Introduction:
The I-P-PPI 1000W design of pure sine wave inverter are ultimate choice of appliances demand a clean, pure source of AC power.This inverter is a high conversion efficiency model and continuous working module generating a sinusoi-dal wave from a 12/24V/48V - battery bank, which can supply energy to various loads such as resis-tive load (heater),inductive load (air conditioners, refrigerator),motors (vacuum cleaners), and rectifier load (computer). It is compatible with optional accessories such as the Remote ON/OFF Control unit and the selectable sockets.
Application:
Designed for a variety of applications such as residential, commercial, emergency and vehicles, constructi- on and solar & wind system etc.
Product Features:
1. Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current.
2. It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. How- ever ordinary capacitor will explode if the temperature become very high.
3. Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break.
4. All the protection signal adopt monolithic processing.Circuit is simple and stable.
5. Input and output are isolated to ensure the operation stability
6. Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady.
7. The whole design adopt patch technology.The circuit is simple and steady.
8. Optional remote ON/OFF control switch;
9. Smart protection function with LED and alarm show.
Protection:
Battery over-voltage and under-voltage protection
Over-temperature shutdown
Automatic overload protection
Short-circuit protection
Battery reverse polarity protection.
420MM*203MM*90MM 4.1KG.
Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
Home ups and small office use: IG series: 300W-1200W Pure sine wave online Inverter IP/OP: 110/120VAC 50/60Hz IP/OP: 220/230/240VAC 50/60Hz. Key features User selectable for accepting wider input voltage Full automatic and silent operation Rack Tower design High Frequency Off mode charging Available in five AC outlet configurations: NEMA, Schuko,French, India, and BS1363 Compact size for convenient use and storage. Built-in 8Amp super charger for up to 100Ah battery Small scale and cost effective inverter for home appliancesand office equipment Two-steps intelligent charging control to recharging time Our inverter is smart and stable for home and office use. Cartons,foam and woond
1000w pure sine wave inverter Battery : 12v /200ah Output : 220v /50hz Input : 130v-270v protection : short circuit, over load,low battery,Full charge.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
1.Main Features: a. Durable construction for long life under extreme environmental conditions b. Low idle current (less than 1 watt) conserves energy when no loads are present c. power Inverter has soft start capability for starting heavy loads d. Built-in starting control circuits for two- and three-wire generator starting systems e. Simplified controls with a snap-on cover that protects settings from being accidentally changed f. Better thermal performance allows full output power to 50¡ãC (122¡ãF) without de-rating g. High surge capacity starts more difficult loads and handles overload conditions reliably h. Durable powder coated, corrosion resistant steel chassis i. New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF switch and status indicators j. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance. 2. Protection Features: A. Battery over voltage and under voltage protection B. Over temperature protecton C. Automatic overload protection D. Short circuit protection. F.pure sine wave inverter g. pure copper transformer h.1kw to 6kw available i. low frequency inverter j. huge charge current k. support solar system, generator.
Out put waveform: pure sine wave inverter Continuous power: 500watt Surge power: 1000 Watt Input volt: 12V/24V/48/110V DC Output volt: 100V/110/120/220/230/240 V AC Frequency: 50Hz/60Hz Efficiency: >85% No load current draws :