Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Best quality api 7-1 standard and sprial drill collar Product description Drill collar is the basic component in the bha which provide weight on the bit for dirlling and keeps the drill string in tension.Drill collar is manufactured from aisi 4145h modified quenched and tempered steel and is heat treatment along its entire length for uniform toughness and durability. Srict netallurgical test are performed pre specifications to ensure that the heat treatment produces consisitent and maxium hardness through the depth of the bar. Feartures and benefits: 1. Hardness rannge of 285 to 341 bhn and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature 2.Connections ar phosphate coated afther machinning to protect the threads from corrosive elements and to prevent galling upon initial make -up Thread roots are cold rolled on api and h0-90 connections 3.Pressed steel thread protectors are supplied fo all drill collar that are equipped with standard connection
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill. Materials: Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available. Trepanning and Heat Treatment: Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface. Traceability: Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies. Rigid Inspection Procedures: We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar. Rolling: Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation. Phosphate-coated or Copper Plating: All connections are phosphate-coated or copper plated to improve resistance to corrosion. Slip Groove, Elevator Groove and Size: Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines. Thread Protectors: Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Grade.A Type. Elettaria (Green cardamom) Size.5.5mm to 8mm Curing Method. Natural(sun)Drying Husk.28.0-38.0 % Seed.62.0-7.0 % Volatile extract.7.5-10% Non volatile ether extracts.2.2-2.4 % Starch.39.1-43.7 % Fibre.8.4-9.3 % Protein.97-140 % sizes are 5, 6, 7, 8 mm broken matter 1-2% Immature Cardamom: 5% by count Thrips: 3 by count
Grade.A Type. Elettaria (Green cardamom) Size.5.5mm to 8mm Curing Method. Natural(sun)Drying Husk.28.0-38.0 % Seed.62.0-7.0 % Volatile extract.7.5-10% Non volatile ether extracts.2.2-2.4 % Starch.39.1-43.7 % Fibre.8.4-9.3 % Protein.97-140 % sizes are 5, 6, 7, 8 mm broken matter 1-2% Immature Cardamom: 5% by count Thrips: 3 by count
The material and functions: 1. Hydrophilic non-woven: soft, make baby more comfortable. 2. Super Absorbent Polymer: Absorb the liquid effectively and instantly, keep surface dry all day to avoid wet back. 3. Blue Acquisition Distribution Layer: Make the liquid infiltrate quickly, prevent rewet and keep Baby's skin dry and clean. 4. Lamination film: breathable, prevent leakage and keep fresh. 5. PP tapes: go well with frontal tape, they can be used as many times as need. 6. Magic tapes/BIG ELASTIC EARS: can be used for many times, and big elastic ears are much more convenient for a better fit. 7. 3D rounder: avoid any side leakage. 8. Elastic waistband: Provide baby with a snug, comfortable circumstance. Pampers Diapers Huggies Diapers Earth's Best Diapers Pampers Newborn Pampers Maxi Pack Mini Pampers Maxi Pack Midi Pampers Maxi Pack Maxi Pampers Maxi Pack Maxi plus Pampers Giant pack Maxi Pampers Giant pack Maxi Pampers Giant pack Maxi plus
The material and functions: 1. Hydrophilic non-woven: soft, make baby more comfortable. 2. Super Absorbent Polymer: Absorb the liquid effectively and instantly, keep surface dry all day to avoid wet back. 3. Blue Acquisition Distribution Layer: Make the liquid infiltrate quickly, prevent rewet and keep Baby's skin dry and clean. 4. Lamination film: breathable, prevent leakage and keep fresh. 5. PP tapes: go well with frontal tape, they can be used as many times as need. 6. Magic tapes/BIG ELASTIC EARS: can be used for many times, and big elastic ears are much more convenient for a better fit. 7. 3D rounder: avoid any side leakage. 8. Elastic waistband: Provide baby with a snug, comfortable circumstance. Pampers Diapers Huggies Diapers Earth's Best Diapers Pampers Newborn Pampers Maxi Pack Mini Pampers Maxi Pack Midi Pampers Maxi Pack Maxi Pampers Maxi Pack Maxi plus Pampers Giant pack Maxi Pampers Giant pack Maxi Pampers Giant pack Maxi plus
Premium quality Basmati rice in 10 lbs bags. Liquidation sale stock available in Toronto pickup or free delivery.
Premium quality jasmine rice in 8kg bags. Liquidation sale stock available in Toronto pickup or free delivery.
Product: Canadian Iron Millscale Minimum Fe content is 70%,
We Can Supply Pantene Pro-v Miracles Voluminous and Cool 7 in 1 Non-aggravating Oil 100ml Please Don't Hesitate to Contact Us in Case of Any Interested
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 93100-Sï¼? For ages 6-12 Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For kids 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 93100: 3-ply, non-woven material 99% BFE at 3 micron Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 91100: 4-ties Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: L 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 93100: 3-ply, non-woven material 99% BFE at 3 micron Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for easier breathing. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: L 3. Color: White 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire 8. Flavor: Citrus
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for easier breathing. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: L 3. Color: White 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire 8. Flavor: Mint
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for ear 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: Black diamond 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
