty: 40% ED (STD.), 60~80% ED (OPTIONAL) •Trolley Speed: SINGLE, DUAL, OR INVERTER •Control Panel: 2-WAY ~ 6-WAY CONTROL •Pendant: 2-WAY ~ 12-WAY (MAIN/AUX) + EMERGENCY STOP •Limit Switch: 2-STEP UP, DOWN, NORTH, SOUTH, EAST, WEST •Protection: OVERLOAD DEVICE •Main Voltage: 220V ~ 600V, 50HZ OR 60HZ, 3PH. •Control: 48V OR 110V. •Fixed type •Monorial type •Low headroom type •Double girder type Wire Rope Hoist Specification •New design •Ease of maintenance •Low noist emission •Consistent performance Hoist Motor: High-resistance diecasting motor combines with low starting current and high starting torque Disc Brake: Built-in long life span electromagnetic disc brake. Limit Switch: 2-Step Limit Switch preventing wire rope from over turning. Wire Rope: Long-life span filer type rope used. Hook Block: The diameter of the sheave is larger than the drum diameter to ensure longer life cycle for the wire rope. The sheave is totally made out of ductile cast iron for higher abrasion resistance, and covers the hook block entirly Hook: Fitted with a safety latch preventing slings from slipping off Control Panel: Easy access latched cover along with beautifully laid out wiring for easy error detection and maintenance Gear Box: Dual step oil bath type reducing mechanism gears are built in as single unit for easier overhaul and assembly, also comes with oil level monitor as standard. Trolley Wheel: Eccentric shaft for auto balancing while traversing along rail. Push Button Control: Easy of operation and designed with low control voltage. Comes with main voltage ON / OFF control.
With little modification, it can also be used as a winch. It is widely used in factories, mines, harbors, warehouses, goods yards, shops, etc. It is necessary equipment to increasing working efficiency and improving labor conditions. Cd1 model electric hoist has only one speed, it can meet general requirements. Md1 model electric hoist provides two speeds, normal and low speed, low speed is one over ten of normal speed. When working at low speed, it can meet the strict requirements of precise loading and unloading, sand box mold, machine tools maintenance etc. So, md1 model electric hoist is used more widely than cd1 model. Model lifting capacity(tons) lifting height(m) lifting speed(m/min) travel speed(m/min) wire rope Rope dia. Specification Md1 0.25 3/6/9 8/0.8 20 3.6mm 619 0.5 6/9/12 8/0.8 20 4.8mm 637+1 1 6/9/12/18/24/30 8/0.8 20 7.7mm 637+1 2 6/9/12/18/24/30 8/0.8 20 11mm 637+1 3 6/9/12/18/24/30 8/0.8 20 13mm 637+1 5 6/9/12/18/24/30 8/0.8 20 15.5mm 637+1 10 6/9/12/18/24/30 7/0.7 20 15.5mm 637+1 16 6/9/12/18/24/30 6/0.6 20 24mm 637+1 20 6/9/12/18/24/30 3.5/0.3 20 20mm 637+1
offering different size of wire rope
