Size:nw25....Nw1000 mm Pressure:pn6...Pn16 Pneumatic actuator on/off or proportional control 20 pcs
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4 Mounting Base-ISO5211 Temperature--20 C - +80 C
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4
Specifications Design Standard : IS/ISO 13095 | API609 | BS5155 Testing Standard : API 598 | IS/ISO 13095 Face to Face : As per IS/ISO 13095 | API609 | BS5155 Pressure Rating : PN 10 | PN 16 End connection : Wafer type | Lug Type | Flanged End Type. Body : CI, SGI/DI, WCB, CF8, CF8M, Super Duplex, etc. Disc : SGI/DI, WCB, CF8, CF8M, Duplex, Nylon Coated, Rubber Coated etc. Seat : EPDM, Nitrile, Viton, Hypalon, Silicon, PTFE etc. Operation : Pneumatically Actuated | Electrically Actuated (Motorized) Actuation Variants Single Phase / 3 Phase / DC Power Options Available, Local Control / Remote Control Options Available, Manual Over Ride for operation in case of Power failure, Valve positioning at intermediate positions, Feedback via Limit Switches & Torque Switches
Pneumatic actuated ball valve manufacturer Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown. Features of Pneumatic Actuated Ball Valve It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features. The ability to open and close quickly. The actuator is small. Are you seeking for a reputable manufacturer of pneumatic ball valves With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality. Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316 Class 150 to 2500 Nominal Pressure PN6 to PN450 Size 12 to 48 Ends Flanged, Buttweld, Socket weld, Threaded. Operation Pneumatic Actuated For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve. If you are looking for more details, kindly visit our website.
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve.
Pneumatic Actuator Ball Valve The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve.
Electro Thermal Heating Valve 1.NO/NC 2.12VDC/24VDC/110VAC/230VAC 3.Power:2W 4.Stroke:3mm-5mm Detailed description: Certificate: EN215 ,CE ,ISO9001:2008, ISO14001:2004 Material: Brass Size:DN15/DN20/DN25 Angle/Straight Valve Voltage: DC12V,DC24V,AC110V,AC230V(220V) Power Consumption: 2W Thrust:110N IP54 Starting Time: 3-5min Join Size: M30*1.5mm Environment Temperature :From -5C°to 60°C Wire Length: 1000mm skype: gao.jingxia jessie.gao at smartlifetech.net
Voltage: 230V 24V Status: NC NO Core: Chinese Core or Vernet Core Power Consumption: 2VA Thrust: 110N Stroke: 3mm Running time: 3-5min Connection size: M30*1.5mm Ambient temperature: From -5degree to 60degree Cable Length: 1000mm
Working environments: Temperature: -30'c~+70'c(can be customized to -45'c~+85'c) Relatively humidity: 95%(25'c) Pressure: 86kpa~106kpa Power supply: Single phase: 220v 50hz three phase:380v 50hz Tolerance: single phase voltage(-15%/+10%) three phase voltage(¡¨¤10%) Frequency(¡¨¤5%), harmonic content (
1the input signal: 4--20ma dc 2the input resistance: 250 ohm 3input passage: 14 basic error: 1%, 2.5% 5deviation: 1.5% 6deadline: 0.5%--3% continuously adjustable (according to the indication of system) 7damping characteristic: no-oscillating 8power supply: three-phase 380v50hz, single-phase 220v50hz for selected 9working conditions: temperature: integral-type -10-- +55, separate-type -25 -- +70 Humidity: 85%the surrounding air does not have the corrosive elements 10protection rank: it conforms to the iec145 ip65 standards. (excluding the separate-type gamx with waterproofing and dustproof functions fixed in rooms), bus type and intelligent type ip67. 11the cut-off signal protection: it can be divided into all-on, all-off and home position according to your instructions. Generally it is set into the home position when it is manufactured. Wooden case
Specifications: Media: Air (dry or lubricated) Non-corrosive gas or light hydraulic oil Construction: Suitable for indoor or outdoor installation Material: Housing - Aluminium Alloy Drive Shaft: Carbon Steel Finish: Yellow Colour Powder Coated Rotation (Standard) Counter clockwise to open with port 'A' pressurised Spring return Actuators air fail to close clockwise Lubrication: Factory lubricated for the normal life of Actuators
The complete fluid control function integrated into a single unit. We can supplied actuators without housing. Developed to comply with the most demanding worldwide standards.
