Find Verified Centrifugal Casting Radiant Tube For Furnace Suppliers, Manufacturers and Wholesalers

Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries.
Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace.
As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc.

Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron
The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit..
Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks
Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel.
The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.

Manufacturer insulating light weight insulating refractory mortar castable is a kind of unshaped refractory made of granular and powdery material, in which add a certain amount of binder and water together. It has high mobility, is suitable for casting construction, and can be hardened without heating. Refractory castables consist of refractory aggregates, powders, binders, admixtures, water or other liquid materials. Generally in the use site, it is molded by pour, vibration or tamping method, and can be used as preforms. Refractory castables are mainly used in the metallurgical industry furnace, also in the petroleum, chemical, building materials, power and machinery industry furnace and thermal equipment.
We could offer you the best refractory castable as following:
1.High alumina castable.
2.low cement refractory castable.
3.corundum castable.
4.Self flowing refractory castable.
5.Corundum mullite castable.
6.Silicon carbide castable.
7.Zirconia Refractory Castable.

8.Lightweight insulation Refractory castable

Features and Advantages of refractory castable:
1. High refractoriness, High refractoriness under load.
2. High density, low porosity.
3. Good slag resistance and corrosion resistance.
4. High strength and wear resistance.
5. Good resistance to flake performance.
6. Good thermal shock stability.
7. Scouring resistance
8. Good hot strength.

Our organization is in the league of reliable organizations, offering Boiler Spares. Customers can purchase a wide gamut of Blower, S.S Air Nozzles, Windbox Air Nozzle, Screw Feeder and Rotary Feeder, under this category. All our products are developed by a team of skilled personnel, following industry laid norms and guidelines. To meet the diverse demands and needs of the customers, we offer these boiler spare in different sizes and specifications.

Brand GE
Material of Construction CAST IRON
Model Number IBL, THERMAX, IJT ETC
Grade HICH CHROME
Type HEAT RESISTANT
Size 3 inch
Features HIGH ANGLE FOR VELOCITY DEVELOPMENT
Usage/Application BOILERS , FURNACES
Our fire bars are made of high quality Cast. Iron with chrome content 1.5% to 2%.We have special grade fire bar made for husk, coal and wood. Our fire bar is capable of withstanding high temperatures and is of robust construction. Our slim design fire bar allows the fire bar core temperature to minimum level due to better cooling.

White And Yellow Beeswax Food Grade For Cosmetic / Soap / Lip Balm

Basic Information
Place of Origin:
Henan, China (Mainland)
Brand Name:
Super-Sweet
Certification:
ISO, HACCP, FDA, GMP
Model Number:
SS1001
Minimum Order Quantity:
1000KGS
Price:
$5.9-7.9/KG
Packaging Details:
25KGS/BAG
Delivery Time:
7days
Payment Terms:
T/T, L/C, Wester Union, Cash, D/P, D/A
Supply Ability:
2000TONS

Product Description
Top quality cosmetic grade 100% natural pure bulk beeswax pellet for wholesale





SUPER-SWEET is one of the leading China beeswax suppliers and manufacturers, our professional factory is

able to produce natural and organic beeswax with cheap price and high quality. Welcome to wholesale pure and

raw bees wax, and to buy bulk products from us.





Pure Beeswax is one of nature's perfect products. Made by industrious honey bees from the nectar of flowers, beeswax has a sweet, natural fragrance all its own.



Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging.

The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow

beeswax.

C.A.S. number 8012-49-3



Beeswax is best wax for making candles by virtue of following points:

1. The only candle that emits negative ions to purify, cleanse, improve air quality, and invigorate the body.

2. The natural scent of beeswax has a harmonizing effect, benefit those with environmental allergies, asthma

and sensitivities.

Vacuum Precision Casting Furnace

Vacuum precision casting furnace is designed for Melting heat-resistant high-temperature alloy material,and Casting of Equiaxed under vacuumed condition as well as for directionally solidified (DS) or single crystal (SC) structures .
Efficiency :Crucible Basket to ensure fast crucible exchange and continuous operation.

Easy operation: Humanized operation interface; rotary tower charging and temperature measuring devices to freely switch between load charge material and read temperature.

OD : 100 mm 350 mm
Wall Thickness: 8 mm and above
Height : 350 mm (Maximum)

Quartz, the main component of glass, has a variety of different applications in various industries such as construction granulates and solar panels. It's a hard, crystalline mineral made up of silicon and oxygen atoms, and it's also the second most widely available mineral in the earth's crust after the feldspar

