1.Products including: straight radiant tubes, w-type tubes, u-type tubes, electric radiant tubes. 2.Application: the various radiant tubes are used in the furnaces for steel mills, like cal(continuous annealing line), Cgl(continuous galvanizing line). 3.Material: High nickle and high chrome heat resistant alloy. We can cast standard alloy like astm, din, bs etc. 37/18nicr, 37/18 hu alloy, 48/26 22h alloy, 38/18nicr(1.4865), 24/24nbtizr, 50cr/50ni(2.4813), 1.4410, 1.4059, 1.4841, 1.4845, 1.4848, 1.4825, 1.4852, 2.4879 or as per customer's requirements 4.Quality control: We carry out very strict quality control from raw material to each step of the process, until the finished product is dispatched. To make sure the highest quality possible, each test is carried out strictly with our in-house testing facilities. The most generally used methods of testing given below: Chemical analysis by spectrometer Mechanical tests in normal and high temperature. Ultrasonic, x-ray, dye penetrant test. Boroscope; eddy current testing; microscope ; pressure tests. Straight radiant tubes, w-type tubes, u-type tubes, electric radiant tubes.
Lucy.Li at jsmsinudstry dot com 1.Products including: furance rolls. The od from min.50mm to max.1600mm. The shells are produced by centrifugal castings. 2.Application: the various furnace rollers are used in the furnaces for steel mills, like cal(continuous annealing line), Cgl(continuous galvanizing line).It is characteristic of heat resistant, corrosion resistant and wear resistant, 3.Material for centrifugal barrels: 24/24nbtz, g18/8nicr, 28cr/48ni/5w, 25cr/20ni, 24/24nicrnb(1.4855), 25cr/35ni(1.4852), 38ni/18cr(1.4865), 2.4633, 2.4879 or at customers request. Forged shafts: 310 stainless steel, en8, en24 etc. 4.Welding consumables: aws a5.11 nicrfe-3 2.4807 or 182ks or as per the buyer's requirements 5.Working temperature: depending on the materials(average: 800-1200¡æ) 4.Quality control: We carry out very strict quality control from raw material to each step of the process, until the finished product is dispatched. To make sure the highest quality possible, each test is carried out strictly with our in-house testing facilities. The most generally used methods of testing given below: Chemical analysis by spectrometer Mechanical tests in normal and high temperature. Ultrasonic, x-ray, dye penetrant test. Boroscope; eddy current testing; microscope ; pressure tests. Furance rolls. The od from min.50mm to max.1600mm.
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
Lead slag produced from rotary furnace lead percentage is 20 to 25%
Pularin: Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball. Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting. where? 1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University. Cost: 150 times costlier than gold. 10 grams pularin $23000 to $45000 also info given by Bucky-USA website. Special uses if this becomes common: 1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc. 2)Bullet proof ackets 3)curing cancer etc.