Motorized valve actuator 12v 24v 110v 220v 380v 1). CNC manufactured 2). Custom made 3). Withstand voltage:1500V 4).IP code:IP67 Electric Actuators: 24V DC, 24V AC, 110V AC,220V AC NEMA 4 and NEMA 7 enclosures Manual override Visual indicator Our electric valve actuator are so advanced that you Should not miss them: 1. Powerful function: Intellectual type, proportion type, switch type and all Kinds of signal output type 2. Small size: the cubage is about 35% of the same kind products 3. Light weight: Only 30% of other products 4. Reliable performance: Bearings and threaded electric components used are Made by famous maker in the international market 5. Good looking: Adc body and cover: Fine and smooth 6. Precise and wearable: the worm gear output axletree integrative is made by Special AC alloy which has high intensity and good abrasion resistance 7. Low tolerance: the output shaft of the worm wheel is produced by integration Design, which Avoid clearance of key joint, therefore the transmission precision rate is Higher. 8. Safety: AC1500v test, spedal made cord lock 9. Simple: One phase power supply wiring is very simple 10. Convenience: No oil filling no maintenance waterproof. Any angle setting 11. Protector: Double-limit, overheat protection, overload protection (choose What you like ) 12. Three speeds: You can choose stroke time 5 10 15 30 60 100 sec and so on 13. Anticorrosion and antirust: Bracket, couplings and coupling screw made of Stainless steel 14. Intel1igent numerical control: Coupling and screw are all made of stainless Steel 15. Integration; Intelligent controlling module integrated in the body of the Electric actuator, it is no need to connect extra positioner.
Pneumatic valve actuator description: 14 types ( da 32- da 270 ). Offering a broad range of pneumatic rack & pinion actuators. The ports are namur standard for easy solenoid valve connection. Iso 5211 dimensions on all sizes. All internal and external surfaces are anodized for corrosion resistance. Actuator have a regulation range from-4° to +4°. Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle. Actuator can be lifted on many styles of quarter-turn valve, including ball, butterfly and plug and dampers. Pneumatic valve actuator operation: Working pressure: 2.5 bar – 8 bar. Working temputure: Standard range: -20? - +80?. Low temperature range: -40? - +80?(hnbr). High temperature range: -20? - +150?(vition). Factory lubricated for life under normal vorking. Operating media – dry or lubricated air, non-corrosive and inert gas or light hydraulic oil. Angle of rotation: 0° to -90°± 4°.
Actuator: Torque: 500n, 1000n, 1800n, 3000n Control type: modulating / 3-point floating Input signal (for modulating): 0 ~ 10v or 0 ~20 ma Compatible with johnson controls actuator, such as va-7152-1001, 7200-1001, va-7202-1001, ra-3000, ra-3041, etc Manual override is optional 2 port brass valve: Dn: 15 / 20 / 25 / 32 / 40 / 50 / 65 / 80 Equal percentage. Compatible with johnson controls brass valve
valve type:butterfly valve valve body and disc: UPVC valve seat: EPDM valve stem: SS304 valve size: DN25-DN200, 1"-8" end connection: wafer media: water,oil,gas etc working pressure: PN10bar working temperature:-20C-+120C air pressure: 3-8bar actuator type: rotary 90degree
Summary DKJ quarter-turn electric actuator and DKZ linear-turn electric actuator are the earliest and the only products in our country. The products pool the wisdom of all the experts in our country during the planned economy time. Our engineers devoted themselves to this project in the early period, made great contributions to push the DKJ and DKZ series to the market and laid the foundation of enterprise's professional development. It is used in large-scale state-owned enterprise with simple-structure and economical and practical merits in the early period. With the development of modern industrialization and computer management, we make two outstanding improvements compared with the previous DKJ, DKZ series nowadays 1.We have already produced the electric intelligent type product, outdoor type, anti-explosion type and other improved products which are directly controlled by computer. 2.The steering circuit is fixed into a small plastic casing (generally called module), forming the PNP type that is easy to maintain. It functions as the higher regulating precision and longer using life. Our actuators have the most standard outlook size, which have played a key role in reconstructing projects of many large-scale enterprises. Principle of work The DKJ, DKZ series electric actuator are the terminal control device of industrial process survey and the control system, changing the system¡¯s control signal into angular displacement, linear displacement of output axle, the position of valve and other regulating units. The main purpose is to enable the controlled medium to work well under the regulated system conditions. The electric actuator is divided into the proportion type and integral type according to the controlling type. The proportion actuator is made up of electric servo amplifier and integral type actuator that can compare systematic control signal with the feedback signal (closed-loop control) of output axis so as to change the travel route and has proportion relations with the output axis signal. The integral actuator consists of servo motor, reducer and position transmitter. Coordinating with motor operator, it can control valve or other regulating units from long distant. wooden case
Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598 Features and Benefits Wider EPDM seat, replaceable, its suit for different type of flanges. ISO5211 standard top flange, suit for different operations. Eccentric pin on the stem, not destroy stem structure, make sure the safety. Temperature overload protection. Free switch between hand and electric. IP67 protection level. Both ON/OFF type and Regulating type actuator available. Technical Data Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16 Working temperature: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc. Power supply voltage: 220V Protection level: IP67 Environment temperature: -5C ~ 70C Working environment: No corrosive flammable medium, no explosive medium