Quartz mineral has hexagonal-shaped crystals. The color range for quartz is massive. This adaptable mineral is both long-lasting and chemically inert, with high heat resistance and electrical qualities.
We source the majority of our quartz minerals from the regions of Rajasthan, Bihar and Andhra Pradesh.
It is an extremely useful mineral in the manufacturing of solar panels, semiconductors and electronics, aluminium and steel alloys, and also in the construction sector, after being transformed into silicon (Si) through gaseous reduction at high temperatures.
The physical properties of the quartz mineral are chemical inertness, thermal stability and electrical properties. It is also known for its hardness and it ranks 7 on the Mohs scale.
Our high-purity quartz mineral finds its usage in the manufacturing of the casting of silicon for photovoltaic cells that make up solar panels and semiconductor components.
Quartz is a hard, crystalline mineral composed of silica (silicon dioxide). The atoms are linked in a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall chemical formula of SiO2.
Within the sector of aluminium and iron & steel industries, quartz pebbles once converted to silicon, are critical components in the production of ferro-alloys and silicon for aluminium alloys and silicone.
Further, in the refractories, high-grade quartzite-based silica minerals have been used in the fabrication of linings for the coreless induction furnaces for melting and retaining iron for decades.
We at Aryan Tiles will keep its development efforts focused on developing new markets for its high-purity quartz products that promote the usage of renewable energy sources like solar power cells.

Vacuum Casting Furnace Introduction:

As the most experienced Vacuum Casting Furnace manufacturer in China, ShinTek Vacuum Casting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on…

Vacuum Casting Furnace Specifications:

Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500
Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5
Load (KG) 10 25 50 100 200 500 1000 1500
Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW
Voltage 300V 175V 375V 375V 375V 700V 700V 700V
Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz
Max. temperature 1600?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 6.7*10-3Pa
Leakage rate =4Pa/h
Remark: The Vacuum Casting Furnace can be customized for your specific project.

Vacuum Casting Furnace features:

(1) Vacuum Casting Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Casting Furnace – Suitable for most of metallurgy industries, can be customized for users;
(3) Vacuum Casting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system.
(4) Vacuum Casting Furnace – Two feeding method for choose: Manual or Semi-continueous;
(5) Vacuum Casting Furnace – Friendly control system.

Sample size:dia60xhz300mm
Max temp:1600deg.C
Working temp:1500deg.C
Vacuum: 10pa
Accurancy:+-1deg.C
Heating element:mosi2 heating element
Controller:30 steps program and pid auto control
Thermocouple:b type


120kgs

Main Specifications:
Inside Chamber Size dia60x300mm(diameter2.5" x 12")
Standard Working Temperature 1650 . C ( continuous )
Maximum Working Temperature 1700 . C ( < 3 hrs)
Temperature Control 30 steps programmable and PID automatic control
Heating Rate 0~10 . C / min (suggestion: =< 10 . C)
Temperature Accuracy +1 . C
Heating Element MoSi2 heating elements
Working Voltage AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power 5 KW
Net Weight 150 Kg


Plastic paper inside, Polyfoam filled, Wooden box outside.

1.Evenness and precision of control.
2.The gases can be hydrogen, ammonia or air.
The blue tungsten oxide furnace, also called turning tube furnace, is a must device in the powder metallurgy industry (especially the metallurgy of tungsten and molybdenum), whose main use is to turn the semifinished product apt (ammonium paratungstate) into blue tungsten oxide and molybdenum through the proper control of temperature, time, inside atmosphere and pressure in furnace. The pif-regulated control system, for the temperature control, consists of the thermal coupler, temperature controller and controllable silicon trigger and features its evenness and precision of control. The staying time of furnace materials can be set by changing the rotation speed and slant of the furnace tube on the basis of the process requirements. The gases in the furnace chamber can be customized as hydrogen, ammonia or air.

All furnace features
1. 30 Segment Programmable Temperature Controller
2. High quality MoSi2 or SiC Heating Elements.
3. Double Shell Design to low outside Furnace Temperature <60C
4. Fashional Auto Control Option
5. High Quality Type B Thermocouple
6. Max. Heating/cooling Rate: 3 oC/min below 1500C, 3 oC/min above 1500C
7. Temperature Accuracy: +/- 1 oC

This kind of cast spiral rotary furnace retorts is produced by your drwaings or we can design by your need.

Wooden package or by your required

They are made of pp, screw cap, there are graduation from 5ml till 50ml, widely used in hospital and laboratory.

51.5*32*41.7cm, g.W./n.W.:7.6/6.4kg

Metal stamping dies, fine blanking dies, die-casting dies, plates, tubes, profiles, undercutting, punching, stretching, bending,

