butyl tapes are waterproof and insulated tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Butyl Tapes Are Waterproof And Insulated Tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation - 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility Â40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. pplications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Design 1)gb/t19519-2004 Iec61952, ansi 2)10kv, 115kv, 161kv, 230kv, 252kv¡.. 3)self-refined silicone rubber with imported raw material from dor corning co. Usa, fumed silica is imported from cabot co. In the usa and wacker co. In germany. 4)weathershed silicon-rubber sheds are the feature of taiguang technology. 5)made of ecr core 6)advanced compressing technique of metal end fittings Performance: Excellent electrical insulation properties and restoration of insulator performance High mechanical strength Good features of light weight, self cleaning, easy to install, anti-aging. Good resistance to soiling and flashover Hydrophobicity of sheds meets class hc1. We can make long rod suspension composite insulator, line post composite insulator, interphase composite spacer, pin composite insulator, electric railway composite insulator, etc. Wooden case/barrel.
Hms 1& 2, hms 1, pns, al 6063.Transportation and shipping, brokerage service
Voltage rating class kv: 25, 46 & 69 - easier construction thanks to the light weight - excellent impact resistance - excellent mechanical properties - the characteristic to repel water of polymer material
1.Polymer Insulator Character: 1.1High mechanical strength; 1.2Good performance of hydrophobicity and anti-pollution; 1.3 Excellent electrical Performance; 1.4 Small volume and light weight. 2.TID polymer Insulator Character: 2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle. 2.2 Good Raw material : We use HTV silicone rubber which hydrophobicity can reach to HC1 level We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 100 m. We use ECR rod as the core which is high acid resistant. 7200Hr testing passed . 2.3 Special marking design. We use the double seal design between the rubber and the fitting. We can mark your logo on the fitting or rubber. 2.4 Excellent Manufacture Technology: Perfect match between fitting and rod With imported end-fitting crimping equipment ,ensures the mechanical performance of the product Perfect bound between silicone rubber and the rod. 2.5 The unique end fitting sealing structure improves product sealing reliability 2.6 The strict inspection measures ensure the perfect quality of every product. Product Advantages: 1.Light weight It is small in size and in light weight, it is about 1/5 to 1/9 of the porcelain insulator in the same grade voltage, so itâ??s convenient for transportation and installation. 2.Good Anti-pollution Composite insulator has a good anti-pollution performance, so it can operate safely in polluted area, it requires neither annual cleaning or maintaining at zero. 3.High Anti-fouling property Good aging resistance performance, strong ability of anti-pollution flashover and good electric corrosion resistance, can ensure that the internal insulation core will not be affected by moisture. 4..Strong shock resistance Composite insulators have good brittleness resistance, strong shock resistance and there no brittle fracture accident. Composite insulators are interchangeable with ceramic. 5.Stable Performance The composite insulator has high mechanical strength, reliable structure and stable performance, which provides a guarantee for the safe operation of the line.
End fitting for composite insulators include:socket ball, tongue clevis, oval-eye, cross arm, flange, pin, bolt, large spindle etc. The material could be forged steel, casting steel or as client's request. Wooden pallet or as request.
Our advantage: we not only produce silicone rubber, but also glass fiber rod by ourselves to assure the quality and best price. Features of insulator: 1) Silicon Rubber for sheds/ housing 2) Glass-fiber reinforced epoxy resin rod (ECR type) for core 3) Hop dip galvanized cast steel for metal fittings 4) Rated voltage:10KV~220KV 5) 5000hours aging test. 6) IEC Standard. Standard.
Composite Insulator Design: 1) GB/T19519-2004; IEC; ANSI 2) KEMA certification, ISO 9001 3) 10~1000kV / 70~600KN 4) Material: composite Polymer 5) Self-refined silicone rubber with imported raw material from DOR CORNING CO. USA; Fumed silica is imported from CABOT CO. in the USA and WACKER CO. in Germany. 6) Weathershed: silicon-rubber sheds are the feature of TAIGUANG technology. 7) Made of ECR core, acid and high temperature resistance. 8) Metal end fittings: advanced compressing technique with Acoustic Emission Detector imported from Finland. Performance: 1) Excellent electrical insulation properties and restoration of insulator performance 2) High mechanical strength 3) Good features of light weight, self cleaning, easy to install, anti-aging. 4) Good resistance to soiling and flashover 5) Hydrophobicity of sheds meets class HC1 . Wooden case/barrel
It has good performance of hydrophobicity and anti-pollution. The main model are FZSW-10KV/4KN, FZSW-22KV/6KN, FZSW 132KV/10KN.
800kv composite insulator
10-1000kv composite insulator
Snack, chips, biscuits, beverage, crackers, confectionery, food, chocolate, milk, candy, wafer, soap, shampoo, body wash, hair care, detergent, fabric care, toothpaste, conditioner, dishwashing, personal care, toiletries, household, oral care, consumer goods, diapers, hygiene, instant noodle, food, beverage, powder drink.Product sourcing, quality checking, regulatory compliance, document provision, shipping
Fs-10/2.5 Fs-10/5 Fs-15/6 Fs-20/5 Fs-35/5 Fs-35/6 Fsw-110/10 Notes: product information given in above is just for reference. We can design and make products in accordance with the specific requirements of the customers or the drawings provided by the customers. Excellent hydrophobicity. Excellent electrical insulation properties. End fittings are crimped onto fiberglass rod with voice-operated displacement type crimper. High mechanical strength. The connection location between end fittings & rods is fused with sheds housing by the overall high temperature vulcanized silicone rubber injection molding as it could minimize the interface. Composite Cross-arm Insulator Composite-cross-arm-insulator is suitable for the innovation of urban electrical network where its streets are narrow. It can effectively reduce the neccessary height of the pole or tower. Due to high bent resistant capacity, there will completely avoid the case that porcelain cross-arm happen to crack. Moreover , it can be well pollution resistance.
