EN-GJS-400-15 EN-GJS-500-7 EN-GJS-600-3
Austempered ductile iron Used in industrial machineries Placed in containers by shipment
We are manufacturer of Ductile Iron Products.We also Work with customised as per your requirement.
Ductile Iron Casting
Ductile Iron Pipe as per list
Ductile Iron Pipe Ductile iron pipe refers to the pipe made by high-speed centrifugal casting of centrifugal ductile iron machine after adding spheroidizing agent to the molten iron above No.18. Definition:� Ductile iron pipe factory refers to the pipe made by high-speed centrifugal casting of centrifugal ductile iron machine after adding spheroidizing agent to the molten iron above No.18. Features:� It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. Use:� Mainly used for municipal, industrial and mining enterprises water supply, sewage, gas transmission, etc. Chemical composition:� The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe dimension is from DN80 to DN2600. The wall thickness of the 100mm ductile iron pipe is 6mm. The underground pipe installation method of the ductile iron pipe is simple and fast. If you want to know the tongmao pipeline, please contact me.
Ductile iron Drainage pipe Ductile iron Drainage pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). China tongmao ductile pipe is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). Ductile iron Drainage pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. ductile iron pipeline wholesale have a number of advantages over other pipe materials: Easy to install Full range of accessories are widely available Suited to a host of applications both above and below ground Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe price list is very reasonable. Cast iron pipe drain pipe the cast iron sewage pipe and the cast iron gas pipe are widely used. The wall thickness of the 150mm cast iron pipe is 6mm. More information.
Ductile iron feed pipe Ductile iron feed pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. Ductile iron feed pipe supplier is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598). ductile pipe manufacturer is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. Tongmao Ductile iron feed pipe have a number of advantages over other pipe materials: Easy to install Full range of accessories are widely available Suited to a host of applications both above and below ground Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe lengths is generally six meters, which can also be customized. If you want to know the ductile iron pipe sizes and dimensions, please contact us.
Re mg ca si almax 0.5-0.8 6.0-8.0 1.8-2.1 44-48 1.0 0.7-1.0 5.0-6.0 1.5-2.0 44-48 1.0 0.8-1.2 6.0-6.5 0.8-1.2 44-48 1.0 1.0-1.5 5.5-6.0 1.0-1.5 43-45 1.0 1.2- 1.5 5.0-6.5 1.0-2.0 43-48 1.0 1.5-2.0 5.5-6.0 2.0-3.0 40-44 1.0 1.7-2.1 5.0-6.0 2.0-3.0 40-50 1.0 2.0-2.5 5.0-5.5 2.0-2.5 43-47 1.0 2.2-2.8 5.0-6.0 1.0-2.0 44-46 1.0 2.5-3.0 7.0-9.0 2.5-3.5 44-48 1.0 3.0-3.5 7.0-9.0 3.0-3.5 43-46 1.0 3.5-4.5 3.5-4.5 0.8-1.0 44-48 1.0 Size:2-12mm;5-25mm;10-30mm Packing: 25kg bag in 1mt big bag or 1mt big bag Chemical composition/size/packing can be adjusted according to customer's requirement. 25kgs or 1mt bags
Face to Face: BS EN 558-1. Flange: BS EN 1092-2. Working pressure: PN10/16. Size: DN50-DN600.
Mzt learnica a.D. Skopje is stakeholder company in private ownership for manufacturing of castings from gray, ductile iron and nonferrous metals, with an almost 70 years tradition.We have implemented fully encircled technological line starting from manufacturing pattern equipment, core making, moulding, pouring, shot blasting, machining, coating, packing, and warehousing in own store for selling. Nmzt learnica a.D. Skopje has qualified labour force which is in system of continuous education for performing of following tasks: Manufacturing of pattern foundry equipment from wood, plastics and metal. Manufacturing of cores with co2 procedure and shell procedure. Moulding on lines (800x1000; 1200x1600; 800x800; 630x500 and hand moulding). Own plant for epoxy coating. Own plant for classic painting. Own plant for machining, lapping, milling, and shave. Euro pallet 1 tonovgv
Ductile iron pipe from DN80-DN1600. K7, K8, K9 T type, according to ISO2531/EN545. Bulk or 20/40gp.
As per specification ISO 2531/BSEN545/EN598. Can be supplied in loose/bundled conditions in containerized shipment/break bulk mode.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 (BS EN1092-2:1997, DIN2501) Use : For water , sewage and neutral liquids to max .70C The dismantling joint enables easy installation and dismantling of isolating valves , non return valves , flow metering equipment , pumps etc. It compensates for axial displacement of the pipe during installation/dismantling . Features: 1) Follower gland ring : Ductile Iron GGG500-7 2) Flanged Adaptor bodies : Ductil iron GGG500-7 3) F-piece pipe : Ductile iron GGG500-7 4) Bolts, Nuts and Washers Material : Carbon Steel Grade 4.8 with Zinc Coating , Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 5) Tie Rods : Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request . 6) Gaskets material : For water or Gas : NBR Grade A . For drinking water : EPDM rubber to BS2494:1990 type W . For drinking water and sewage : SBR Grade F . 7) Body Coating : Fusion Bonded Epoxy Coating inside and outside or bitumen 8) Sizes : DN50 - DN2000 9) Pressure Grade : PN10 / 16 / 25 10) Package : Bubble plastic bags, Cartons and Wooden cases. Suitable for all flanged piping materials above ground or in chamber. Flanges and drillings to ISO7005-2 ( BS EN1092-2:1997,DIN2501).
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
1), Product Information The ductile iron pipe manufactured by vortex are mainly used for transferring the drinkable water,waste water and for irrigation. The diameter is from DN80-DN2000,K8/K9/K10/K12, Tyton socket and spigot,the standard length is 6m. 2),Standard conform to ISO2531/EN545/EN598/4179/8179 3), Material Ductile Iron GGG500-7&400-12 or ASTM-A-536grade 80-55-06 4) coating Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). Epoxy coating available upon request. 5) joint method available Push-on 6), Process centrifugal casting 7), Inscription Style As per customers' requests Standard Inscription 8), Packing standard export bundle in bulk As per customers' requirements 9), Inspection Foundry in-house Third Party inspection available upon request . More information is available upon receipt of your enquiry.
EN545 Ductile iron pipe fittings With epoxy coating From DN40-DN600 Standard Eur patterns
K9/ C40 BS EN 545:2006 (Water application) BS EN 598:2007 (Sewerage application) Pipe Size Lth/bdl Qty per 40' Weight(Kg) Trailer(Max) K9 DN100 24 288 113 DN150 15 240 172 DN200 12 192 231 DN250 4 & 6 88 301 DN300 4 & 6 80 406 DN350 4 64 500 DN400 4 & 6 40 592 DN450 4 32 695 DN500 4 & 2 24 807 DN600 3 18 1047 DN700 3 16 1379 DN800 1 12 1687 Standard length 6m (Socket, Spigot)
Specilized Manufacturer for ductile iron pipe fittings in china,such as elbow,reducer,tees,bends,bushing,flange adaptor,coupling,etc. Including three types: 1. Ductile iron fittings for Upvc pipes, 2.Ductile iron fittings for DI pipes to BS4772/ISO2531/BS EN545, 3.Ductile iron fittings with loose flanges for DI pipe to EN545 In plywood/wooden cases