PP contains no polar groups and has excellent electrical insulation properties. Its water absorption rate is less than 0.01%. PP is a semi-crystalline polymer with good chemical stability. Itis stable to most chemical except strong oxidizers. Inorganic acid, alkali and salt solutions have almost no damaging effect on PP.
PP has good heat resistance and low density. Its melting point is at around 165â??. It has high tensile strength and surface hardness and good environmental stress crack resistance.It can withstand 120â?? continuously.
Sinopec is the largest PP producer in China,Its PP capacity accounted for 45% of the country's total capacity. The company currently has 29 PP plants by the continuous process (including those under construction)
PP Application
PP has a variety of applications. It is suitable for multiple processing methods such as injection molding,extrusion molding and blow molding and is widely used in the textile,packaging, electrical household appliances, automobile and real estate industries.
PP Injection Grade Application
PP impact copolymer is widely used in the production of industrial products,such as dashboard, auto interior decorations, auto bumpers, interior and exterior parts of washing machine, accumulator containers and tanks. It can also be used to make household articles, such as bottle caps, cookware, furniture, toys, toolkits, travel cases, bags and various packaging containers.
PP Application
PP homopolymer is widely used in the production of small electrical household appliances, such as electric kettles, electric utensils, electric irons,air heaters,electric hair,dryers, electric toasters and electric hand dryers.
PP random copolymer� Application
PP random copolymer is widely used in the production of medical appliances with high transparence, such as medical syringes, medical infusion bottles,medical centrifuge tubes and sample tubes. It is used in the production of food containers,stationery, packaging materials and houseware.

Electric Furnace
Electric furnace AEMF120
Electric furnace AEMF120 is specially designed to be used to melt metal alloy (zinc alloy and tin alloy) for rubber mold centrifugal casting purpose.
Features:

Automatic control.
Energy saving Insulated protection shield and head.
Safety circuit to prevent overheated.
Temperature rises rapidly.
Automatic consistent temperature control.
Appointment heating start/stop time.
Casted iron crucible.
Specification:
Power: 9KW.
Loading capacity: 80kg (zinc alloy)
Temperature: 600 deg; C max.


Electric furnace EMF120
Electric furnace EMF120 is specially designed to be used to melt zinc alloy and tin alloy for rubber mold centrifugal casting purpose.
Features:
Automatic control.
Energy saving Insulated protection shield and head.
Safety circuit to prevent overheated.
Automatic consistent temperature control.
Appointment heating start/stop time.
Casted iron crucible.
Specification:
Power: 9KW.
Loading capacity: 80kg (zinc alloy)
Temperature: 600 deg; C max.


Electric furnace EMF50
Electric furnace EMF50 is specially designed to be used to melt lead alloy, magnesium zinc alloy for rubber mold centrifugal casting purpose.

Features:
Automatic control.
Insulated protection shield.
Safety circuit to prevent overheated.
Automatic consistent temperature control.
Appointment heating start/stop time.
Specification:
Power: 6KW.
Loading capacity: 50kg (lead alloy)
Temperature: 600 deg; C max

Lucy.Li at jsmsinudstry dot com
1.Products including: furance rolls. The od from min.50mm to max.1600mm. The shells are produced by centrifugal castings.

2.Application: the various furnace rollers are used in the furnaces for steel mills, like cal(continuous annealing line),
Cgl(continuous galvanizing line).It is characteristic of heat resistant, corrosion resistant and wear resistant,

3.Material for centrifugal barrels: 24/24nbtz, g18/8nicr, 28cr/48ni/5w, 25cr/20ni, 24/24nicrnb(1.4855),
25cr/35ni(1.4852), 38ni/18cr(1.4865), 2.4633, 2.4879 or at customers request.
Forged shafts: 310 stainless steel, en8, en24 etc.

4.Welding consumables: aws a5.11 nicrfe-3 2.4807 or 182ks or as per the buyer's requirements

5.Working temperature: depending on the materials(average: 800-1200¡æ)

4.Quality control:
We carry out very strict quality control from raw material to each step of the process, until the finished product is dispatched. To make sure the highest quality possible, each test is carried out strictly with our in-house testing facilities. The most generally used methods of testing given below:
Chemical analysis by spectrometer
Mechanical tests in normal and high temperature.
Ultrasonic, x-ray, dye penetrant test.
Boroscope; eddy current testing; microscope ; pressure tests.


Furance rolls. The od from min.50mm to max.1600mm.

Slurry pump refers to speak refers to through the use of centrifugal force (pump impeller rotation) role of solid, liquid mixed media energy increase of a mechanical, electrical energy into the medium of kinetic energy and potential energy of the equipment. Mainly used in: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industry sectors.

Slurry pump conveys a mixture of solid particles containing dross and water. But from the principle of slurry pump belongs to a centrifugal pump, in the iron and steel enterprises are mainly used for converter dust water, blast furnace gas scrubbing water, continuous casting turbid ring water and rolling steel turbid ring water and other systems of slurry transport.

It is produced by melting manganese ore, coke, and iron ore in a furnace . The resulting product is a dark gray powder or lump that is used in the production of steel and cast iron .

FeMn is an important alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product . It is widely used in the steelmaking industry and has become an essential deoxidizing agent and additive in the steelmaking industry.

In summary, Ferro Manganese (FeMn) is an alloy of iron and manganese, containing usually about 80% manganese. It is produced by melting manganese ore, coke, and iron ore in a furnace. FeMn is used mainly to counteract the bad effects of sulfur, acts as a deoxidizer, and imparts metallurgical properties such as increased strength, hardness, toughness, and hardenability. It is available in different types and can be used for various applications, such as cladding, decking, ceilings, walls, and saunas.