Fpq-10/4t20 Fpq-10/2.5 Fpq-10/5t20 Fpq-24/8 Fpq-33/5 Fpq-33/12.5 Fpq-36/8 Notes:product information given in above is just for reference. We can design and make products in accordance with the specific requirements of the customers or the drawings provided by the customers. This product performs well in resisting impact, earthquake, and brittle fracture. High hydrophobicity, tensile strength, and flexural strength. High mechanical strength. Light in weight, convenient to install. Excellent resistance to aging, tracking, and erosion. With high mechanical strength, this product performs well in resisting impact, earthquake, and brittle fracture. The pin composite insulator is used in high voltage lines. It has excellent resistance to aging, tracking, and erosion. It also has high hydrophobicity, tensile strength, and flexural strength. With high mechanical strength, this product performs well in resisting impact, earthquake, and brittle fracture. Light in weight, it is convenient to install. In addition, the top and bottom installation dimensions are the same with those of porcelain type pin insulator, so these two products can be interchanged with each other.
Aluminum flat rolled products, Building sheets Closure stock, Fin stock, Hot rolled plates, Pattern sheets, Cable wrap stock, Cold rolled coils, Flooring sheets/tread plates, Lamp cap stock, PCB entry sheets/coils, Circles, Cold rolled sheets, Foil stock, Litho stock, Spiral fin stock .
F-grade DMD (6641) polyester film polyester fiber non-woven soft composite material Features and Applications: Polyester film polyester fiber composite material is a composite material made of polyester film coated with F-grade adhesive on both sides, and polyester fiber nonwoven fabric on both sides. The heat resistance rating is F grade, with good dielectric performance and high mechanical strength, suitable for Y series and J02 series motors, as well as slot and turn to turn insulation in electrical appliances.
Low & High Voltage Silicon Rubber Insulator Long Rod Composite Suspension Insulator Manufacturer Composite Suspension Rod Insulator (Export Type) Installation Instruction: 1. The transportation and installation of the insulator shall be taken good care without any throwing or collision, fiction with various sundries(wires, iron plates and tools etc.) and solid material. 2. When suspending the composite insulator, the knot shall be made on the attachment at the end. Knot on shed or sheath are strictly prohibted. When the rope has to be contacted with shed or sheath, the contacting area shall be packed with soft cloths. 3. Never apply the composite insulator as the assistant tool for the wire distribution and collecttion and collection in case that the insulator can be damages by impact or bending moment. 4. Do not step on the insulator shed with foot. 5. When installing the grading ring, attention shall be attached on the adjustments to make sure that the ring is vertical with the axial of the insulator. And for opening grading ring, the openning directions at both ends shall be consistent to facilitate the discharging and protect the shed. ______________________________________________________________________________ This's Jack from Nengxing Electric Power Equipment (China). We're an innovative high-tech enterprise integrating Rï¼?D, production, service and construction of surge arrester, composite insulator, fuse cut-out, etc. (as the attached pictures) We undertake a national technical project and supply for the State Grid of China.
Composite Station Post Insulator Name: Composite Station Post Insulator No.: F-003 Addtime: 2017-06-22 Views : 25 General Introduction Sali supply Suspension Clamp, Pole Line Hardware, Eye Bolt, Pigtail Bolt, Insulator, Polymer Insulator, Orcelain insulator, Precing Connector, Preformed Guy Grip, Vibration Damper, Fastener etc. All of them with best quality and low price. This product is applied to high voltage power line service, and has features of good hydrophobicity,anti-aging, anti-leakage trace and electrical erode proof, tensile strength and bending strength, strong mechanical strength, with good performance in shock resistance good quakeproof & brittle-break proof, light weight, easy to installation, and the installation outline of top and base are the same size with porcelain pin type, they can exchange to use each other. Sali is a leading manufacturer of Insulator, Polymer Insulator, Orcelain Insulator, Glass Insulator, Guy Grip Deadend, Composite Pin Insulator, Wedge Tension Clamp, Anchor Clamp etc. Welcome to contact us to know more. Main Technical Parametes (performance meet GB/T20142-2006 IEC61952) Product Model Rated Voltage (kv) Rated Mechanical Bending Load (kn) Rated Catileve Load (kn) Structure Height H. (mm) Min. Arc Distance (mm) Min. Creepage Distance (mm) Diameter of Shed (mm) Lightning Impulse Withstand Voltage (peak)(kv) P.F.1min Wet Withstand Voltage (virtual value)(kv) FZSW-10/5 10 5 0.6 215 125 290 100/90 75 42 FZSW-15/5 15 5 0.6 245 170 600 138/118 105 45 FZSW-20/8 20 8 1.2 400 300 920 122/92 125 50 FZS-20/8 20 8 1.2 420 320 700 138 125 50 FZSW-35/6 35 6 2 460 360 900 148/118 185 95 FZSW-66/8 66 8 1.5 770 650 1930 160/130 325 140 FZSW-66/12 66 12 2 760 630 1940 215/185 325 140 FZSW-110/6 110 6 1.5 1150 1050 2950 160/130 325 200 FZSW-110/10 110 10 4 1220 1060 3260 215/185 450 200 FZSW-220/10 220 10 4 2250 2050 6520 215/185 950 395 Note: 1.The mini creepage distance is a little different as per product height. â?¢ 2. The product height and top, bottom accessories install dimension could be choosed from table, also could be supplied their dates to us by yourself. The 220kV insulator could be one section , and also two sections. 3. 110~220kV composite core post insulator only could be applied to busbar post or lateral post. It should be discussed with manufacturer if the prohucts are used for knife switch post.