Ductile iron feed pipe
Ductile iron feed pipe is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Ductile iron feed pipe supplier is available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission and distribution (in accordance with BS EN 545) and sewerage (in accordance with BS EN 598).
ductile pipe manufacturer is simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications.
Tongmao Ductile iron feed pipe have a number of advantages over other pipe materials:
Easy to install
Full range of accessories are widely available
Suited to a host of applications both above and below ground
Strength of the material allows it to withstand significant internal pressure and also makes it less susceptible to impact damage
It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation.
The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium.
The ductile iron pipe lengths is generally six meters, which can also be customized.
If you want to know the ductile iron pipe sizes and dimensions, please contact us.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
Ductile Iron Pipe as per list
Ductile iron pipe from DN80-DN1600. K7, K8, K9 T type, according to ISO2531/EN545. Bulk or 20/40gp.
As per specification ISO 2531/BSEN545/EN598. Can be supplied in loose/bundled conditions in containerized shipment/break bulk mode.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
1), Product Information The ductile iron pipe manufactured by vortex are mainly used for transferring the drinkable water,waste water and for irrigation. The diameter is from DN80-DN2000,K8/K9/K10/K12, Tyton socket and spigot,the standard length is 6m. 2),Standard conform to ISO2531/EN545/EN598/4179/8179 3), Material Ductile Iron GGG500-7&400-12 or ASTM-A-536grade 80-55-06 4) coating Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). Epoxy coating available upon request. 5) joint method available Push-on 6), Process centrifugal casting 7), Inscription Style As per customers' requests Standard Inscription 8), Packing standard export bundle in bulk As per customers' requirements 9), Inspection Foundry in-house Third Party inspection available upon request . More information is available upon receipt of your enquiry.
EN545 Ductile iron pipe fittings With epoxy coating From DN40-DN600 Standard Eur patterns