Dsc Pure Sine Wave Inverter Suppliers and Manufacturers

1. Pure sine wave power inverters are featured as high reliability, and low failure rate, 2.Input & output fully insolated. 3.Soft start: Smooth startup of the appliances. 4.Pure sine wave output waveform: Clean power for sensitive loads. 5.Two LED indicators on the front panel shows the working and failure state. 6.Protection, inputlowvoltage protection, input overvoltage protection 7.Small and light: With the technology of CPU centralized control and SMD inside, 8.The product is very small and light. 9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans 10.Saves the power and improves the working efficiency. 11.Low noise but high efficiency while working. 1500W Pure sine wave power inverter Max continuous power : 1500w Peak Load Power Rate:3000w No load Current: less than 0.6A Input DC voltage Range:DC10-15.5V / DC20-30V Output Voltage Range:AC120/220V±5% Output Frequency Range:50/60+/-3Hz Max Outer Temperature:less than 65c Max Power Efficiency:> 86% High Voltage Cut Off Level:>DC15.5V / >DC30V Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V Overload and Short-circuit Protection:yes Input Voltage:less than DC10V / less than DC20V THD :less than 5% cooling : Fan

Introduction: The I-P-PPI 1000W design of pure sine wave inverter are ultimate choice of appliances demand a clean, pure source of AC power.This inverter is a high conversion efficiency model and continuous working module generating a sinusoi-dal wave from a 12/24V/48V - battery bank, which can supply energy to various loads such as resis-tive load (heater),inductive load (air conditioners, refrigerator),motors (vacuum cleaners), and rectifier load (computer). It is compatible with optional accessories such as the Remote ON/OFF Control unit and the selectable sockets. Application: Designed for a variety of applications such as residential, commercial, emergency and vehicles, constructi- on and solar & wind system etc. Product Features: 1. Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current. 2. It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. How- ever ordinary capacitor will explode if the temperature become very high. 3. Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break. 4. All the protection signal adopt monolithic processing.Circuit is simple and stable. 5. Input and output are isolated to ensure the operation stability 6. Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady. 7. The whole design adopt patch technology.The circuit is simple and steady. 8. Optional remote ON/OFF control switch; 9. Smart protection function with LED and alarm show. Protection: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Battery reverse polarity protection. 420MM*203MM*90MM 4.1KG.

Prc-psw series inverter-pure sine wave Size:32/18/38(cm)

we are a professional manufacturer of inverters DC12V24V48V OU AC110V 220V 230V 240V 50/60HZ

Product Introduction SANDI Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter�¢??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer�¢??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger

1. Main Features: 1. Input & output is fully insolated to endure impact of sensitive appliances and protect the inverter from being easily damaged. 2. High Surge: High surge current capability starts difficult loads such as TVs, camps, motors and other inductive loads. 3. Soft start: Smooth start-up of the appliances. 4. Pure sine wave output waveform: Clean power for sensitive loads. 5. Low total harmonic distortion: Below 5% 6. Stable working performance: Even in the situation of under voltage or over voltage, the inverter could endure 10% voltage fluctuation until it shutdowns. 7. Cooling fan with internal temperature sensor will turn on automatically when the inverters becomes warm and turn off after the temperature dropped. 8. LED indicator on the front panel shows the working and error state. 9. Digital displays indicate battery voltage and inverter output voltage. 3. Protect functions: 1. Over load protection 2. Over current protection 3. Over voltage protection 4. Low voltage protection 5. Surge protection 6. Short circuit protection 7. High temperature protection 8. Reverse connection protection 9. External fuse protection 10. Buzzer alarm function 4. Applicable for: ( Solar/Wind/Home System ) 1. Travel set equipment 2. Industrial equipment 3. Office equipment 4. Kitchen equipment 5. Household electrical equipment 6. Power tools 5. Technical Parameter: Input: Input voltage: DC12V/DC24V/DC48V Working Voltage: DC10V-15V/DC20V-30V/DC40V-60V Input current: 83A/41.67A/20.83A Standby input power: 1200W Short circuit protection Digital display Indicator:  Inverter woking: green light on Inverter problem: no 110V/220v display Protection alarm:  Low input voltage alarm: buzzer Low input voltage protection: no display, buzzer and inverter stop working High input voltage protection: no output voltage display, have input display, inverter stop working. Over load protection: voltage drop to 55-140V Abnormal temperature: no AC display, buzzer and stop working. Environment: High temperature protectioin: =70ºC Working Temperature: -10ºC~40ºC Cooling mode: Intelligent Temperature control Fan Package included: 1* QW-P1000 (360*170*135mm/6kg) 1* battery clamp 1* spare part 1* english user manual 1* standard packing box -

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

1.Running without battery 2.Pure sine wave inverter 3.Off grid 4.MPPT controller:80A 5.Maximum PV Array Power:2KW 6.Voltage:24V

1000 watt inverter pure sine wave A solid choice for your mid-range power needs, the REP1000, REP1000 pure sine wave inverter offers plenty of clean AC power for all your portable electronic equipment. The Go Power! REP1000 inverter is ideal for handling sensitive loads and for improving AC equipment performance in systems with 12 VDC input. A solid choice for powering electronic equipment like TVs, stereos, computers, or as a source of emergency backup power, the Go Power!? REP1000 is suitable for a range of applications. 1000 watt inverter pure sine wave Ideal for powering office equipment, television, DVD, Video Games, battery chargers and other sensitive loads from your car, truck, boat, RV, or Solar System batteries! url:http://www.rogerele.com

Description The ROGER 2000W Pure Sine Wave Power Inverter is a high-quality solar accessory that is perfect for off-grid systems. A power inverter is an electrical device that transforms the DC power stored in batteries into standard household AC

6000 watt pure sine inverter The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties. A built-in 50 amp transfer switch allows the product to automatically switch from using a battery bank to shore power. This is great in the event of a power outage, as the product will automatically detect the outage and redirect power from your backup battery bank. It also has a built-in 45 amp battery charger which uses AC power, from the grid or from a fuel-powered generator for example, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank. url:http://www.rogerele.com

Models 0.5 kva to 10 kva Input voltage range 150v to 280v, 90v to 120v Input frequency 47 û 53 hz, 57 - 63 hz Output voltage 220/110vac¦10%, (mainsmode) 220/110vac¦2%(inverter mode) Output frequency 50/60hz ¦ 0.1 hz Outputwave form Pure sine wave Harmonic distortion < 2% on inverter mode Protections Input under voltage & over voltage, overload, short circuit, battery low, battery over charge, reverse phase As per requirement

Modified sine wave inverter Continuous power: 2000w Peak power: 4000w Input voltage: 10-15vdc or 21-28vdc Output voltage: 110 / 220 / 230 / 240 vac Output wave form: modified sine wave Frequency: 50hz or 60hz Low input voltage warm: (10.5 +/-0.5) / ( 20.5 +/-0.5)v Low input voltage protection: (10 +/-0.5) / (20 +/-0.5)v Fuse:7x35a Dimension:42x20x8cm Weight:5.3kgs Packing:color box Packing size:52x29x26cm Qty:2pcs/ctns G.W:12kgs Container 20ft:1300pcs Automatic thermal shutdown Low battery alarm / shutdown Short circuit protection Overload protection Over heat protection Over-voltage protection Built-in cooling fan Full input and output protection Reverse polarity protection We have ce-lvd, ce-emc, e8, rohs approval etc